Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Corte Madera, CA: What the Job Really Involves
Vanities, tile and fixtures in Corte Madera typically runs $9,000 – $28,000 for a full bathroom’s worth of work, with most projects finishing in two to four weeks from demo to final grout. The variable that decides it isn’t the tile you pick; it’s what’s behind the wall. Corte Madera’s mix of mid-century ranchers and replaced custom homes means we’re often opening up a 1960s mud bed or a 1970s builder-grade vanity and finding framing that needs work before anything new goes in. Call (866) 320-2646 for a free on-site estimate.
How Our Vanities, Tile & Fixtures Process Runs, Stage by Stage
People want to know what happens on Monday and what happens on Friday, so here’s the actual sequence we follow.
Stage 1: Measure and demo (days 1 – 2). We pull the old vanity, mirror, fixtures and tile, cutting back to the framing and the rough plumbing. This is the discovery stage. On a 1955 ranch off Corte Madera Avenue, that often means finding a lead-panned drain or a floor flange that’s cracked twice over. You’ll decide nothing today; we document what we found and photograph it so the written estimate stays honest later.
Stage 2: Rough-in and inspection (days 3 – 5). If the vanity moves, a drain relocates or a shower valve needs a new supply line, the plumber roughs it in now, before any board goes up. Electrical for a lit mirror, an outlet in the vanity cabinet or a heated towel bar goes in the same window. If a permit was pulled, the rough inspection happens here, and nothing gets covered until it passes.
Stage 3: Waterproofing and backer (days 5 – 7). Cement board goes on the walls and floor, seams are taped and set, and we apply a bonded waterproofing membrane to the wet areas. This is the stage homeowners never see and the one that decides whether the tile survives a wet Corte Madera winter. You don’t decide anything here; you get photos of the flood test or membrane coating before tile touches it.
Stage 4: Tile layout and setting (days 7 – 14). This is where your decisions land. We dry-lay the layout first and walk you through it: where the grout lines fall, how the large-format field tile meets the accent, how the niche gets trimmed. Once you sign off on layout, tile goes up and grout follows after the thinset cures, a minimum of 24 hours. Porcelain on a Schluter-type membrane goes quickly; natural stone in a herringbone pattern takes twice the labor.
Stage 5: Vanity, fixtures and trim (days 14 – 21). The vanity cabinet sets, the top templated if it’s stone, and the faucet, drain, mirror, lighting and accessories go on. Final trim and caulk last. You walk the finished room with us, and anything that isn’t right gets fixed before we hand you the keys. The whole job, from demo to final walkthrough, is typically two to four weeks, with tile work taking the bulk of the calendar time.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between for Vanities, Tile and Fixtures
- Vanity cabinet grade. A stock box from a home center runs a fraction of a semi-custom KraftMaid or Wellborn cabinet, but it won’t survive a wet-floor environment as gracefully and the plywood drawers outlast particleboard by years. Semi-custom lets you fit the odd wall dimensions common in older Corte Madera homes.
- Countertop material. Quartz, such as Cambria, holds up in a bathroom with zero maintenance and no sealing. Marble looks exceptional but etches from toothpaste and hard-water minerals. Cultured marble is the budget choice and looks it.
- Tile body. Porcelain is dense, water-resistant, and forgiving in a wet room; it’s the workhorse for bathroom floors and shower walls. Natural stone (travertine, marble, slate) shows warmth but needs sealing and re-sealing, and the hone or polish finish is a lifelong commitment.
- Tile size and pattern. Large-format floor tile (12×24 or larger) minimizes grout lines and looks cleaner but demands a dead-flat substrate. Mosaic and penny rounds forgive a wavy floor and old subfloor deflection but cost far more in labor.
- Fixtures. A Kohler or Delta faucet with ceramic-disc cartridges will outlast a builder-grade one many times over, and replacement cartridges are easy to find. Cheap trim is the opposite: corrosion, drips, and a full swap within a few years.
- Shower valve and trim. Thermostatic pressure-balanced valves cost more up front and eliminate the “someone flushed the toilet” scald; a standard pressure-balance valve is fine in a one-bathroom home where nobody’s showering at the same time as dishwashing.
What Vanities, Tile & Fixtures Costs in Corte Madera, CA
Plan on $9,000 – $28,000 for vanities, tile and fixtures in Corte Madera, with the low end covering a straightforward guest bath and the high end covering a primary bath with a large walk-in shower, stone top and natural-stone floor.
| Line item | Typical range |
|---|---|
| Vanity installation (cabinet, top, sink, faucet) | $800 – $3,000 |
| Tile work: floor and shower walls | $3,500 – $11,000 |
| Waterproofing and substrate prep | $1,200 – $3,500 |
| Plumbing rough-in and fixture set | $1,500 – $4,500 |
| Electrical (lighting, outlets, fan) | $800 – $2,500 |
| Permit and inspection fees | $400 – $1,500 |
What moves the number: size of the room (a 5×8 guest bath versus a 9×10 primary); existing condition (rot behind the vanity, failed pan, cracked drain); moving plumbing or electrical (relocating a drain or adding a circuit is real money); material grade (porcelain versus quarried marble can swing the tile line by thousands); and permit scope (a straight tile swap versus a full rough-in inspection).
A written estimate from us lists each line item and where the money goes. What it can’t include until we open the wall: hidden rot, old galvanized supply lines, and any structural repair found during demo. Those get quoted in a written change order before any extra work happens, never slipped onto the final bill.
Part of a larger whole-house update? Homeowners often pair this with Bathroom Remodeling in Corte Madera, and our Bathroom Remodeling service covers the wider scope if you’re considering a full redo rather than a fixture and tile refresh.
See the difference
Before
After
Before
After
Before
AfterWhat Corte Madera Homes Specifically Do to This Job
Corte Madera’s housing stock shapes vanities, tile and fixtures in ways that don’t show up in other towns. The mid-century ranchers and split-levels from the 1950s – 70s that dominate the flats near Corte Madera Creek often have a cast-iron drain that’s rusted past the point of saving and a subfloor that’s been quietly bracing for decades. When we pull a vanity in a home near the Town Center, we expect to find rot where the cabinet leaked into the framing; it’s the rule, not the exception.
The wet-winter marine climate adds a second layer. Homes in the flood-zone flats carry moisture in the lower wall cavities at a level most inland towns never see, so waterproofing membranes and cement board aren’t a nice-to-have here, they’re the whole job. We specify a bonded membrane on every wet area, and we check the sill and subfloor for signs of seasonal wicking before any tile gets set. On the hillside lots above town, the story is drainage; a bathroom added over a crawlspace can ride a slope, and a deflection check is part of the estimate.
If a permitted scope triggers an inspection, the Town’s building department runs a standard rough and final permitting sequence, and flood-zone homes carry elevation requirements that affect where fixtures sit and how drainage ties in. When you’re planning to renovate a bathroom in Corte Madera, we pull the permits and walk the final inspection with you. Doing a full gut at the same time? Homeowners in this town often pair bath work with Tile Roofing in Corte Madera or Specialty Roofing in Corte Madera while the crew is already on site. Our crews cover the whole of Corte Madera, from the marsh-side flats to the hillside neighborhoods above.
Serving Corte Madera, CA – Our Local Coverage Area
We serve Corte Madera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vanities, Tile & Fixtures in Corte Madera
A typical bathroom runs two to four weeks from demo to final walkthrough. Tile work is the biggest time driver: a porcelain floor and shower wall with a simple layout moves quickly, while a natural-stone herringbone or a mosaic with decorative insets can add a week of setting and grouting alone. Call (866) 320-2646 and we’ll put a realistic calendar against your specific room.
Any job that moves or adds plumbing, electrical, or a shower pan and drain requires a permit in Corte Madera. A straight tile-over-tile swap or a vanity cabinet replacement generally doesn’t. We tell you which scope you’re in on the estimate, we pull the permits when they’re required, and we walk the rough and final inspections with you.
Yes, and it’s how most of our jobs here go. Keeping the vanity footprint, sink location and shower drain where they are saves $1,500 – $4,500 in rough-in and inspection costs and shaves a week off the schedule. We’ll tell you on the walkthrough if moving a fixture is worth it (usually for a primary bath, rarely for a guest bath), and we’ll tell you honestly if it isn’t.
Expect $9,000 – $28,000 for a full bathroom’s worth of tile, vanity, fixtures, substrate and finish work, with a simple guest bath landing in the low-to-mid range and a primary bath with a large shower and stone top near the top. Material grade and existing wall condition are the biggest levers. Call (866) 320-2646 for an exact quote; estimates are free, and they come with a written line item for each stage.
Every job we complete is covered by our 730-Day Done Right Promise: if anything about the craftsmanship fails within two years, we come back and make it right. The workmanship and the labor are ours to stand behind. Product warranties (KraftMaid cabinets, Kohler fixtures, and manufacturer defect coverage) run their own terms and we’ll tell you exactly what each one covers.
Ready for a Real Number on Vanities, Tile & Fixtures?
Call (866) 320-2646 to schedule a free on-site estimate for vanities, tile and fixtures in Corte Madera. We’ll measure the room, check what’s behind the vanity and under the tile, talk through materials and layout, and leave you with a written line-item estimate and a realistic calendar. No pressure to sign, no surprise line items later. If it’s within our scope, we walk the whole job with you, and we answer the phone when you call.
Written by the team at Groundwork Construction Co.