Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in San Francisco: What It Takes and What It Costs
Door Installation in San Francisco runs $945 to $5,900 for a full replacement with the frame rebuilt and hardware swapped, and most single doors are finished in two to five days once the permit is signed off. The price climbs when the wall has to be opened, the header rebuilt, or the door is a custom size cut for a Victorian opening that isn’t square. Call (866) 320-2646 for a free on-site estimate and a written line-item quote before anything gets ordered.
Key Takeaways
- Standard door swaps land in the $945 – $5,900 range; structural or custom work pushes higher.
- Salt air and fog shorten the life of hinges, strike plates and fasteners, so we spec stainless and galvanized hardware here.
- Permits are pulled where the work touches structure or egress; we handle that filing for you.
- A written quote, upfront pricing and our 730-Day Done Right Promise on the workmanship.
How We Run a Door Installation in San Francisco, Stage by Stage
The list below is the actual order of operations, with the homeowner decisions flagged so you know what needs an answer and when.
Stage 1: On-site measure and condition survey (day 1, 1 – 2 hours)
We pull the trim, check the opening for plumb and square, and look at what’s behind the casing. In San Francisco’s older wood-frame row houses the rough opening is often out by half an inch or more, and the sill is usually where the rot hides. You decide the door style, the swing direction and whether to keep or replace the existing frame; we tell you what the frame condition actually allows.
Stage 2: Written quote, material selection and permit filing (3 – 10 days)
You get a line-item estimate showing door, frame, hardware, labor and permit separately. If the work touches structure or a required egress path, we file the permit and pull the inspection schedule. This is the stage where most delays live, so we start it before the door is ordered. You choose the door, the finish and the hardware package here, and confirm the schedule.
Stage 3: Order and lead time (2 – 6 weeks depending on spec)
Stock doors arrive fast. Custom sizes, prefinished slabs and impact-rated units take longer. We confirm the delivery window in writing so nobody is guessing when the crew shows up.
Stage 4: Demo, framing and install (1 – 3 days)
We set dust control, remove the old door and frame, repair any rot in the sill or jack studs, and dry-fit the new unit. Shimming, securing to the framing, sealing and flashing all happen before the first piece of trim goes back on. If the opening needs a new header, that adds a day and usually a framing inspection.
Stage 5: Trim, hardware, weatherseal and final walkthrough (day 3 – 5)
We hang the door, set the strike plate and lockset, weatherstrip the perimeter, caulk and paint the casing edge, and hand it over with the operation checked. You walk the door through with us, open and close it yourself, and we sign off together. Any adjustment during the 730-Day Done Right Promise window is ours to handle.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
There’s no single right door for a San Francisco house. Here’s what the decision actually comes down to, with the honest trade-off on each.
- Material: Wood gives the most authentic look for a Victorian or Edwardian front, but it needs repainting every 3 – 5 years near the coast. Fiberglass holds paint longer and resists rot, at a slightly higher price. Steel is the cheapest and dents easily; it suits interior and utility doors better than an exposed exterior face.
- Frame type: Replacing the frame (full replacement) costs more but fixes square and rot problems in one move. A slab swap into the existing frame is cheaper and faster, but only works if the frame is sound and square.
- Hardware: In the fog belt we spec stainless or galvanized hinges, strike plates and fasteners by default. Standard zinc-plated hardware is what corrodes first and what makes a door stick and sag within a few years. This is the single biggest quality decision on a coastal job.
- Lockset and security: A deadbolt with a reinforced strike is standard on any exterior door. Grade-1 hardware costs more up front and holds up far better to salt air and repeated use.
- Impact and exterior rating: Doors on the ocean-facing west side can be spec’d with impact-rated glass and a marine-grade finish; it’s a real cost jump but it stops the rot-and-repaint cycle.
- Brands we regularly specify: Sterling and Grohe hardware where the door set includes a matching fixture package, and GAF or CertainTeed flashing systems on the exterior joints. These are the parts that decide how long the door lasts, not the trim color.
What Door Installation Costs in San Francisco, CA
Most single-door installations here fall between $945 and $5,900. The number depends on five things: the size and type of door, whether the existing frame and wall condition is sound, whether structural framing or a new header is needed, the grade of hardware and finish, and the permit scope.
| Job | Typical range |
|---|---|
| Standard interior door swap | $945 – $2,360 |
| Exterior entry door with new frame | $2,360 – $5,900 |
| Structural header or egress work | Add $1,500 – $4,000 |
| Custom-size or marine-grade finish | Add $1,000 – $3,000 |
Every written estimate we produce is line-item: door, frame, hardware, labor, permit and disposal each shown separately. Upfront pricing means the number on the quote is the number you pay, with no change orders for surprises the survey should have caught. What isn’t included in a base quote is anything the opening reveals mid-job (hidden rot, a rotted sill, a missing header) and any cosmetic finishes you choose to add. Financing is 0% for 18 months, and projects over $10,000 take $1,000 off, which helps when a full set of Victorian doors is being replaced at once.
See the difference
Before
After
Before
After
Before
AfterWhat San Francisco Homes Specifically Do to This Job
Door Installation in San Francisco is fought against salt air and fog before anything else. On the west-side hills, from the Inner Sunset out to the Outer Sunset and across to the Richmond, the marine layer keeps timber and metal damp most of the year, and standard zinc-plated hinges and fasteners corrode within a fraction of their inland lifespan. Chances are high that the door you’re replacing started sticking not because it was installed wrong but because the hinges swelled with rust and the sill went soft. That’s why we spec stainless hardware, galvanized flashing and marine-grade finishes even on a modest job.
The housing stock adds its own problems. Much of what we work on is pre-1906 Victorian and Edwardian wood-frame row houses with brick foundations, plus the 1950s – 70s stucco-over-wood buildings that line so many blocks. Rough openings in those houses are rarely square, the exterior casings are often nailed into framing that’s seen a century of movement, and the sill sits right where the fog does its work. Structural work also has to respect soft-story seismic mandates, and neighborhood design review can slow down exterior changes on historic streets before a single door is ordered. If the door is part of a full Windows & Doors in San Francisco scope, we’d plan the whole envelope together rather than one unit at a time, and you can review our wider Windows & Doors service for how that works.
On the permitting side, an interior door replacement rarely needs a permit, but any exterior door change that touches structure, egress or a historic façade does. We file that locally and pass inspection, which in San Francisco means matching the approved drawing instead of hoping the inspector is in a generous mood. We cover the whole San Francisco area, and homeowners also work in Chain Link Fence in San Francisco or a Vinyl Fence in San Francisco on the same property if the yard project is moving along too.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Door Installation in San Francisco
A Door Installation in San Francisco usually takes two to five days from start to finish, with one to three days of actual labor and the rest taken up by order lead time and permit review. Custom doors and structural openings can stretch that to two weeks. Call (866) 320-2646 to get a firm schedule for your door.
Interior door replacements generally don’t need a permit, but an exterior door that changes the opening, affects egress, or alters a historic façade does. We tell you on the first visit which side of that line your job falls, and we file the permit and handle inspection if it’s required. Call (866) 320-2646 for a quick yes-or-no on your address.
In most cases yes, and we always try the least invasive route first. If the door sits in a wall that needs a new header or a widened opening, that’s a structural change and we’ll say so up front with the added cost. The on-site survey is where we tell the difference.
Most jobs land between $945 and $5,900 for a single door, with standard interior swaps at the low end and exterior entry doors with new frames near the top. Structural or custom work adds $1,000 – $4,000 on top. Call (866) 320-2646 for an exact quote; estimates are free.
Every door we install is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in the residential space: if it’s not done right, we make it right. The door and hardware carry the manufacturer’s warranty on top, and we hand you the paperwork at the walkthrough. Call (866) 320-2646 to schedule your free estimate.
Get a Free Door Installation Estimate in San Francisco
Call (866) 320-2646 to schedule a free on-site estimate for Door Installation in San Francisco. A live person answers around the clock, and the visit is a measure, a condition survey and a written line-item quote with no pressure to sign. You’ll know the dollar figure and the schedule before you commit to anything.
Written by the team at Groundwork Construction Co..