Home additions & ADU
Kitchen remodeling
Bathroom remodeling
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Tamalpais-Homestead Valley: What the Job Really Involves
New cabinets and countertops in Tamalpais-Homestead Valley usually take 2 to 4 weeks of on-site work, and most full cabinet-and-counter projects land between $14,000 and $45,000. That number covers tear-out of the old boxes, new cabinetry, countertop fabrication and install, and the plumbing and electrical hookups that come with them. Call (866) 320-2646 and we’ll put real numbers against your kitchen instead of a range that means nothing.
How We Run a Cabinet & Countertop Project, Stage by Stage
Cabinet and countertop work is sequenced tight because the countertop can’t be templated until the boxes are set and level. Here’s the order we work in, and what you’ll be deciding along the way.
Day 1-2: Demo and site protection
We pull the old cabinets, countertop, sink, and backsplash, and protect floors and adjacent rooms. This is when hidden problems show up – water damage under a sink, out-of-square walls, or wiring that’s been buried behind panels. You’ll decide on the spot whether we repair and proceed or price an add-on, and we don’t move forward on a surprise charge without a written line item first.
Day 3-4: Layout, blocking, and rough-in
Walls get squared and blocking gets installed where the new cabinets will hang. If the layout moves the sink or range, the plumber and electrician rough in here. You’ll confirm the final layout dimensions and appliance spec sheets at this stage – the cabinets can’t be ordered correctly without them.
Day 5-7: Cabinet set and leveling
Upper and lower cabinets go in and get shimmed level and plumb, because a countertop sits on whatever the boxes give it. Doors and drawers get adjusted. You’ll walk the install and sign off on alignment before we template.
Day 8-12: Countertop template, fabrication, and install
We template the countertop once the cabinets are final, then it goes out for fabrication. Stone and quartz typically take 5 to 10 business days to come back; laminate or butcher block can be faster. You’ll pick edge profile, sink cutout, and seam placement before the slab is cut.
Day 13-16: Sink, faucet, final connections
The sink gets set, faucet and disposal connect, and we caulk and seal the countertop to the wall. You’ll do a final walkthrough here and get the warranty and care paperwork for the surfaces.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Have to Make
The spec conversation is where the budget lives. Here’s what moves the number and what each choice means in a real kitchen.
- Cabinet construction and finish: Stock boxes, semi-custom, or full custom. Semi-custom usually hits the sweet spot – you get the sizes and finishes you want without full-custom lead times. Finish matters more than people expect in a shaded Marin kitchen; a painted finish shows wear differently than a stained one.
- Cabinet hardware and drawer systems: Soft-close and full-extension drawers add cost but hold up better over years of daily use. This is where a cheaper cabinet starts to feel cheap.
- Countertop material: Quartz and natural stone sit at the top of the range, laminate and butcher block at the bottom. Quartz resists staining and doesn’t need sealing; natural stone needs periodic sealing; butcher block needs oil and doesn’t love a wet sink area.
- Edge profile and thickness: A standard eased edge keeps cost down; a thicker slab or a decorative edge adds fabrication time and money.
- Undermount vs. drop-in sink: Undermount looks cleaner and is easier to wipe, but the countertop cutout and reinforcement have to be right the first time.
What Cabinets & Countertops Cost in Tamalpais-Homestead Valley, CA
Most full cabinet and countertop jobs in Tamalpais-Homestead Valley run between $14,000 and $45,000, with a small kitchen/cabinet-only job closer to $4,000 to $13,000 and a countertop-only swap in the $2,000 to $6,500 range. A backsplash or island added to the scope gets priced as a line item, and we’ll show you each one. Here’s what pushes a project toward the low or high end:
- Kitchen size and cabinet count: A galley with 12 linear feet of cabinets costs a fraction of an L-shaped kitchen with an island and 25-plus feet of boxes.
- Whether the layout moves: Keeping the sink, range, and fridge where they are avoids plumbing and electrical rework. Relocating them is the single biggest driver of add-on cost.
- Cabinet grade and finish: Semi-custom vs. stock vs. custom, and finishes that need more labor to apply.
- Countertop material and slab size: Quartz and stone cost more per square foot than laminate, and unusual slab sizes or multiple seams drive fabrication time.
- Existing condition: Out-of-square walls, water damage, or old wiring behind the cabinets add repair time and materials.
Written estimates list cabinets, countertop fabrication and install, sink and faucet set, and finish carpentry. What’s not always included: appliance costs, backsplash tile and labor if you add it, and structural or electrical repairs found after demo. We flag those in writing before we do the work, and the number on the estimate is the number you pay on the agreed scope.
See the difference
Before
After
Before
After
Before
AfterWhat Tamalpais-Homestead Valley Homes Do to This Job
Tamalpais-Homestead Valley is an unincorporated Marin County community, which means permits go through the County of Marin, not a city building department. That matters for a cabinet and countertop job because anything that moves plumbing or electrical – a sink relocation, a new range circuit, a dishwasher swap – gets pulled and inspected, and County scheduling adds days to the calendar that a stock cabinet swap in a city would skip. On the narrow, winding private lanes off the valley floor, truck access and staging matter too; a full cabinet delivery and a stone slab need room to unload, and we plan deliveries around that.
The housing stock is mostly mid-century redwood-and-glass hillside homes, older cottages, and 1950s-70s post-and-beam houses, so we’re often working around out-of-square walls and cabinets that were built in place decades ago. On the shaded north-facing slopes under the redwoods, damp conditions mean we check under-sink cabinets and wall backing for rot and moisture damage before we install new boxes. Parts of this work connect to a wider scope when you’re moving walls or adding square footage; that’s part of a full Kitchen Remodeling in Tamalpais-Homestead Valley and we scope it that way. Homeowners often pair a new vanity or shower with a kitchen refresh, and that’s where our Walk-In Showers & Shower Remodeling in Tamalpais-Homestead Valley and Tub-to-Shower Conversion in Tamalpais-Homestead Valley work comes in on the same visit, so you’re not scheduling another crew. Our Kitchen Remodeling team keeps the cabinet and countertop scope in focus, and we cover the whole of Tamalpais-Homestead Valley, including the slopes above the valley and the lanes near the 94941 ZIP boundary.
Serving Tamalpais-Homestead Valley, CA – Our Local Coverage Area
We serve Tamalpais-Homestead Valley and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Cabinets & Countertops in Tamalpais-Homestead Valley
Plan on 2 to 4 weeks on site for a full cabinet and countertop project, plus lead time on cabinets and a week or two for stone fabrication. County of Marin permitting, if you’re moving plumbing or electrical, adds days to the front end. Call (866) 320-2646 for a schedule that fits your dates.
Cabinet and countertop swaps that stay in place generally don’t require a permit, but relocating a sink, adding a range circuit, or moving electrical does. In unincorporated Tamalpais-Homestead Valley those go through the County of Marin. We tell you which part of your scope needs pulling and handle it in writing.
Yes, and it’s the most common way we do it – keep the sink, range, and fridge where they are and the job stays in the $14,000 to $45,000 range without plumbing or framing surprises. Moving the layout is where the cost climbs. Call (866) 320-2646 and we’ll price both layouts so you can see the difference.
A countertop-only install in Tamalpais-Homestead Valley typically runs $2,000 to $6,500, depending on material and slab size. Cabinet-only work runs $4,000 to $13,000. Call (866) 320-2646 for an exact quote – estimates are free.
Every cabinet and countertop project we install is backed by our 730-Day Done Right Promise – if it isn’t done right, we make it right. Manufacturer warranties on cabinets and surfaces also apply, and we hand you that paperwork at the final walkthrough.
Get a Real Number on Your Cabinet & Countertop Job
If you’re planning cabinets and countertops in Tamalpais-Homestead Valley, the free estimate is the place to start. We come out, measure, look at what’s behind the old cabinets, and hand you a written line-item quote covering cabinets, countertop, labor, and the plumbing and electrical hookups – no vague allowances. Call (866) 320-2646 and a live person answers, day or night.
Written by the team at Groundwork Construction Co.