Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Paver Driveways in Tiburon, CA: What the Job Actually Takes
Paver driveways in Tiburon typically cost between $7,000 and $18,000, depending on slope, access, and the paver you choose. The work itself runs three to six days once we’re on site, but a steep hillside lot above downtown Tiburon can add prep time for grading and staging. Call (866) 320-2646 for a free on-site estimate sized to your actual driveway, not a ballpark. We’re licensed and insured, and every quote is written line by line.
How We Build a Paver Driveway Here, Stage by Stage
The sequence on a paver driveway matters more than people expect, especially on the slopes this town is built on. Here’s the real order of work and where you’ll be making decisions along the way.
- Day 1 – Layout and demo. We mark the driveway edges, confirm the finish grade with you against your garage apron and any drainage swales, then remove the existing surface. On a narrow hillside drive above Main Street, this is also when we settle staging: where the dumpster sits, where pallets land, and whether a small machine can reach the cut or everything gets walked in. You’ll confirm the paver and the border pattern before demo starts.
- Day 2 – Excavation and grading. We cut down to subgrade, shape it to the correct fall so water runs off and away from your garage, and correct soft or uneven soil. This is where a Tiburon job diverges from a flat-lot job: A steep drive often needs a stepped or warped grade, and occasionally a small retaining edge at the low side. You approve any grade change before base goes in.
- Day 2 – 3 – Base and compaction. We lay and compact the aggregate base in lifts, checking slope as we go. A proper base is most of what keeps pavers from settling and heaving, and it’s invisible once the job is done, which is exactly why it’s the stage we refuse to rush.
- Day 3 – 4 – Edge restraint and bedding. We set the edge restraint, which holds the field in place against the pressure of tires and slope, then screed the bedding layer. You’ll have already chosen the edge finish: paver soldier course, a contrasting band, or a flush cut against lawn.
- Day 4 – 6 – Laying, cutting, and finish. We lay the field, cut in around curves and the garage opening, compact the surface, sweep in joint sand, and walk the finished driveway with you. Final cleanup and haul-off close it out.
Every stage has a checkpoint where you see and approve before we move on. That’s part of what the 730-Day Done Right Promise covers: if something isn’t right in the finished driveway, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Paver Options You’ll Choose Between
Paver driveways are a short list of real choices, and each one trades cost against how it wears on a hillside in Marin’s fog belt.
- Concrete pavers (interlocking). The standard choice for a driveway under regular car weight. Dense, colorfast, and repairable one paver at a time if it ever chips. Belgard makes a solid range here, and the honest trade-off is that a textured or tumbled finish grips better on a sloped drive than a smooth one.
- Clay brick pavers. Warmer color, very long life, and it holds up well against moisture cycling. It costs more than concrete, and the harder surface can be slicker when wet, so on a steep drive we’d steer you toward a matte or sand-finish brick.
- Permeable pavers. Open-joint systems that let rain pass through to a gravel bed. Worth considering if your drive drains toward the house or a neighbor’s lot. They cost a bit more up front and need occasional vacuuming to keep the joints open.
- Thickness. 60mm pavers handle foot traffic and light use; 80mm is what a driveway with full-size vehicles deserves. We default to 80mm on driveways.
- Pattern and border. A running bond or herringbone field with a soldier-course border reads crisp and holds up well. Herringbone is the most resistant to lateral shifting on a slope.
The bigger decision is often drainage: whether to pitch the whole drive to the street, or add a channel drain at the garage threshold. We’ll walk that with you on the estimate visit.
What Paver Driveways Cost in Tiburon, CA
Most paver driveway installations here land between $7,000 and $18,000. That spread is wide because a few variables do most of the work.
| Variable | What pushes it low vs. high |
|---|---|
| Size and shape | A single-car, straight-run drive sits at the low end. A long, curved, or multi-bay drive with cuts and borders moves toward the top. |
| Slope and grading | A flat Marin lot keeps prep simple. A steep hillside drive that needs stepped grade or an edge retaining detail adds excavation and base time. |
| Access | If a truck and machine can reach the site, standard. A hairpin drive where pallets get walked in adds labor. |
| Paver grade | Standard concrete pavers at the low end; premium clay brick, permeable systems, or complex patterns at the top. |
| Drainage scope | A channel drain at the threshold or a tie-in to an existing swale is a line item. So is a small retaining edge. |
A written estimate from us itemizes demo, base, restraint, pavers, cutting, and haul-off so you can see where the number comes from. Upfront pricing means the number you see is the number you pay; no surprise change orders. What’s typically outside the estimate: relocating utility lines, major retaining-wall construction, and any landscaping around the edges. We’ll flag those on the visit if they apply. If the driveway is part of a bigger outdoor project, our Driveway & Pavers in Tiburon page covers the full scope.
See the difference
Before
After
Before
After
Before
AfterHow Tiburon’s Slopes and Salt Air Shape This Job
This is a steep-hillside peninsula town where nearly every construction project is really a site-engineering project. On the winding roads above downtown Tiburon and around Belvedere-Tiburon, narrow drives, tight lots, and limited parking mean we plan staging and access before we ever price the pavers. A skid-steer that reaches a flat Corte Madera driveway may not reach yours, so materials get walked or craned in, and that reality adds time and cost that a flatter Marin town never sees.
The climate works on the finished driveway too. Salt air off Richardson Bay and the bayfront corrodes fasteners and metal edge restraints years faster than inland, so we spec galvanized or coated restraint and stainless fasteners where they’ll see spray and fog. Winter rain and constant moisture cycling push drainage up the priority list: a drive that sheds water correctly lasts, one that ponds against the garage threshold doesn’t. Housing stock ranges from early-1900s cottages near downtown to mid-century and contemporary hillside homes, and many drives were poured for a smaller car than what’s parked there now. We see settled, cracked, or oil-stained surfaces that a paver drive corrects in one job. Call (866) 320-2646 to schedule an estimate, and we cover all of Tiburon and the peninsula.
Serving Tiburon, CA – Our Local Coverage Area
We serve Tiburon and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Paver Driveways in Tiburon
Most paver driveways in Tiburon take three to six days of on-site work once materials arrive. Steep access and hillside grading push a job toward the longer end, and we’ll give you a firm schedule in the written quote before anything starts.
It depends on scope: a straight replacement of a driveway surface in kind usually doesn’t, but grading changes, drainage re-routing, or any retaining structure can trigger one. We check that against your property before the estimate is finalized, and we pull the permit and pass the inspection when one is required. Our Driveway & Pavers service team handles that step for every hillside job.
Yes, in most cases. Paver work stays outside the footprint, so we don’t move plumbing or structure. The exceptions are relocating a utility line that runs under the drive or adding a retaining edge that needs engineering; if either comes up, we’ll tell you before work starts, not after.
Expect $7,000 to $18,000, with slope, access, size, and paver grade driving the spread. Call (866) 320-2646 for an exact quote on your drive; estimates are free and handled by a live person around the clock.
Our paver driveway work is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right for two full years. That sits alongside the manufacturer warranty on the pavers themselves. Homeowners often pair a driveway refresh with ADU Design & Permitting in Tiburon or a Garage Conversion ADU in Tiburon, and we scope both together when it helps.
Get a Free Estimate for Paver Driveways in Tiburon
Call (866) 320-2646 to book a free on-site estimate for paver driveways in Tiburon. A live person answers any hour, and we’ll come out, measure your drive, talk through slope and access, and hand you a written line-item quote. Financing is available at 0% for 18 months, with $1,000 off projects over $10,000. No pressure, just a real number for your driveway.
Written by the team at Groundwork Construction Co.