Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in San Rafael, CA: Cost, Timeline, and What’s Actually Involved
A tub-to-shower conversion in San Rafael runs $3,500 to $10,000 for most homes, and the work itself takes 5 to 10 working days once demolition starts. You’re pulling a tub, reworking the drain and valve to shower height, waterproofing the wet zone, then setting a new pan and walls. The big variable isn’t the shower – it’s what’s hiding behind the old tub surround in a house that’s been standing since the 1940s. Call (866) 320-2646 for a free on-site estimate before you commit to a number.
How a Tub-to-Shower Conversion Actually Runs, Stage by Stage
Nobody converts a tub to a shower in a day. Here’s the real sequence, and the decisions you’ll make at each stage.
Stage 1: Demo and discovery (1 – 2 days)
We pull the tub, tear out the surround, and open the wall around the valve. This is where the job reveals itself. In a West End bungalow, that wall often holds galvanized supply lines or cast-iron drain fittings that have been quietly corroding for decades. You decide here whether to re-pipe a section while the wall is open or leave it. Almost everyone re-pipes. Doing it now costs a fraction of doing it later behind finished tile.
Stage 2: Rough plumbing and valve relocation (1 – 2 days)
The shower valve moves up to shower height and the drain gets centered to the new pan. If your valve is a pressure-balance or thermostatic unit, this is when it goes in. You’ll pick the shower valve type at the estimate, not mid-job, so the rough-in matches it. If we’re relocating the drain line more than a short distance, this stage stretches by a day.
Stage 3: Inspection and waterproofing (1 – 3 days)
The rough plumbing gets inspected before anything closes up. Then we build the waterproofed pan and walls – a bonded membrane system with a pre-sloped base, not a mud bed painted with red guard. Waterproofing gets a flood test where the plan calls for one. You don’t decide anything here; this stage is ours to get right.
Stage 4: Tile, glass, and trim (2 – 4 days)
Tile set, grout, and cure time. A frameless glass panel or door goes in after grout cures (usually 24 – 48 hours). Fixtures, trim, and a niche shelf if you chose one finish out the stage. This is the longest stretch to look at, and it’s where material grade shows up most.
Stage 5: Final walkthrough and punch list (1 day)
We test the drain, check the valve, and run a punch list with you in the room. Anything on that list gets handled before final payment. The work is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make, and What Each One Really Means
Most of the money in a tub-to-shower conversion sits in four decisions. Here’s the honest version of each.
- Pan type: pre-formed acrylic vs. tiled mortar bed. A pre-formed acrylic pan installs fast and cleans up simply, but it limits your footprint and looks like a manufactured unit. A tiled mortar bed with a linear drain lets you match the floor tile and looks built-in. It costs more and takes longer to cure. For a second bathroom used by kids, acrylic makes sense. For the primary bath, tiled.
- Wall material: large-format porcelain vs. ceramic vs. a solid-surface panel. Large-format porcelain (24×48 or bigger) means fewer grout lines and a cleaner look. It’s heavier and needs a flatter substrate, which costs a bit more in prep. Ceramic is easier on the budget but shows grout more. A solid-surface panel wall (Corian-style) skips grout entirely and holds up well in a shower that gets heavy daily use – it just reads more clinical.
- Glass: framed vs. frameless. Frameless glass is the look most people want. It also costs $600 to $1,400 more than a framed unit and needs precise opening dimensions. Framed glass is the safer choice when the opening isn’t perfectly square, which happens in older homes.
- Fixtures and valve brand. A Kohler or Moen thermostatic valve is a real upgrade over a basic pressure-balance unit and will last through decades of daily showers. We install what you pick, but the trade-off is honest: budget valve, budget lifespan; premium valve, premium lifespan.
What Tub-to-Shower Conversion Costs in San Rafael, CA
For a standard tub-to-shower conversion in San Rafael, expect $3,500 to $10,000 all-in. Where you land in that range depends on five things.
- Footprint and layout. A straight swap of a 60-inch alcove tub for a 60-inch shower pan is at the low end. A shower that widens into a former closet or bumped-out wall pushes toward the high end.
- Existing condition behind the surround. Rotted studs, failing galvanized lines, or a drain that needs re-routing adds $500 to $2,000 depending on scope.
- Material grade. A standard ceramic and acrylic build sits near $3,500 to $5,500. Large-format porcelain, frameless glass, and a niche take it to $7,000 to $10,000.
- Plumbing and electrical relocation. Moving the drain, valve, or adding a niche light changes the rough-in scope and inspection requirements.
- Permit scope. A valve-and-drain change pulls a plumbing permit. A straight cosmetic swap may not. We’ll tell you which applies before you sign anything.
Every written estimate is line-item and upfront: the number you see is the number you pay. No change orders after the walls open unless you approve them in writing first. We offer $1,000 off projects over $10,000 plus 0% financing for 18 months if the scope grows into a full Bathroom Remodeling in San Rafael.
See the difference
Before
After
Before
After
Before
AfterWhat San Rafael Homes Specifically Do to This Job
San Rafael is the county seat and sits at the junction of the 101 corridor and its older settled neighborhoods – the West End, Gerard, Dominican, the Canal district – and the housing stock here is mostly pre-1970s. That matters for a tub-to-shower conversion because those houses were built with knob-and-tube or early wiring, galvanized supply lines, and cast-iron drains. In the West End and the downtown grid, we routinely open a tub wall and find the original 1940s plumbing still in service. The conversion becomes the moment to fix it.
The permitting side is its own animal. San Rafael reviews go through city building review, and properties within coastal-zone boundaries or older overlay districts get added scrutiny on documentation. A shower conversion that changes the drain location needs a plumbing permit with inspection – the kind of paperwork a licensed contractor pulls as routine. We handle the permit and the inspection pass as part of the job, not as an add-on. The flip side is that if you’re in the Canal district or a hillside property above Dominican backed into a steep lot, expect the inspector to want to see the waterproofing detail on the plan before the first inspection. That’s not a hurdle; it’s the process working correctly.
Sunny central Marin means the shower sees steady daily use without the fog belt’s extra moisture load that hits Mill Valley or Larkspur, so grout and caulk last longer here than on the coast. What the hillside lots do add is slope and drainage: a second-floor bathroom above an older retaining wall or cribbed foundation can show water intrusion into the room below if the shower pan isn’t set right. That’s not a reason to skip the conversion. It’s a reason to have a team that knows what to look for.
Serving San Rafael, CA – Our Local Coverage Area
We serve San Rafael and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Tub-to-Shower Conversion in San Rafael
Most conversions run 5 to 10 working days from demo to final walkthrough. A standard alcove swap with pre-formed pan and ceramic tile lands near 5 to 6 days. A tiled pan, large-format porcelain, and frameless glass runs closer to 9 or 10, mostly because of cure time. Call (866) 320-2646 to get a schedule range specific to your bathroom.
Yes if the valve or drain moves – which is standard for a tub-to-shower conversion. San Rafael requires a plumbing permit for any change to the drain or supply connections, and that permit gets an inspection on the rough-in. A purely cosmetic swap of a shower pan within the same footprint sometimes skips the permit. We’ll tell you which case applies to your job before the contract is signed, and we pull and pass the inspection as part of the work.
Often, yes. If the existing drain and valve land in a position that works for a shower pan, we keep the rough-in where it is and save $500 to $1,500 on plumbing scope. The exception is when the drain is off-center for a shower pan, or the valve is a wall-mount tub filler that has to move up to shower height. That relocation is a routine part of the job, not a complication – just budget for it.
Between $3,500 and $10,000 for most homes, with the low end being an acrylic pan, ceramic walls, and a straight alcove swap, and the high end being a tiled mortar bed, large-format porcelain, frameless glass, and premium fixtures. The variables that push you up: existing plumbing condition, footprint changes, and material grade. Call (866) 320-2646 for an exact quote – estimates are free.
The 730-Day Done Right Promise covers the workmanship – if it’s not done right, we make it right – one of the longest workmanship guarantees in the residential construction space. That’s not a shingle-year warranty that runs out; it’s a full two years on the labor. Our technicians have up to 12 years of experience, and every crew is background-checked and arrives in uniform. If you want your conversion done once and forgotten, this is the guarantee that matters.
Get a Free On-Site Estimate for Your Tub-to-Shower Conversion in San Rafael
We’ll walk the bathroom, measure the alcove, look behind the surround, and hand you a line-item estimate with a firm timeline and the permit scope spelled out. That visit is free, and it’s how you decide whether the number works before anyone touches a wall. Calls get answered by a live person, 24/7 – no voicemail, no waiting until Monday. Call (866) 320-2646 to schedule yours. If you’re pairing this with a wider project, our team also covers Bathroom Remodeling, roofing, and windows across San Rafael. Homeowners often pair the bathroom upgrade with Metal Roofing in San Rafael or Tile Roofing in San Rafael while the contractor is already on site – both are worth a conversation during the estimate.
Written by the team at Groundwork Construction Co.