Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Pacifica, CA: What the Job Actually Involves
An iron fence in Pacifica, CA typically runs $3,500 – $9,000 for a standard residential run, with most homes landing in the $4,800 – $7,200 range once posts, footings, finish and gate hardware are counted. Plan on 3 – 6 working days on site, plus 2 – 4 weeks ahead of that for fabrication and any coastal permit review. Call (866) 320-2646 for a free on-site estimate. The number you see is the number you pay, and every install carries our 730-Day Done Right Promise.
How an Iron Fence Goes In, Stage by Stage
Iron fencing isn’t a pick-it-off-the-shelf job. The panels are built to your measurements, and the site conditions here decide half the plan before a single hole gets dug. Here’s the real sequence.
Stage 1: Walk-through and measurements (day 1, about 90 minutes)
We walk the property line with you, confirm exactly where the fence runs, and check what’s underground and overhead. On Pacifica’s sloped marine-terrace lots, that often means flagging drainage swales, existing irrigation, and any utility stubs. You decide the run, the gate locations, and whether this is part of a full Fence Installation in Pacifica project touching the rest of the yard. We take grades and set elevations; on a hillside, a fence that steps with the terrain reads very differently from one held level.
Stage 2: Permits and HOA sign-off (days 2 – 10, mostly waiting)
Height rules, property-line verification and, on bluff-adjacent lots, coastal development review all get handled here. We pull the permits and pass the inspections; you don’t chase paperwork. If your parcel has an HOA, this is also when finish color and fence height get approved in writing.
Stage 3: Fabrication (days 10 – 21)
Panels, posts and gates are cut and welded to the final dimensions. You pick the metal, the finish and the picket spacing at the quote stage, so nothing gets rebuilt later. This is the longest single stretch, and it’s where a rushed shop gives you a fence that fits badly.
Stage 4: Setting posts and footings (days 1 – 2 on site)
Posts go into concrete footings dug to depth and set plumb. On sloped Pacifica lots, footing depth and drainage matter more than on flat ground, since winter runoff is the thing that eventually moves a post. We set the line and check it against the survey before any concrete goes in.
Stage 5: Hanging panels, gates and final inspection (days 3 – 6 on site)
Panels mount to the posts, gates get hung and adjusted, hinges and latches go in, and the whole run gets a final check for alignment and any finish touch-ups. The inspection closes out, and we walk the job with you before we call it done. Anything that isn’t right gets fixed under the 730-Day Done Right Promise, in writing.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Iron fencing is a category, not one product. These are the real decisions, and each one moves the price and the lifespan.
- Wrought iron vs. steel: Traditional wrought iron is hand-forged, heavier, and priced at the top of the range. Steel is stronger per pound and far more common now, and it holds up better against the salt air if the finish is right. For most Pacifica homes, steel is the honest pick.
- Powder-coated vs. painted finish: Factory powder coating resists coastal corrosion far better than field paint, and it’s worth the upcharge here. It also holds its color longer in the fog belt.
- Picket spacing and height: Tighter spacing and taller runs cost more in material and weight. If the fence is a boundary marker rather than a security line, wider spacing saves money.
- Gates and hardware: A single walk gate is a modest add; a double drive gate with self-closing hinges and a keyed latch pushes the job toward the high end. Decide this early, since gates are fabricated with the panels.
- Post caps and finials: Decorative tops are a small line item that changes the look substantially. Worth deciding at the quote, not after.
Where the finish and hardware matter most, we specify top-tier brands, the same way we’d spec James Hardie or KraftMaid on a build. Quality materials are the difference between a fence that lasts a decade and one that lasts a generation.
What Iron Fence Costs in Pacifica, CA
Expect $3,500 – $9,000 for a typical residential iron fence in Pacifica, with most jobs in the middle of that band. Here’s how the number breaks down before you commit.
| Line item | Typical range |
|---|---|
| Fence material and fabrication (per linear foot) | $45 – $95 |
| Post setting, footings and concrete | $600 – $1,800 |
| Walk gate (hung and latched) | $400 – $1,200 |
| Double drive gate | $900 – $2,500 |
| Permit and inspection fees | $150 – $600 |
| Powder-coat finish upgrade | $300 – $900 |
What pushes a job to the low end: a short, straight run on level ground, steel rather than wrought iron, a single walk gate, and no permit complications. What pushes it high: a long run on a steep hillside lot, multiple gates, coastal permit conditions, and a premium finish. Removing an old fence adds demo time.
Your written estimate itemizes everything: linear footage, post count, gates, finish, permits and disposal. What’s typically not included is correcting an existing footing or drainage problem found once we dig, which we flag and quote before proceeding, not after.
See the difference
Before
After
Before
After
Before
AfterWhat Pacifica Homes Specifically Do to This Job
Pacifica’s climate is the single biggest factor in how an iron fence here lives or dies. The coastal fog belt, salt-laden onshore winds and heavy winter storms off the Pacific attack fasteners and finishes relentlessly, which is why corrosion-resistant steel and a factory powder coat aren’t optional upgrades on this coast. The housing stock matters too: the 1950s – 70s stucco-and-wood ranch homes and split-levels, plus the older beach cottages around Rockaway and Linda Mar, often sit on sloped lots with existing drainage quirks that a new fence has to work around. On bluff-edge and marine-terrace properties, footing depth and erosion control get more attention than anywhere inland, since a footing that looks solid in August can be undermined by winter runoff. Permitting reflects that: coastal development review and, on some parcels, geotechnical scrutiny come into play before a fence line on a bluff-adjacent lot can proceed.
Serving Pacifica, CA – Our Local Coverage Area
We serve Pacifica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Iron Fence in Pacifica
Plan on 3 – 6 working days on site once fabrication is finished, with 2 – 4 weeks of fabrication and permitting ahead of that. Most Pacifica homeowners see a fully finished fence within about a month of signing. Call (866) 320-2646 to get a specific timeline for your property.
Often yes, especially near the coast, on bluff-adjacent lots, or when the fence exceeds standard height limits. We pull the permits and pass the inspections for you. Call (866) 320-2646 and we’ll confirm what your specific parcel requires.
Usually yes. Post footings are the only ground disturbance, and we set them to avoid existing irrigation, drainage and hardscape. On tight hillside lots we plan the layout around what’s already there. Call (866) 320-2646 to walk your site with us.
Most residential iron fences in Pacifica run $3,500 – $9,000, with the middle of that range covering a standard run with a walk gate and powder-coated steel. Call (866) 320-2646 for an exact quote; estimates are free.
Every iron fence install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship for two full years, backed in writing. Call (866) 320-2646 to review the details before you commit.
Get a Free Iron Fence Estimate in Pacifica
A free on-site estimate starts with a call to (866) 320-2646. We’ll walk your property, measure the run, talk through steel versus wrought iron and finish options, and hand you a written, itemized quote with no surprises. If you’re also planning a patio or walkway refresh, homeowners often pair this with Patios, Walkways & Pool Decks in Pacifica, and for larger projects a ADU Design & Permitting in Pacifica conversation; our wider Fence Installation service covers the full scope, and we serve all of Pacifica. Live person answers, 24/7. $1,000 off projects over $10,000, plus 0% financing for 18 months.
Written by the team at Groundwork Construction Co.