Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in San Rafael, CA: What It Costs and How It’s Built
A chain link fence in San Rafael typically runs $3,500 to $9,000 installed, and most residential jobs are wrapped up in two to four working days once we’ve pulled the permit and marked the line. Below $3,500 you’re usually looking at a short run or a repair; above $9,000 you’re usually looking at a tall commercial-grade enclosure, a lot of slope, or a line that needs real site work first. Call (866) 320-2646 and we’ll walk your property, measure the run, and hand you a written line-item number.
How the Job Actually Moves, Stage by Stage
Chain link has a rhythm. The steel is fast. The permitting and the dirt are not. Here’s what our crews actually do, in order, so you know what each day looks like and what we need you to decide.
- Stage 1 – Site walk and layout (day 1, 1 to 3 hours). We walk the property line with you, check for the easement and the property pins, flag utility locates, and confirm corner and gate positions. This is your call on the one that matters most: where the gate goes. That decision changes the whole line, so make it here, not later.
- Stage 2 – Permit and presite (3 to 10 business days). We submit to the City of San Rafael for a fence permit and, where a line sits in a front setback or a neighborhood with design review, we handle the added documentation. In older overlays this step can stretch; we build that into the schedule up front rather than quiet on you mid-job.
- Stage 3 – Demolition and prep (day 1 of the install, 2 to 4 hours). Old fencing comes out, posts and concrete footings are cut and hauled off, and we clear roots and debris from the line. If the site has a retaining wall or a slope that needs shoring, this is where that shows up, and you’ll get a change order before we move a hand of it.
- Stage 4 – Posts, rails, and mesh (bulk of the install, 1 to 3 days). We set posts to depth in concrete footings, let them cure, then run top rail, tension bars, and mesh line to line. On hillside lots we step the fence and use swaged rail where a straight run won’t hold grade. This is where a chain link job either looks tight for twenty years or sags in two.
- Stage 5 – Gates, hardware, and final walk (day 3 to 4, 2 hours). We hang gates, set latches and hinges, tension the mesh, and walk the line with you. You approve the work, and the 730-Day Done Right Promise is written on it from day one. If a post settles or a gate drops, we’re back out, no argument.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What You’re Choosing Between on a Chain Link Fence
Chain link is a family of specs, not one product. Here’s the honest trade-off of each choice, so you can pick what fits your lot and your budget.
- Galvanized steel is the workhorse: plain silver, holds up in San Rafael’s dry summers, runs $3,500 to $6,000 for a typical residential run. Rust shows faster near the bay, at the base and on cut ends.
- Vinyl-coated steel adds a bonded colored jacket, black, green, or brown, runs $4,500 to $9,000. It hides rust, looks cleaner against a house, and lasts longer. Worth it if the fence shows from the street.
- Gauge is the number most people skip. An 11-gauge mesh and post is heavier and more rigid than the 12.5-gauge you’ll see in the cheapest quotes. On a windy hill above Dominican, go heavier.
- Post and top-rail size matters as much as gauge. A 2-inch post with a heavier rail holds up in a high-wind exposure far better than a 1-5/8-inch set.
- Height and gates drive the number more than anything. Standard is 4 to 6 feet. Add a walk gate and a double drive gate and you’ll spend $600 to $1,500 more on hardware alone.
What a Chain Link Fence Costs in San Rafael, CA
For a residential chain link fence in San Rafael the overall range is $3,500 to $9,000. Where a job lands in that range depends on five things:
- Linear footage. Most homes sit between 100 and 250 linear feet. That one number moves the price more than any other.
- Condition of the site. A flat, clear lot is easy. Roots, an old concrete wall, or a slope needing shoring adds days and dollars.
- Slope. Hillside lines above downtown need stepping, swaged rail, and sometimes engineering input, all of which push toward the top end.
- Material grade. Vinyl-coated, heavy-gauge, or taller stock costs more per foot than standard galvanized.
- Permit scope. A plain rear-yard fence permits fast. A front-line or a taller enclosure in a design-review neighborhood takes more paperwork and more time.
A written estimate from us is line-itemed: footage, posts, rail, mesh, gates, hardware, footings, demo, haul-off, permit, and the labor to set it all. What it doesn’t cover is landscape restoration, sod, and any work a structural engineer signs off on for a slope or a retaining wall. We’ll flag those clearly so nothing shows up as a surprise. That’s the upfront pricing commitment; the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat San Rafael Lots Do to a Chain Link Fence
San Rafael is the seat of Marin County, sitting where the 101 corridor meets some of the older, settled neighborhoods in the county, and that shows up in the work. The West End and downtown grid are full of early-1900s craftsman and bungalow homes on tight lots where a property line runs close to a house and an existing footing. The Canal district has a dense concentration of older apartments where fence lines run between parking and shared access. Above downtown and Dominican, homes sit on steep lots behind older retaining walls and cribbing, and this is where chain link jobs get interesting: a fence line that follows a slope can uncover drainage and stability problems flat-lot jobs across the county never touch, and sometimes that means a structural engineer gets involved before we set a post. The city’s permitting regimes are layered, and older homes in the coastal zone or in overlay areas carry added scrutiny. Our technicians have up to 12 years of experience reading these sites, and they know which jobs go fast and which need the paperwork first.
Serving San Rafael, CA – Our Local Coverage Area
We serve San Rafael and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in San Rafael
Most residential chain link fences in San Rafael take two to four working days on site, plus the permit wait, which runs three to ten business days. The install itself moves fast once posts are set; the curing and the permit are what stretch the timeline. Call (866) 320-2646 for a firm date.
Yes, the City of San Rafael requires a fence permit for most installations, and front-yard or taller fences get extra review in older overlays. We pull the permit for you and handle the documentation. Call (866) 320-2646 and we’ll confirm what your exact line needs.
No, not without your sign-off. If we hit rock, a hidden wall, or a slope problem, we stop and write a change order with a number before we go further. The estimate you sign is the price you pay on the scope we agreed. Call (866) 320-2646 for a written line-item estimate.
Residential chain link fence installation in San Rafael runs $3,500 to $9,000, with most homes landing between $4,500 and $7,000. Footage, slope, gauge, and gate count move the number. Call (866) 320-2646 and estimates are free.
Every chain link fence we install in San Rafael is covered by the 730-Day Done Right Promise. If a post settles or a gate drops in that window, we come back and make it right, no fine print. Call (866) 320-2646 to schedule your free on-site estimate.
Homeowners here often pair a new fence line with a hardscape upgrade, so if the driveway or front walk is part of the plan, our Concrete Driveways & Concrete Work in San Rafael and Asphalt Driveways & Resurfacing in San Rafael teams can handle it in one visit. If you’re planning a larger yard buildout, a chain link line is often the first piece of a full Fence Installation in San Rafael, and you can see the wider scope on our Fence Installation service hub. We cover all of San Rafael, including 94901 and 94915.
Get Your Chain Link Fence Estimate
Call (866) 320-2646 for a free on-site estimate on your chain link fence in San Rafael. A live person answers 24/7, no voicemail, no waiting until Monday. We’ll walk your line, measure the run, flag the slope or permit wrinkles, and hand you a written line-item price the same visit. From quote to final walk, it’s built to last and backed in writing.
Written by the team at Groundwork Construction Co.