Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
See the difference
Before
After
Before
After
Before
AfterPrivacy Fence in San Francisco, CA
A privacy fence in San Francisco typically runs $3,200 to $9,500 for a standard city lot, and most residential installs finish in two to four days depending on access and materials. If you’re hemmed in by a neighbor’s second-story window, tired of street noise carrying up the hill, or just want your backyard to feel like yours again, we build fences that block sightlines, hold up to fog and wind, and don’t need a redo in three years.
Groundwork Construction Co. of San Francisco handles privacy fence work as part of our full Fence Installation service, which means we treat a fence like the structure it is: footings, plumb posts, proper setbacks, and hardware that survives a wet winter. We’ve been in business since 2014, our technicians bring up to 12 years of experience, and every install is covered by our 730-Day Done Right Promise. If it’s not done right, we make it right.
Call (866) 320-2646 and a live person will pick up, any hour, any day. No voicemail, no waiting until Monday.
Key Takeaways
- Most San Francisco privacy fence projects land between $3,200 and $9,500, with materials and slope driving the range.
- Permits are frequently required, and fence height limits vary by neighborhood and zoning district.
- We build in cedar, redwood, composite, and vinyl, plus pressure-treated pine for budget-conscious projects.
- Every job carries the 730-Day Done Right Promise, and estimates are free.
When You Need a Privacy Fence
Most homeowners call us after putting up with the same problem for a season or two. These are the situations we hear about most in San Francisco:
- A new neighbor added a second-story addition. In Sunset and Richmond District homes, a rear addition next door can suddenly give your neighbor a clear view into your kitchen. A 6-foot fence with an angled top screen recovers that privacy without a full landscaping overhaul.
- Your existing fence is leaning or rotting at the base. Fog and rain work on wood posts constantly. In districts like the Inner Sunset, we regularly see posts that were set in shallow concrete or straight into soil fail within 8 to 10 years, especially where drainage is poor and water pools at the fence line.
- Street noise and foot traffic reach your living room. A solid fence absorbs a meaningful amount of sound compared to chain link or open rails. On busier corridors in the Mission and Noe Valley, a solid wood or composite fence cuts the constant hum without needing double-pane retrofits.
- You have a corner lot or shared alley with no defined boundary. Corner properties in Bernal Heights and Potrero Hill often have ambiguous lot lines. We handle the survey and placement so the fence sits where it legally should, which saves arguments later.
- You want the yard to work for kids, a dog, or a garden. A 6-foot privacy fence with a self-closing gate keeps a dog in and neighborhood traffic out, and it gives a vegetable garden the wind break it needs on exposed hillsides.
- You’re selling or refinancing and the fence is a liability. A rotted fence shows up in inspection reports. Replacing it before listing avoids a buyer credit at closing.
Why San Francisco Yards Need a Different Approach
Fences that work in the Central Valley don’t always work here. The combination of marine fog, wind exposure on ridge lots, and tight zero-lot-line parcels changes how we build.
In neighborhoods like Diamond Heights, Twin Peaks, and the hills above Glen Park, wind load is real. A poorly anchored 6-foot fence catches wind like a sail and can fail at the posts within a season. We set posts deeper in those zones and use thicker lumber or composite that won’t rack under load. On flatter ground in the Avenues, drainage matters more than wind: soil stays damp nine months out of the year, and a post set in a poorly drained hole will rot from the bottom up even if the rest of the fence is sound.
Lot lines are also tighter here than almost anywhere. Many San Francisco lots run 25 to 30 feet wide, so a fence isn’t a decorative add-on, it’s the thing that defines usable outdoor space. That means fewer inches to waste and more precision on placement.
Our Privacy Fence Process
We keep the process simple and set expectations up front. Every project follows the same path, from first call to final walkthrough.
- Site visit and measurements. A technician walks the property with you, measures the run, checks the existing footings, and confirms lot lines against your survey or plat. We flag any setback or height issues before design starts. If the property line is unclear, we tell you now rather than after the concrete’s poured.
- Design and material selection. We lay out the options in writing: cedar, redwood, composite, vinyl, or pressure-treated pine, along with height, gate configuration, top style (dog-ear, flat, lattice, or angled privacy screen), and finish. You get a clear spec sheet, not a vague sketch.
- Permits and HOA review. Where San Francisco requires a permit for fence work, we handle the application. If you’re in a neighborhood association or a planned development, we help coordinate the approval. We tell you up front what the timeline looks like.
- Demolition and site prep. We remove the old fence and haul it away, then clear and prep the line. Posts are set in concrete to the depth required for wind and soil conditions at your address.
- Build and install. Panels, rails, gates, and finish go in. Gates are hung plumb and swing-tested. We clean the site daily, so you’re not tripping over offcuts for a week.
- Walkthrough and handover. We walk the finished fence with you, confirm every gate closes cleanly, and hand over care guidance for the specific material you chose. That’s the day the 730-Day Done Right Promise begins.
Materials We Work With
We work with a curated set of brands we’ve come to trust for finish, durability, and warranty support. The right material depends on budget, wind exposure, and how much maintenance you’re willing to do.
- Cedar and redwood. The standard for warmth and privacy. Both hold finish well, resist rot better than pine, and look right next to older San Francisco architecture. Cedar needs a re-stain every two to three years.
- Composite. Fade-resistant, no splinters, and holds its color. It costs more up front, but for a household that doesn’t want seasonal maintenance, it pays back over a decade.
- Vinyl. Clean lines, minimal care, and a factory color that holds. Works well in modern backyard layouts but tends to look out of place next to a 1920s Victorian.
- Pressure-treated pine. The practical choice when the priority is coverage and budget. We use it selectively, because pine on a damp fog belt needs a stain schedule to stay sound.
We also use premium siding on fence-adjacent garden structures when the project includes a shed or privacy screen attached to the house. James Hardie fiber cement is one brand we recommend because it holds up in coastal moisture and needs no repainting for years.
Privacy Fence Pricing in San Francisco
San Francisco privacy fence pricing runs higher than most of the Bay Area because of labor, permitting, and lot geometry. Our upfront pricing means the number you see is the number you pay, with no change orders for things we should have caught on the site visit.
| Item | Typical Range |
|---|---|
| Cedar privacy fence, 6 ft, per linear foot installed | $55 – $85 |
| Redwood privacy fence, 6 ft, per linear foot installed | $70 – $100 |
| Composite privacy fence, per linear foot installed | $80 – $130 |
| Vinyl privacy fence, per linear foot installed | $60 – $105 |
| Pressure-treated pine, per linear foot installed | $45 – $70 |
| Gate install (walk gate, with self-closing hinge) | $450 – $1,100 |
| Post replacement and re-footing (per post) | $180 – $425 |
| Old fence removal and haul-away | $8 – $18 per linear foot |
| Permit filing and coordination | $250 – $900 (varies by district) |
For a typical 60-foot run along a San Francisco side or rear yard, most of our projects come in between $3,500 and $7,800 all-in. A few situations push the number up:
- Slope. Hillside lots in Noe Valley, Bernal Heights, or Twin Peaks require stepped panels and taller posts to handle grade change. Budget 15 to 25 percent above flat-ground pricing.
- Access. Driveway width, garage clearances, and tight side yards mean some materials have to be carried in by hand rather than dropped by truck. City jobs routinely add a day of labor.
- Height. Above 6 feet, structural requirements change and permit procedures tighten. A 7-foot privacy screen needs engineered posts and more hardware.
- Removal. Old concrete footings are heavy. Disposing of them in the city adds cost compared with hauling in the suburbs.
- Material grade. Old-growth heart-redwood costs more than construction-grade cedar, and it’s worth it in exposed locations. We’ll tell you honestly which one your site justifies.
For larger projects, we offer 0% financing for 18 months and $1,000 off projects over $10,000. Combined with the free estimate and design consult, that means you can get a real budget number today and understand the financing before you sign anything. Call (866) 320-2646 to set up your free estimate.
Fence Height and Permit Rules in San Francisco
Permits and height limits are the single biggest source of project delays on San Francisco fence jobs. Get the rules right up front and the build moves fast. Get them wrong and you’re likely to be rebuilding at your own cost.
As a general rule, fences in San Francisco residential zones can go up to 6 feet above grade in rear and side yards, with lower limits in front yards depending on the district. Fences over 6 feet, fences on corner lots within sight triangles, and fences in some historic or special-use districts require a permit and in some cases a discretionary review. Rear-yard fences along a property line shared with a neighbor frequently need that neighbor’s sign-off or a recorded disclosure.
Historic districts, which include parts of Pacific Heights, Cow Hollow, and the Mission’s landmark corridor, have additional review. We handle the research district by district so you know before installation starts. It’s one reason we insist on a site visit rather than a phone quote.
What Sets Our Work Apart
Fence work attracts a lot of cut-rate operators. Here’s what’s different about a Groundwork project in San Francisco:
- 730-Day Done Right Promise. If a post settles, a panel warps, or a gate stops closing, we come back and fix it. This is one of the longer workmanship guarantees in the residential construction space.
- Live person, 24/7. Fence emergencies are real: a gate fails and the dog gets out, a windstorm takes down a panel, or a post goes suddenly soft. You can reach a real human any hour.
- Upfront pricing, no surprises. The scope and price you approve on paper is the price on the invoice.
- A curated set of brand partners. We work with the manufacturers we’d put on our own homes, from siding and decking suppliers to hardware makers. That’s how a fence stays “built to last, backed in writing.”
- Background-checked, uniformed technicians. Same crews on demo day as on install day, on every job.
For full-scope work that covers fence and landscaping in one pass, we also coordinate with our teams on Driveway & Pavers in San Francisco so hardscape and boundary work line up cleanly.
Privacy Fence Styles That Work in San Francisco
The style of fence matters as much as the material. Here are the options we build most in the city:
- Dog-ear or flat-top privacy panels. The workhorse for rear yards. Solid construction, full privacy, and a clean profile that fits almost any architectural style.
- Board-on-board. Overlapping boards on both sides eliminate the gap-through-sightline problem and hold up well in wind.
- Lattice top. A good compromise for historic districts and neighbors who want more light. Full privacy below, open lattice above.
- Angled privacy screen. Angled boards on top of a standard fence give extra height where sightlines from a neighbor’s second story are the issue. Common in Sunset and Richmond District lots.
- Horizontal slat. A modern look that fits contemporary homes and rebuilds. Slat spacing can be tuned to block sightlines while keeping airflow.
- Fence with integrated gate. A well-hung gate is the thing everyone notices first. We use heavy-duty hinges and full-height framing so the gate doesn’t sag in two years.
If you want the fence to visually match siding on a garden room or a fence-adjacent addition, James Hardie or a matching composite is the way to go. We’ll point you to the closest match.
Maintenance: What to Expect After Install
How a fence holds up depends on the material and how it’s maintained. Here’s the honest picture for San Francisco conditions:
- Cedar and redwood: inspect annually for soft spots at the base. Re-stain every two to three years. In heavily shaded yards near Golden Gate Park, watch for moss and clean with a light vinegar solution if it appears.
- Composite: wash once a year with mild soap and a soft brush. No staining needed.
- Vinyl: rinse occasionally. Replacing a cracked panel is straightforward.
- Pressure-treated pine: re-stain every 18 to 24 months. More upkeep, but a lower entry cost.
If anything goes wrong that traces back to our workmanship, the 730-Day Done Right Promise covers it. That includes post settling, panel warping, misfit joints, and gate misalignment.
FAQs – Privacy Fence
How much does a privacy fence cost in San Francisco?
A typical privacy fence in San Francisco costs $3,200 to $9,500 installed, with per-linear-foot pricing of $45 to $130 depending on material. Cedar and redwood sit in the middle of that range, composite is highest, and pressure-treated pine is the lowest entry point. Permits, slope, and access can each add 10 to 25 percent. Call (866) 320-2646 for an exact quote – estimates are free.
Do I need a permit for a privacy fence in San Francisco?
In most cases, yes, if the fence exceeds 6 feet or sits in a special-use or historic district. Many rear-yards at exactly 6 feet are permitted with a simple over-the-counter application, while others require a planning review. Corner-lot fences within sight triangles almost always require approval. We research the specific rules at your address and handle the filing, so you’re not guessing.
How long does a privacy fence installation take?
Most San Francisco privacy fence projects finish in two to four days once permits are in hand. A straight 60-foot run on flat ground is usually a two-day job. Hillside yards with stepped panels, tight access, or old concrete footings to remove can stretch to four or five. Permit wait time is the bigger variable and can add two to eight weeks depending on the district.
Is it cheaper to repair or replace my privacy fence?
Repair beats replacement when one to three panels or two or three posts are the problem, and the rest of the structure is sound. In San Francisco, we often see posts reach end of life before the panels do because of shallow footings and wet soil. If more than roughly a quarter of the posts are soft at the base, replacement is usually the better spend and the better warranty story. We’ll tell you which side of that line you’re on after the site visit. Call (866) 320-2646 to schedule a free assessment.
What’s the tallest privacy fence I can build in San Francisco?
Without a permit, 6 feet is the standard ceiling in most San Francisco residential zones. With a permit, and depending on the district, 7 to 10 feet is possible in rear yards, but taller fences need engineered posts and often a discretionary review. The exact answer depends on your zoning and whether your lot is in a special or historic district. We’ll tell you the number for your address before design starts.
Can a neighbor object to my privacy fence?
Yes, and in San Francisco it’s common. Fences on a shared property line usually require the neighbor’s cooperation, and going through the planning department without their sign-off can stall a project for months. Our advice: get the boundary confirmed by survey, talk to the neighbor before the permit is filed, and use a style that doesn’t throw large shadows onto their yard. We work with you on the approach.
Related Services and Neighborhoods
Privacy fence work often pairs with other backyard and boundary upgrades. If you’re planning a broader project, these pages are the next step:
- Groundwork Construction Co. of San Francisco – full-scope home construction, from foundation to finish line
- Fence Installation in San Francisco – the full-service overview
- Driveway & Pavers in San Francisco – hardscape that works with new fence lines
- Home Additions & ADU in San Francisco – rear additions that affect fence and privacy layout
- Patio Installation in San Francisco – a natural pair with a new privacy fence
- Deck Installation in San Francisco – privacy fencing and deck framing in one scope
- Gate Installation in San Francisco – heavy-duty gates and automated drive gates
- Landscaping in San Francisco – layout that respects the new boundary
- Fence Repair in San Francisco – when a post or panel fails
- Fence Installation in Daly City – neighboring city service
- Fence Installation in Oakland – across the bay service
- Wood Fence Installation in San Francisco – cedar, redwood, and pressure-treated
Call Groundwork for Your San Francisco Privacy Fence
Privacy fence work is one of those projects where the details matter more than the price line. Footing depth, panel alignment, drainage, permit compliance, and gate hardware decide whether a fence lasts a decade or needs a second visit in two years. We handle all of it, and we back the work with the 730-Day Done Right Promise. Calls are answered live, 24/7, and estimates are free. Reach us at (866) 320-2646 and we’ll set up your site visit.
Written by the team at Groundwork Construction Co. of San Francisco, serving San Francisco.