A Groundwork company - serving San Francisco, CA

Iron Fence in San Francisco, CA

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

Iron Fence in San Francisco, CA

Iron fencing in San Francisco typically runs $3,200 to $9,500 for a finished residential run, and most of that spread comes down to height, style, and how the posts are set into our hillside soil. A wrought iron or ornamental steel fence is the right call when you want a property line you can see through, a gate that actually latches square after years of use, and a barrier that holds up against salt air and the fog that rolls through the Sunset and Richmond districts most mornings. We install iron fences across San Francisco, and we do it as part of a full-scope exterior package – which means the same crew coordinating your fence also knows how it ties into gates, retaining walls, and hardscape. Call (866) 320-2646 and a live person picks up, day or night.

This page covers the iron fence side of our work specifically. For the broader picture, including wood, vinyl, and chain link, see our Fence Installation in San Francisco page and the main Fence Installation hub.

Key Takeaways

  • Most residential iron fence runs in San Francisco land between $3,200 and $9,500, with gates adding $600 to $2,400 each.
  • Iron and ornamental steel hold up to Bay Area fog far better than wood, but they need powder-coating or a rust-inhibiting finish to survive near the coast.
  • San Francisco’s permit rules for fencing on or near property lines are tighter than most of the surrounding counties – plan for plan review on anything over 6 feet or fronting the street.
  • Every iron fence we install is covered by the 730-Day Done Right Promise, and the pricing we quote upfront is the pricing you pay.

When You Need Iron Fence

Iron fencing isn’t the cheapest option per linear foot, and it isn’t right for every property. But in San Francisco there are a handful of situations where it’s clearly the correct choice, and they come up again and again in our work.

  • You live on a slope and wood won’t stay plumb. In neighborhoods like Noe Valley, Bernal Heights, and Glen Park, grade changes of 6 to 12 feet across a lot are common. Wood posts rack and lean on that kind of grade within a few seasons. Iron posts set into concrete footings hold their line because the panel is welded, not nailed – it flexes as a unit rather than loosening joint by joint.
  • You’re on a corner or a visible street frontage. A corner lot in the Inner Sunset or Outer Richmond puts your fence on display from two directions. Iron gives you a defined property edge without blocking sightlines, which matters for both curb appeal and pedestrian safety where there’s no setback.
  • You need security without a solid wall. A tall wooden or masonry fence reads as a barrier and can feel closed-in on a narrow lot. Iron at 6 feet or 7 feet with spear finials gives you a real security boundary while keeping light and air moving across the property.
  • You want a gate that works. Driveway gates and pedestrian gates in San Francisco take a beating – sloped driveways, tight swing clearances, constant use. A welded iron gate with proper hinges and a self-closing mechanism will still swing true a decade in. Wood gates sag.
  • Your existing iron fence has rusted through at the base. We see this constantly on fences in the Sunset, Richmond, and anywhere within a mile of the ocean. Salt-laden air attacks the bottom 12 inches of the pickets first, and once rust-through starts at the weld, patching doesn’t hold. Replacement is usually the honest answer.
  • You’re installing a pool or spa and need a code-compliant barrier. California pool safety rules require a barrier that resists climbing and self-closes at the gate. Iron meets those requirements cleanly and looks better than most alternatives. Our technicians have up to 12 years of experience with pool barriers and know exactly what passes inspection.

Our Iron Fence Process

An iron fence is only as good as what’s underground. That’s the part most homeowners never see and the part that determines whether your fence is still straight in 15 years. Here’s how we run an iron fence project from first call to final walkthrough.

  1. On-site measure and site walk. We come out, measure the actual run, and check what’s below grade – existing footings, irrigation, sewer laterals, and the grade changes that determine post spacing. On San Francisco hillside lots this step is where projects get saved from ugly surprises. We give you upfront pricing at or near this visit, and the number we quote is the number you pay.
  2. Permit and property line review. San Francisco requires a permit for fences over 6 feet in most zones, and there are height limits for front-yard fences that vary by district. If your fence sits on a property line, we confirm the line before we dig – a surveyor may be needed, and we’ll tell you straight if it is. We handle the permit paperwork. You don’t have to chase the city.
  3. Footings set to frost and grade. We set posts in concrete footings sized to the fence height and soil conditions – deeper and wider than a wood fence would need because iron panels are heavier and rigid, so the load path goes straight into the footing. Post holes get inspected before concrete goes in on permitted jobs.
  4. Panel fabrication and fitting. Panels are fabricated to measured lengths and set level and square. Welds are ground clean, and every cut end and weld gets a rust-inhibiting primer before finish coat. This is the step that separates a fence that lasts from one that rusts from the inside out in three years.
  5. Finish coat – and this matters on the coast. For anything within a couple of miles of the ocean, we recommend powder-coating or a quality exterior-grade finish over primer. Salt air and fog will find any bare steel. On interior neighborhoods like Mission or Potrero Hill, a good primer-plus-paint system holds up well. We’ll tell you which finish makes sense for your specific block, not a generic answer.
  6. Gate install, hardware, and final walkthrough. Gates get set with proper hinges, a positive latch, and self-closing hardware where code requires it. We walk the full run with you, check every panel and gate, and hand off warranty documentation. Your workmanship is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right.

Every technician who shows up is background-checked and in uniform. No unmarked vans, no mystery crews.

Iron Fence Pricing in San Francisco

Iron fence pricing in San Francisco runs higher than most of the country, and it’s worth understanding why before you compare bids. Labor costs here are among the highest in California. Hillside lots require more footing work. Coastal exposure demands better finishes. And property line and permit review adds time that doesn’t show up on a fence panel. Here are honest ranges for what a finished residential iron fence costs in San Francisco.

Item Typical Range (San Francisco) What Affects It
Ornamental steel fence, 4 ft, per linear foot $55 – $95 Panel style, picket spacing, finish system
Ornamental steel fence, 6 ft, per linear foot $75 – $130 Height, footing depth, coastal finish upgrade
Wrought iron, custom fabricated, per linear foot $120 – $220 Custom design, hand-forged details, powder-coat
Pedestrian gate (installed, with hardware) $600 – $1,400 Width, self-closing hardware, latch type
Driveway gate (installed) $1,400 – $2,400+ Span, swing vs. slide, automation prep
Footing work on steep grade $400 – $1,800 added Grade change, soil, retaining integration
Coastal rust-inhibiting finish upgrade $300 – $900 Proximity to ocean, fence length
Permit and plan review $200 – $700 Height, location, district rules

Those ranges assume a typical residential run of 40 to 120 linear feet. A short 30-foot fence along a Noe Valley side yard will land near the low end; a full perimeter with a driveway gate and coastal finish on a Bernal Heights corner lot will push past the high end.

What drives the number most: total linear feet, fence height (6-foot and 7-foot runs are the majority of what we install, and every additional foot adds material and footing depth), style (simple picket panels vs. custom fabrication), grade change, gate count, and finish system. The single biggest cost variable in San Francisco is footing work on sloped lots – and it’s also the variable most likely to get glossed over in a competing bid, only to show up later as a change order. We won’t do that to you. Upfront pricing, no surprises.

On budget: projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months is available on approved credit. A full perimeter iron fence with a gate often crosses that threshold. That makes a fence project financially manageable without stretching a savings account.

Call (866) 320-2646 for a free project estimate and design consult. We’ll walk the property, talk through styles and finishes, and give you a real number. Estimates are free and there’s no obligation.

FAQs – Iron Fence

How much does an iron fence cost in San Francisco?

Iron fence installation in San Francisco typically costs $3,200 to $9,500 for a finished residential run, which works out to roughly $55 to $130 per linear foot for standard ornamental steel and $120 to $220 per foot for custom wrought iron. Gates add $600 to $2,400 each. The biggest cost drivers are height, grade, finish system, and permit requirements – all of which vary block to block in this city. Call (866) 320-2646 for an exact quote; estimates are free.

Do I need a permit to install an iron fence in San Francisco?

Yes, in most cases. San Francisco requires a building permit for fences over 6 feet in height in most zoning districts, and front-yard fences have their own height limits that vary by neighborhood. Any fence on or near a property line also gets scrutiny. Our team handles the permit paperwork for you, and we’ll tell you upfront if a surveyor is needed to confirm your property line before we dig.

How long does an iron fence last in San Francisco?

A properly installed, properly finished iron fence lasts 20 to 40 years in San Francisco, even close to the coast. The single biggest factor is the finish system – bare steel or thin paint near the ocean rusts through fast, while a powder-coated or rust-inhibited finish holds up for decades. The second factor is footing quality. A fence with posts set deep into concrete stays plumb; one with shallow footings doesn’t. Our technicians have up to 12 years of experience installing iron on coastal and hillside lots, and every job is covered by the 730-Day Done Right Promise.

Is iron fencing cheaper to repair or replace?

Replace, in most cases. Iron fence repair only makes economic sense when the damage is isolated – one bent panel, a single rusted picket, a gate that needs new hinges. Once rust-through has started inside the welds or more than a couple of panels are compromised, patching tends to fail within a season or two and you’ll pay twice. On a San Francisco fence that’s been sitting near the coast for a decade or more, replacement with a proper finish system is usually the honest answer. Call (866) 320-2646 and we’ll give you a straight assessment – we won’t sell you a replacement you don’t need.

Can you install an iron fence on a sloped yard?

Yes, and this is one of the most common reasons homeowners in San Francisco choose iron over wood. Sloped lots in Bernal Heights, Noe Valley, and Glen Park cause wood fences to rack and lean as posts shift independently. Iron panels are welded units that flex as a whole, so they hold their line across grade changes. We set staggered footings sized to the grade and pack concrete to spec on every post, and we’ll walk the slope with you during the estimate so you understand exactly how the finished fence will step down the hill.

How quickly can you install an iron fence in San Francisco?

Most residential iron fence runs are completed within two to four weeks of the estimate, allowing for fabrication time and permit review. Simpler ornamental steel installations can move faster; custom wrought iron takes longer. On-site installation itself is typically one to three days once panels arrive. Call (866) 320-2646 to get on the schedule – a live person answers around the clock.

If your property is under a homeowner’s association or historic district overlay, review requirements can add a few weeks to the timeline. We’ll flag that during the estimate so there are no surprises.

Iron fence is one of the exterior upgrades that holds up well in this climate and adds real definition to a San Francisco property line. Whether you’re replacing a rusted-out fence in the Sunset, adding a security barrier on a Bernal Heights slope, or installing a pool barrier for a new spa, we’ll give you an honest number, a straight process, and workmanship backed in writing. Background-checked, uniformed technicians on every job. Upfront pricing, no surprises. Live person, 24/7. Call (866) 320-2646 for a free project estimate and design consult – we’ll walk the property with you and tell you exactly what your iron fence will cost.

Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco.

Need Construction help in San Francisco? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch