Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Fast, Reliable Fence Installation Across Tiburon
We install and repair fences in Tiburon the way this town’s conditions actually demand. That means hot-dip galvanized or 316 stainless hardware on anything the salt air touches, deeper post footings on slopes, and gate frames built to survive a decade of fog-belt moisture, not two summers of it. A basic wood fence in Tiburon usually runs $3,500 to $9,000, and we tell you which number in that range is yours before any work starts. Our technicians have up to 12 years of experience, and every job is covered by the 730-Day Done Right Promise. Call (866) 320-2646 for a free estimate.
Why Groundwork Construction Co. of San Francisco Is Tiburon’s Preferred Fence Installation Company
Fences here fail differently than they do a few miles inland, and most of the outfits that cross the bridge don’t price for it. We do. When we quote a fence in Tiburon, the estimate shows the coastal-spec hardware as a line item so you can see exactly what the difference costs instead of discovering it when a gate sags three winters from now.
Homeowners on the hills above Main Street and around Belvedere call us because we ask the questions other contractors skip: where does the runoff go, how does material reach the back of the lot, and what’s the salt exposure on this side of the ridge. Those three answers change the job more than the finish does.
Our technicians are background-checked and arrive in uniform. Calls are answered by a live person, 24 hours a day, 7 days a week. And every fence we put in carries the 730-Day Done Right Promise, in writing. If it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Our Fence Installation Services in Tiburon
Our Fence Installation team handles the full range of fence work in town, from a single gate rebuild on a Belvedere slope to a full perimeter of privacy fencing on a hillside lot. Here’s what we do most in Tiburon.
Wood Fence
Wood is still the dominant fence material in Tiburon, and it’s also the one most often installed with hardware that dies early. We specify hot-dip galvanized post bases and stainless fasteners on bayfront and Richardson Bay-facing slopes so the metal outlasts the boards it holds. Around the older shingle and stucco cottages near downtown, we also match fence height and picket proportion to the house instead of dropping in a stock panel.

Fence Gates
Gates are where corrosion announces itself first, because every swing flexes the hinge and latch hardware. We build gate frames with reinforced corners and stainless hardware, and we set gate posts with footings sized for the slope and drainage rather than a standard 18-inch dig. On steep driveways, we also hang gates to clear the grade change so they don’t drag through the wet season.

Aluminum Fence
Powder-coated aluminum is the practical choice for anyone who wants a fence they won’t repaint, and it holds up better than wood against salt air when the coating is intact. We use aluminum for pool enclosures, property lines along the waterfront, and low ornamental runs where a wood privacy fence would block the view. If a rail section gets nicked and starts to corrode, we handle the repair too.

Chain Link and Iron Fence
Chain link still has a place on working lots and dog runs, and galvanized-after-weave chain link lasts far longer here than the electro-galvanized version. Wrought iron and steel ornamental fencing look right against Tiburon’s older estates, and we finish those with a zinc-rich primer and marine-grade topcoat so the rust doesn’t creep out of the welds.
Vinyl, Privacy, and Commerical Fencing
Vinyl fencing in Tiburon runs $3,500 to $9,000 installed, and it’s a solid fit for newer hillside homes where low maintenance matters more than authentic wood texture. For privacy runs, we size boards and rails to the exposure; for commercial properties around the downtown core, we handle code-compliant heights and sight-line requirements as part of the plan.
Trusted Brands We Service in Tiburon
We work with a curated set of material partners across every trade, including James Hardie for siding and trim components that pair with fence lines, KraftMaid and Wellborn for the cabinetry projects homeowners often schedule alongside exterior work, and Cambria for countertops. On fences specifically, we match the brand of hardware and coating to the exposure rather than defaulting to whatever’s on the shelf. We don’t stock parts locally; we specify and order the right hardware for your lot, and we tell you the lead time up front so the schedule is honest.
See the difference
Before
After
Before
After
Before
AfterCommon Fence Installation Problems We See in Tiburon Homes
- Hardware that snaps at the shank. Electro-galvanized screws and post bases survive a decade in Corte Madera or San Rafael but chalk out in a few seasons on the bayfront. When the shank corrodes through, the gate frame pulls loose and the whole run goes out of plumb.
- Rotted posts where wood meets soil. Fog-belt moisture cycling on south- and west-facing slopes rots untreated posts and bottom rails first. The fence leans, pickets drop, and by the time it’s visible the post is gone below grade.
- Footings undermined by runoff. Wind-driven rain on steep lots finds any post dug shallow or set without drainage. The post moves, the line goes out of plumb, and no amount of re-nailing fixes it.
- Wind and salt on waterfront runs. Solid privacy panels catch the full bay breeze, and every fastener takes the salt load. Fences built without bracing for that wind load come apart at the rails first.
Pricing for Fence Installation in Tiburon, CA
Fence work in Tiburon runs $3,500 to $9,000 for a typical residential installation, and the spread inside that range is driven mostly by hardware spec and site access, not linear footage alone. Here’s how the two most common jobs price out. Estimate is free, and the number we quote is the number you pay.
| Service | Tiburon Price Range |
|---|---|
| Vinyl Fence Installation | $3,500 – $9,000 |
| Aluminum Fence Installation | $4,000 – $10,000 |
The coastal-spec version of a job costs more up front than the inland-spec one, and it’s the cheaper decision over ten years. Stainless and hot-dip hardware, sealed joints, and proper drainage add a modest line item today. Skipping them buys a gate rebuild in year four. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off.
We Also Serve Cities Near Tiburon
We handle fence installation in Tiburon and the surrounding communities, including Tamalpais-Homestead Valley, Corte Madera, Mill Valley, and Larkspur. The exposure and access are different in each, so the hardware spec changes with the town. If you’re just over the ridge, we’ll tell you which spec applies to your lot.
Serving Tiburon, CA – Our Local Coverage Area
We serve Tiburon and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Fence Installation in Tiburon
Salt air off Richardson Bay and the bayfront corrodes galvanized hardware far faster than San Rafael’s inland air does, so post bases and fasteners that last a decade there can snap in a few seasons here. Swap in hot-dip galvanized or 316 stainless and the post outlives the fence. Call (866) 320-2646 and we’ll tell you which spec your lot needs, free.
Coastal spec means hot-dip galvanized or 316 stainless hardware throughout, sealed end cuts and joints, drainage designed into every footing, and a marine-grade finish on any metal. Inland spec uses standard galvanized hardware and shallower details. The coastal version costs more up front and less over ten years. Call (866) 320-2646 for a quote on both.
Most fence installations in Tiburon require a permit, and height limits and setback rules vary by lot and by proximity to the shoreline. We check the requirements for your address before ordering material, so the fence doesn’t get built twice. Call (866) 320-2646 and we’ll walk you through what applies to your property.
Yes, but access drives the plan. On steep Belvedere-area lots and the hillside streets above downtown, a truck often can’t reach the property, so material gets staged by hand, walked in, or lifted over the roofline. A qualified local pro plans that before pricing the job. Call (866) 320-2646 for a site visit and a real number.
Powder-coated aluminum lasts longest where the salt spray hits directly, provided the hardware is stainless. Wood comes second, and only with hot-dip galvanized post bases, stainless fasteners, and heavy treatment on the posts. Vinyl holds up well but can go brittle in full sun. Call (866) 320-2646 for a recommendation based on your exposure.
Fence work in Tiburon is a materials decision disguised as a construction project. The boards matter, but the fasteners, footings, and access plan decide whether the fence is still standing square in ten years. We handle all of it: the estimate, the permits, the hardware spec, and the access logistics. Your estimate is free, the pricing is upfront, and the work is backed by the 730-Day Done Right Promise. Call (866) 320-2646 today and we’ll get a real number on your fence.
Written by the team at Groundwork Construction Co.