Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
San Rafael is the seat of Marin County, and its housing stock tells you a lot about what a cabinetry and countertop project looks like here before anyone picks up a pry bar. The West End and the downtown grid are full of early-1900s craftsman and bungalow homes, and up in Terra Linda you’ll find mid-century ranch and split-level houses. Much of this housing predates the 1970s, which means old wiring, galvanized or cast-iron plumbing, and walls that rarely turn out square once you open them up. That matters because cabinetry and countertops live or die on the condition of the room behind them.
What Cabinets & Countertops work in San Rafael, CA actually involves
Cabinets & Countertops in San Rafael, CA is a two-stage project: you take the room down to bare, true walls, then you fit new boxes and counters to those walls. A typical cabinet-and-counter package runs $14,000 – $45,000 for the full job here, or $4,000 – $13,000 for cabinets alone and $2,000 – $6,500 for counters alone. Most single-room installs take three to six weeks from demo to final touch-up. Call (866) 320-2646 to put a real number on your kitchen with a free estimate.
How we run a cabinet and counter install, stage by stage
Every job follows a sequence, and the order protects the finish work. Here’s what ours looks like.
Stage one, site prep and demo. We pull the old boxes and counter, cap or move the plumbing and electrical the new layout demands, and check the level and plumb of the back wall. On San Rafael homes built before the ’70s, this is where surprises show up: knob-and-tube wiring, a wall that’s out a half-inch over eight feet, or a floor that dips. We shim and furr with structure rather than hiding problems behind a cabinet, because a box screwed to a bowed wall will bind its doors within a year. This stage runs one to three days, and you decide the final layout before it starts, not during.
Stage two, cabinet rough-in and install. Boxes go in level, shimmed, and secured to studs, with fillers cut to close gaps at walls and appliances set to their rough openings. You’re choosing door style and finish grade in the weeks before, but on install days the decision is layout locks. Upper and base cabinet installs usually take two to three days for a full run.
Stage three, countertop templating. For stone and quartz, the fabricator comes back to template once cabinets are set, because a template taken before install is a guess. That’s step one of the pause most homeowners underestimate: template, then cut, then a separate install visit. It adds about five to seven days. If you go laminate or butcher block, the counter is cut and fitted in one pass and you save that gap.
Stage four, counter and sink install. The tops go down, the sink and faucet go in, and the dishwasher and range get set and tested. This is one to two days. You decide your edge profile and sink type well before this so the fabricator isn’t waiting on you.
Stage five, final fit and walkthrough. Doors and drawers get adjusted, toe kicks and fillers cut clean, and we walk the room with you under the 730-Day Done Right Promise. Any hinge out of alignment gets fixed before we leave. The full sequence usually runs three to six weeks, with a custom cabinet order stretching the front end by another four to eight weeks.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
- Stock vs. semi-custom vs. full custom cabinets. Stock boxes are the cheapest and fastest to land, but they can’t solve a bowed wall without fillers and they come in set widths. Semi-custom, like the KraftMaid line we work with, sits in the middle: real wood doors, adjustable sizing, and a lead time that isn’t a full quarter. Full custom fits a difficult San Rafael bungalow best but costs the most and takes the longest.
- Quartz vs. granite vs. laminate counters. Quartz is the low-maintenance favorite, non-porous and uniform, but you pay for the templating. Granite brings real stone character with more variation and sealing requirements and, being heavy, asks more of the cabinets under it. Laminate stays the budget pick and now reads better than it did a decade ago, though heat and blade marks show.
- Frame type and finish. Framed cabinets suit an older craftsman home; frameless boxes give you a cleaner modern line and more usable interior space. Painted finishes cost less than stained hardwood and touch up more easily; stained oak or walnut hides wear differently.
- Sink and edge details. An undermount sink with a solid-surface counter is the standard pairing. Edge profile and sink choice add real cost, and both get locked in before templating.
What Cabinets & Countertops costs in San Rafael, CA
Cabinet and counter work in San Rafael runs $14,000 – $45,000 for a full kitchen package, and the spread is wider than most people expect. Here’s why.
| Line item | Range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Kitchen island installation | $3,000 – $10,000 |
Four things push a job toward the high end. First, cabinet grade and quantity: a large L-shaped run in semi-custom wood costs multiples of a small stock run. Second, material grade on the counter: quartz and granite template, cut, and install in separate visits. Third, layout changes: relocating the sink, the range, or a wall moves plumbing and electrical, and that pushes into permit territory and real labor. Fourth, the condition of what’s behind the old cabinets: an older San Rafael home with out-of-square walls or knob-and-tube wiring needs correction before boxes go up.
Our written estimates are line-item and upfront, so the number you see is the number you pay, with no change orders landing on you mid-job. What’s included is demo, cabinet and counter install, and final fit. What usually isn’t included is appliance cost, structural correction, and any relocated plumbing or electrical, which we price separately once we’ve opened the wall. That transparency is the point.
See the difference
Before
After
Before
After
Before
AfterWhat San Rafael homes specifically do to this job
San Rafael is the seat of Marin County, and the permitting review here is layered rather than simple: city review plus, in areas under older overlays or near the coast, added scrutiny that makes a kitchen job slower and more documentation-heavy than it’d be in an inland town. We pull the permits and pass the inspections so you’re working with a contractor who knows the paperwork, not guessing at it. The housing stock is the other factor. In the hillside neighborhoods above downtown and Dominican, homes sit on steep lots behind older retaining walls and cribbing, and that shows up as drainage and slope concerns that flat-lot jobs never see. In the West End and the Canal district, the older apartment stock and pre-’70s wiring mean more correction before install. Sunny, warm central Marin shelters the work from coastal fog, but the steep lots and winter runoff make a dry, level kitchen all the more worth building right the first time.
Serving San Rafael, CA – Our Local Coverage Area
We serve San Rafael and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Cabinets & Countertops in San Rafael
Most jobs run three to six weeks from demo to final walkthrough, and custom cabinets can push the front end out another four to eight weeks for delivery. The single biggest gap is counter templating, which adds about five to seven days for quartz or granite. Call (866) 320-2646 for a timeline that fits your room.
Straight cabinet and counter replacement generally doesn’t need a permit, but relocating a sink, moving the range, adding an island with new electrical, or touching a wall does. We evaluate that at the estimate and pull what’s required. Call (866) 320-2646 and we’ll tell you up front what your specific layout triggers.
Yes, keeping the sink and range where they sit is the cheapest path, and most like-for-like swaps avoid permits entirely. Moving a sink or knocking out a wall is what pushes a job from a swap into a remodel. If you’re pairing this with a deeper change, homeowners often pair it with our kitchen remodeling service.
A full package runs $14,000 – $45,000, cabinets alone $4,000 – $13,000, and counters $2,000 – $6,500. Grade, quantity, and how much prep the old walls need move that number. Call (866) 320-2646 for an exact line-item quote – estimates are free.
The workmanship is covered by our 730-Day Done Right Promise, and the cabinets and counters carry their manufacturer warranties. If something’s not done right, we make it right for two years. Call (866) 320-2646 to start with a free estimate.
Get a free Cabinets & Countertops estimate in San Rafael
If you’re pricing cabinets and counters in San Rafael, CA, start with a free on-site estimate by calling (866) 320-2646. A live person answers around the clock, we walk your room and take real measurements, and you get an upfront line-item quote under the 730-Day Done Right Promise. Whether your kitchen sits in the West End, Dominican, or the Canal, this narrow cabinet-and-counter scope is part of a full kitchen remodeling in San Rafael job we also handle, alongside walk-in showers and shower remodeling in San Rafael and tub-to-shower conversion in San Rafael for the rest of the house. We also cover San Rafael and the surrounding neighborhoods.
Written by the team at Groundwork Construction Co.