Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Unilock Construction in Tiburon, CA
Groundwork Construction Co. of San Francisco provides independent Unilock construction across Tiburon, from paver driveways on the hills above downtown to retaining walls on tight Belvedere lots. We’re not authorized, sponsored, or endorsed by Unilock; we install and repair Unilock Brussels Block, Beacon Hill, Estate Wall, and Rivercrest because we know the product line and the hillside conditions that stress it. The difference here is access and drainage: in Tiburon, a paver job is a site-engineering job before it’s a finish job. Call (866) 320-2646 for a free estimate on your Tiburon project.
Why Tiburon Residents Choose Us for Unilock Service
Steep lots punish shortcuts. That’s the whole reason homeowners around Tiburon call us: their first paver install looked fine for two seasons, then the driveway started shedding joint sand and the edges crept downhill. We’ve spent years installing and repairing Unilock systems on grades where base preparation and drainage decide whether the surface holds, and our technicians bring up to 12 years of experience to that work.
Every project is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. You get upfront pricing, a written line-item quote, and material choices matched to what’s actually on your property. On repairs, we use genuine Unilock pavers and wall blocks so visible patches match color and profile, and we don’t tear out a sound base just to sell a full rebuild. Calls are answered by a live person, 24/7, and our technicians are background-checked and arrive in uniform. That matters on a peninsula where you’re often coordinating access with a neighbor’s driveway.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common Unilock Construction Problems We Solve in Tiburon
Tiburon’s mix of slope, salt air, and old landscaping produces a predictable set of failures. These are the ones we see most:
- Paver migration and joint sand loss on sloped driveways. Winter storms send surface water down the grade, and if the edge restraint wasn’t set into the slope, the Unilock units creep. On the steep streets above downtown, this shows up first at the apron and the low corner.
- Efflorescence and salt-air staining on lighter pavers. West-facing exposures off Richardson Bay take the salt spray, and light-colored Unilock units go chalky white. It’s mineral migration, not dirt, and it needs the right cleaning approach rather than a pressure washer turned up too high.
- Retaining wall block settlement or bulging. Original installs on steep Tiburon grades sometimes skipped proper geogrid reinforcement, and the wall leans within a few years. Estate Wall systems need the grid tied back into the hillside, not just stacked.
- Frost heave and root intrusion lifting pavers. Older installations near mature landscaping and hillside runoff channels lift at the joints, and the surface goes uneven underfoot.
- Edge failure where a patio meets the house or a deck. Fog-belt moisture cycling on south and west exposures softens the base at the transition, and the first course of pavers settles away from the flashing.
Unilock Service in Tiburon: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes every Unilock job in Tiburon: the hillside streets above downtown and around Belvedere often can’t take a standard delivery truck. That’s not a scheduling nuisance, it’s a sequencing problem. A full pallet of Unilock Brussels Block or Beacon Hill weighs more than most hairpin driveways and narrow shoulders can safely receive, so pallets get broken down and walked, wheelbarrowed, or craned to the site in smaller loads. That changes how base preparation runs. You can’t excavate, compact, and lay in one clean pass when material arrives in stages, so a qualified installer plans staging, spoil removal, and crane or pump access before pricing the work. On Tiburon jobs, access planning comes first, and the finish work follows. Generic paver pages talk about color and pattern; on this peninsula, the truck and the slope decide the schedule.
Unilock Models & Products We Service in Tiburon
We work across the Unilock lines that make sense on Tiburon properties: Brussels Block and Beacon Hill for driveways and patios, Estate Wall for retaining walls on steep lots, and Rivercrest for wall and hardscape accents. For visible repairs we source genuine Unilock units to match color, profile, and dimension, because an aftermarket paver that’s close but not exact shows up in every photo of your driveway. We don’t claim local stock; parts are ordered per job to match your existing run. Where performance is equal or better, quality aftermarket polymeric sand and drainage aggregates do the job, and we’ll tell you which is which in the quote.
See the difference
Before
After
Before
After
Before
AfterUnilock Service Pricing in Tiburon
Paver work in Tiburon runs higher than in flat Marin towns because access, staging, and drainage drive labor. These ranges reflect that reality. Every estimate is free, written line-item, and fixed before work starts, and 0% financing for 18 months is available, along with $1,000 off projects over $10,000.
| Service | Typical Range in Tiburon |
|---|---|
| Paver Driveway Installation | $7,000 – $18,000 |
| Paver Patio Installation | $3,500 – $11,000 |
| Driveway Replacement | $5,000 – $14,000 |
Call (866) 320-2646 for an exact quote on your Tiburon property. Estimates are free, and we’ll walk the access and drainage before we put a number on paper.
Serving Tiburon, CA – Our Local Coverage Area
We serve Tiburon and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – Unilock Construction in Tiburon
Yes, with the right base and edge restraint. Unilock units hold on grades when the base is compacted in lifts, tied into the slope, and the perimeter is restrained with proper edge restraint and drainage. Sand alone won’t do it. Call (866) 320-2646 for a free site review before you commit to a number.
That’s efflorescence, mineral salts migrating to the surface as moisture moves through the paver. On west-facing Tiburon exposures off Richardson Bay, salt air accelerates it. It’s cosmetic and treatable with the right cleaner; aggressive pressure washing can damage the surface.
By breaking down pallets and moving material in smaller loads, often by wheelbarrow, walking path, or crane pick. The planning happens before the base work, and it’s a big reason hillside Tiburon projects cost more than flat-lot work in Corte Madera.
Yes, when it’s engineered with geogrid reinforcement tied back into the hillside. A stacked block wall without grid will lean on a steep grade. We evaluate the soil and load before recommending a wall system. Call (866) 320-2646 for a site assessment.
Usually a few pavers can be lifted and reset if the base underneath is sound and the movement is isolated. If settlement is widespread or the base has failed, reconstruction makes more sense. Call (866) 320-2646 for a free evaluation so you know which one you’re facing.
Service Areas Near Tiburon
We serve Tiburon and the surrounding peninsula and bayside communities, including Mill Valley, Tamalpais-Homestead Valley, Corte Madera, and San Francisco. If you’re nearby and wondering whether your project fits our coverage, call and we’ll tell you straight.
Book Your Unilock Service in Tiburon Today
Ready to price your paver driveway, patio, or retaining wall? Our live team answers around the clock, and we’ll schedule a free estimate at a time that works for you. Call Groundwork Construction Co. of San Francisco at (866) 320-2646 to get started on your Tiburon project.
Written by the team at Groundwork Construction Co. of San Francisco.