A Groundwork company - serving San Francisco, CA

How Are Custom Windows Made? (San Francisco, CA)

Windows & doorsWindows & doors
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

How Are Custom Windows Made? A San Francisco Homeowner’s Guide

Custom windows are made by measuring each opening in the field, then building a window to those exact dimensions: frames are milled or extruded to a profile that matches your house, glass is cut and sealed into an insulated unit, hardware is attached to the specified grade, and the finished assembly is shipped to the job as a single built-to-order product. In San Francisco, where nearly every Victorian and Edwardian row house has a non-standard opening size, a historic profile requirement, and a fog-belt environment that corrodes standard materials, that custom process is less a luxury than the practical default. For a free consultation on your project, call (866) 320-2646.

Key Takeaways

  • Custom windows are built to actual field measurements, not nominal sizes, which eliminates the shimming and gap-filling that cause future air and moisture infiltration.
  • Coastal and high-humidity finish standards from brands like Andersen and Marvin exist specifically for environments like San Francisco’s fog belt.
  • For street-facing windows in San Francisco historic districts, custom manufacturing is the only path to matching the original pane configuration and sash profile without a variance.
  • Typical window replacement in San Francisco runs $5,310-$17,700, depending on size, glazing, and hardware grade.

What Actually Happens Between Your Measurement and Your Window

The process starts with a field measurement, not a tape measure against the opening from inside the room. A proper measurement captures the rough opening’s width, height, depth, and squareness at multiple points, because in a 120-year-old San Francisco Victorian those numbers almost never match on all four sides. The opening may be out of square by a half inch or more, and the existing frame may have settled in ways the original builder never anticipated. Those measurements get transferred to a factory order: frame dimensions, sill height, jamb depth, sash weight, glazing type, and finish color all specified to the tenth of an inch.

From there, the frame profile is either extruded (for vinyl and aluminum) or milled from wood or a wood-composite (for traditional and clad products). The profile isn’t just shape - it’s the shoulder depth, the weatherstripping channel, the weep system, and the exterior trim return. On a San Francisco project, that profile is often the whole ballgame, because a street-facing window in a historic district needs to reproduce a specific sash profile that the neighboring buildings also share.

Why the Glazing Seal and Hardware Grade Matter in the Fog Belt

An insulated glass unit is a sealed assembly: two panes, a desiccant-filled spacer, and a perimeter sealant that must hold for decades. Seals fail when they’re exposed to repeated thermal cycling and moisture, which is exactly what a San Francisco west-side home sees. Marine fog rolls in most summer afternoons, temperatures swing mildly but constantly, and salt air corrodes anything that isn’t rated for it. The quality of the perimeter seal and the gas fill is where cheap windows and quality windows diverge most sharply over a 20- to 25-year horizon.

Hardware matters equally. Contractors on the west side of the city learn to spec stainless steel hinges, handles, and locking mechanisms on exterior assemblies even when the budget is tight, because standard zinc-plated fasteners pit and seize within a fraction of the normal lifespan. Andersen and Marvin both publish coastal and high-humidity finish standards that commodity manufacturers don’t offer: specific coating systems, stainless hardware grades, and warranty language that anticipates salt exposure. That difference is why the brand panel on a custom order matters more than the sticker price.

Custom vs. Standard-Size: Why the Difference Shows Up Years Later

A standard-size window is built to nominal dimensions (say, 36 by 60 inches) and then installed into a rough opening that may be 36½ inches on one side and 35⅞ on the other. To make it fit, the installer shims, foams, and fills. That fill is where future infiltration begins: foam shrinks, caulk cracks, and moisture finds the seams. In a San Francisco home with a fog-exposed west wall, that pattern shows up as paint failure around the frame within a few years, then as soft trim or sill rot.

Custom units are built to the actual field dimensions, which means the window fits the opening rather than being filled to fit. That’s the practical argument for custom, and it’s why we see fewer callbacks on custom installs than on retrofit jobs using nominal sizes. Custom manufacturing also lets you match the pane configuration and sash profile of the original unit - the only way to satisfy San Francisco planning code for street-facing windows in historic districts without going through a variance process that can add months to a project.

Project Type Typical San Francisco Cost Range
Standard window replacement $5,310-$17,700
Impact window installation $9,440-$29,500

What Groundwork Construction Co. of San Francisco Brings to the Order

We work from a curated set of window and door brands - Andersen and Marvin among them - rather than whatever the local supply house happens to have on the floor this month. That matters when a window needs to perform for 25 years in the fog belt. A brand with a documented coastal finish standard and a stainless hardware grade is a different product from a commodity window that happened to be in stock. You can see the full range of options on our Windows & Doors page.

Our technicians have up to 12 years of experience measuring, ordering, and installing custom windows in San Francisco housing stock, from soft-story retrofits on hillside lots to straightforward single-window swaps in 1920s Edwardians. Every project is covered by the 730-Day Done Right Promise. Calls are answered by a live person 24/7, and new projects get a free estimate and design consultation, with 0% financing for 18 months available and $1,000 off any project over $10,000.

If you’re weighing a window project against other improvements this year, it may help to see how the numbers compare across trades. A San Francisco service area overview covers the full range of work we handle.

FAQs

Need Construction help in San Francisco? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch