Roofing
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tile Roofing in San Bruno, CA: What the Job Actually Involves
Tile roofing in San Bruno runs $600 – $2,500 for a targeted repair and $8,000 – $20,000 for a full tile roof replacement, with most repair calls finished in a single day and full replacements taking three to six working days. The work means lifting and matching the existing field tile, replacing the underlayment and flashings beneath it, then re-laying tile to the original pattern. Call (866) 320-2646 and we’ll put a written, line-item number in front of you before anything is ordered or torn off.
How We Run a Tile Roof Job, Start to Finish
Tile isn’t a shingle job with different-looking material. The tile is the wear surface, but the waterproofing lives in the underlayment and the flashings below it, and everything hinges on how carefully those get built. Here’s the real sequence.
- Day 1 – Inspection and documentation. We walk the roof, photograph cracked and slipped tile, probe the underlayment at valleys and penetrations, and check the flashings at chimneys, skylights and vent stacks. You get a written report with what’s repairable and what’s past saving. You decide repair versus replacement from that report, not from a sales pitch.
- Day 2 – Permit and material order. We pull the roofing permit and order tile to match, which matters on a San Bruno roof where the original color and profile may be discontinued. Blending a new field of tile into a weathered roof is a real decision point; we’ll show you samples against the existing tile in daylight before you commit.
- Days 2 – 3 – Tear-off and deck inspection. Tile comes off and gets stacked and sorted for reuse where it’s sound. The sheathing underneath gets inspected board by board. On older San Bruno homes we regularly find soft spots and rot around valleys and chimneys, and that’s a conversation you’ll have with us before we cover anything back up.
- Days 3 – 5 – Underlayment, flashing, tile. New underlayment goes down, followed by new valley metal, step flashing and counter-flashing at every penetration. Tile is then re-laid to the original pattern, with broken pieces swapped out. This is the stage that determines whether the roof lasts, and it’s the stage cheap bids skip.
- Final day – Inspection and cleanup. The city inspector signs off, we magnet-sweep the yard and driveway for nails, and we walk the roof with you. You get the written workmanship guarantee at that walkthrough, not in an email weeks later.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make on a Tile Roof
Most of the decision is made before a single tile comes off. Here’s what you’re really picking between, with the honest trade-offs.
- Clay versus concrete tile. Clay holds color for decades and suits the Mediterranean profiles common on the Peninsula, but it’s brittle and pricier to match. Concrete is heavier, cheaper per square, and available in more profiles. Both handle San Bruno’s damp marine air well if the underlayment beneath them is right.
- Repair and match versus full replacement. A repair makes sense when the underlayment is still sound and the leak is isolated. Once the underlayment is at the end of its life, patching is throwing money at a problem that will move to the next valley.
- Underlayment grade. This is the single biggest quality lever and the one most homeowners never see. A premium synthetic underlayment costs more up front and lasts far longer than the felt used on older roofs. We’ll show you both and explain the difference in plain terms.
- Tile profile and color. Matching an existing roof is the goal on a repair. On a replacement you have room to choose, and we’ll bring samples so you can see them against your exterior in real light.
What Tile Roofing Costs in San Bruno, CA
Tile roof repair in San Bruno typically lands between $600 and $2,500, and a full tile roof replacement runs $8,000 – $20,000. Those ranges hold because they’re built from real San Bruno jobs, not national averages.
What pushes a job toward the high end: roof size and pitch, the condition of the sheathing once tile comes off, how many penetrations and valleys need new flashing, whether the tile has to be special-ordered to match a discontinued profile, and how much of the original tile can be salvaged. A steep roof or a complicated valley layout adds labor. A straightforward repair on a single-story ranch home sits at the low end.
A written estimate from us covers tear-off, disposal, underlayment, flashings, tile and the permit. What it typically doesn’t cover is hidden rot discovered after tear-off, which we photograph and price before proceeding, and any structural repair that falls outside the roofing scope. That’s why we put it in writing: the number you see is the number you pay, and any addition gets your approval first. If the tile work is part of a full Roofing in San Bruno project, we’ll scope both together so nothing gets double-charged.
See the difference
Before
After
Before
After
Before
AfterWhat San Bruno Homes Specifically Do to This Job
San Bruno’s housing stock shapes tile work here in ways it doesn’t in most Bay Area cities. The Crestmoor neighborhood and the streets around it are dominated by post-WWII single-family homes from the 1940s and 1950s, and a large share were rebuilt or heavily retrofitted after the 2010 PG&E pipeline explosion. That means we work on two very different roofs on the same block: newer, seismically compliant structures and older homes still carrying original sheathing and aging flashings. The older ones are where we find the most tile leaks, usually at chimneys and valleys where decades of marine-layer moisture have worked on the wood beneath.
The fog belt matters too. Cool, damp summers and steady onshore wind off the Pacific accelerate rot in sheathing and trim, which is why proper flashing and weather-resistant detailing aren’t optional here. Contractors working in the 94066 zip also need to know the city’s post-2010 seismic requirements and the PG&E gas line clearance procedures that can hold up any digging near the Crestmoor zone. We cover all of San Bruno and the surrounding Peninsula, and we plan around those inspections rather than getting surprised by them. Homeowners often pair a roof project with Impact Windows & Doors in San Bruno or Energy-Efficient Windows in San Bruno while the scaffolding is already up, and we’re glad to coordinate the trades through our Roofing service so you’re not managing three contractors.
Serving San Bruno, CA – Our Local Coverage Area
We serve San Bruno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Tile Roofing in San Bruno
A tile roofing repair usually finishes in one day, and a full replacement takes three to six working days depending on roof size and how much sheathing needs repair. Weather can add a day, and the permit inspection is scheduled within that window. Call (866) 320-2646 and we’ll give you a realistic schedule for your specific roof.
Yes, a full tile roof replacement requires a permit and an inspection, and we pull it for you. Repairs vary by scope, and we’ll tell you plainly whether yours needs one. Doing the permit work correctly up front protects you at resale, and it’s built into every written estimate.
Often yes, if the underlayment is still sound and the leak is isolated to a valley, flashing or a field of cracked tile. We’ll tell you honestly when a repair is the right call and when it’s just delaying a replacement. Call (866) 320-2646 for a free inspection that answers that question.
No, not for the scope in your written estimate. If we open the roof and find rot or damaged sheathing, we photograph it, explain it, and price the addition before doing anything. You approve it or we stop. That’s how upfront pricing is supposed to work.
Every tile roofing project we complete is backed by our 730-Day Done Right Promise: if it isn’t done right, we make it right. That covers our workmanship on top of the manufacturer’s material warranty. You get it in writing at the final walkthrough, and our technicians bring up to 12 years of experience to the job.
Get a Free Tile Roofing Estimate in San Bruno
If your tile roof is leaking, cracked or simply past its useful life, the next step is a free on-site estimate. Call (866) 320-2646 and a live person answers, day or night. We’ll inspect the roof, photograph what we find, and hand you a written, line-item number with the permit and the 730-Day Done Right Promise spelled out. No pressure and no vague bids.
Written by the team at Groundwork Construction Co.