Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in San Bruno, CA: What This Job Costs and How Long It Takes
Cabinets & countertops in San Bruno typically run $14,000 – $45,000 for a full kitchen’s worth of both, and most jobs take three to five weeks from demolition to final countertop install. New cabinets alone land at $4,000 – $13,000; countertops run $2,000 – $6,500 on top. Call (866) 320-2646 and we’ll walk you through a free estimate with line-item pricing, so you know exactly what your kitchen will cost before anyone swings a hammer.
How We Run a Cabinet and Countertop Job, Stage by Stage
Cabinet and countertop work is a sequencing problem more than a construction problem. Get the order wrong and you’ll be eating off a card table for two extra weeks. Here’s the real rhythm on a San Bruno job:
- Day 1-2: Template and order. We measure the room, check wall plumb and floor level, and confirm the cabinet layout. Doors, drawer banks, and filler strips get ordered now. You decide door style and finish at this point, because lead times drive everything downstream.
- Day 3-4: Demolition and rough-in. Old cabinets and counters come out, along with the backsplash if it’s going. Any plumbing or electrical changes (a relocated sink, a new outlet for a microwave) happen now, before walls close back up. This is where San Bruno’s older housing stock often surprises us with out-of-square walls or undersized framing.
- Day 5-8: Cabinet install. Base cabinets go in first, shimmed and scribed to the wall, then uppers. Crown and light rail go on. We check every door and drawer for alignment before calling the cabinet phase done.
- Day 9-10: Countertop template. Once upper cabinets are hung, we template for the countertop. Stone is cut off-site, which means a 7-10 day gap between cabinet install and counter delivery on most jobs. You decide edge profile and sink cutout before this step, not during it.
- Day 18-24: Countertop set and final fit. Countertops go in, sink and faucet get connected, and we finish the trim, caulk, and toe kick. Final walkthrough and punch list happen here, and you sign off against the written scope.
That’s a realistic three-to-five-week window. Weather doesn’t usually delay cabinet work, but a custom countertop or a specialty cabinet line can stretch the timeline by another week or two. We tell you the honest date range up front and stick to it, which is part of what the 730-Day Done Right Promise covers: if something isn’t right, we come back and fix it, no chasing us down.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make, and What Each One Costs You Later
Most homeowners spend their decision energy in the wrong place. Door style matters less than box quality, and countertop color matters less than material grade. Here’s what genuinely moves the needle:
- Cabinet box construction: Plywood boxes hold up better than particleboard over 10-15 years, especially in a foggy, damp climate. They add cost but rarely fail at the corners.
- Door material: Painted MDF is the budget-friendly choice and looks sharp if it’s sprayed properly. Solid wood or thermofoil resists moisture better but costs more.
- Countertop material: Quartz is the low-maintenance pick, but laminate is still the budget option at roughly half the cost. Natural stone (granite, marble) is beautiful but needs sealing every year or so.
- Sink and faucet: Undermount sinks need a solid countertop material to support them. Drop-in sinks are cheaper and more forgiving.
- Backsplash: A simple tile run is the standard. Skip it entirely and you save money but spend more time cleaning grease off the wall.
We carry a curated set of brand partners, including KraftMaid cabinetry and Cambria quartz, so you’re choosing between quality options rather than whatever the supply house has in stock this week.
What Cabinets & Countertops Costs in San Bruno, CA
The full range for cabinets plus countertops in San Bruno is $14,000 – $45,000. A small galley kitchen with stock cabinets and laminate counters sits near the bottom. A larger kitchen with semi-custom cabinetry, quartz counters, and a relocated sink lands near the top. Four things move that number:
- Kitchen size and cabinet count. Every additional linear foot of cabinetry adds cost, and a wall of uppers costs more than open shelving.
- Cabinet grade. Stock cabinets are the cheapest; semi-custom and fully custom jump up from there, sometimes doubling the cabinet line item.
- Countertop material. Laminate, quartz, and natural stone are three different price tiers. The countertop installation line alone runs $2,000 – $6,500.
- Plumbing and electrical changes. Moving a sink or adding circuits means opening walls and pulling permits, and that’s what pushes a “simple swap” into a bigger job.
- Permit scope. A straight cabinet and countertop replacement often doesn’t require a permit. Anything involving structural, plumbing, or electrical work does, and that adds inspection time and cost.
A written estimate from us breaks out cabinets, countertops, labor, demo, and disposal as separate line items. What it typically doesn’t cover: appliance hookups if you’re also replacing the range or fridge, and any hidden water damage found once cabinets come out.
See the difference
Before
After
Before
After
Before
AfterWhat San Bruno’s Fog Belt and Older Homes Do to This Work
San Bruno sits in the peninsula fog belt, and the steady onshore wind off the Pacific pushes damp air against exterior walls for months at a time. That matters for cabinet work: we routinely find moisture-swollen particleboard in cabinets set against exterior walls, and rot behind base cabinets where a slow leak went unnoticed. We check for this during the template visit, not after the new cabinets are installed.
The 2010 PG&E pipeline explosion in the Crestmoor neighborhood reshaped how construction works here. The rebuilding and mandatory seismic retrofit wave that followed means Crestmoor and the surrounding blocks now hold a mix of newer, seismically compliant homes alongside post-WWII houses from the 1940s and ’50s that still need foundation bolting and shear walling. When a kitchen job in San Bruno touches structure, we have to work within the city’s post-2010 retrofit requirements, and any digging near the old blast zone involves gas line clearance procedures that can add days to a schedule. We plan for that up front rather than discovering it mid-job.
Homeowners sometimes pair kitchen work with other projects while walls are already open, and we also handle Walk-In Showers & Shower Remodeling in San Bruno and Tub-to-Shower Conversion in San Bruno if the bathroom is next on your list. If the kitchen work is really part of something larger, our kitchen remodeling service covers the full scope, and you can see the broader Kitchen Remodeling in San Bruno page for the whole picture. We cover the entire San Bruno area, including 94066.
Serving San Bruno, CA – Our Local Coverage Area
We serve San Bruno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Cabinets & Countertops in San Bruno
Most jobs take three to five weeks from demo to final install, with the countertop template gap accounting for 7-10 days of that. Custom cabinet lines and specialty stone can push it to six weeks. Call (866) 320-2646 for a timeline based on your actual kitchen.
A straight like-for-like replacement usually does not require a permit. Anything that moves plumbing, electrical, or structural framing does, and San Bruno’s post-2010 retrofit standards mean structural changes get extra scrutiny. We pull the permits and handle the inspections; call us to confirm what your specific job needs.
Yes, in most cases. Keeping the sink and appliance locations where they are avoids opening walls and keeps the job closer to the low end of the $14,000 – $45,000 range. Moving a sink or range is doable but adds plumbing, electrical, and permit costs.
Stock cabinets with laminate countertops and a simple tile backsplash land near the $14,000 low end. Laminate counters are roughly half the cost of quartz and hold up well if you’re staying put for years. Call (866) 320-2646 for a line-item estimate so you can see where the savings actually are.
Every cabinet and countertop job we do is covered by our 730-Day Done Right Promise: if something isn’t right, we make it right, for two full years after the job. Cabinet and countertop manufacturers also carry their own product warranties on top of that, and we walk you through both at the estimate.
Get a Free Cabinet and Countertop Estimate in San Bruno
Call (866) 320-2646 to schedule a free on-site estimate for cabinets & countertops in San Bruno. We’ll measure your kitchen, talk through cabinet grade and countertop material options, and hand you a written line-item price with no surprises once work starts. If your project runs over $10,000, you can take $1,000 off, and 0% financing for 18 months is available. A live person answers around the clock.
Written by the team at Groundwork Construction Co.