Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in Daly City, CA: What the Job Actually Runs
Replacing a vanity, tile, and the fixtures that go with it in Daly City typically runs $9,000 – $28,000 and takes two to four weeks of active work. A vanity-only swap lands at the low end near $800 – $3,000; a full floor-and-wall tile package with new fixtures pushes toward the top. Call (866) 320-2646 for a free on-site estimate and a written, line-item quote before anything gets demoed.
How the work actually sequences, day by day
This isn’t a vague “we handle everything” job. Vanities, tile, and fixtures move through five distinct stages, and you make decisions at each one. Knowing the order is how you avoid the classic mistake of buying a vanity before the plumbing rough-in is confirmed.
Stage 1: Site measure and rough-in check (day 1). We measure the vanity footprint, verify the drain and supply locations, and pull the tile layout. This is where old rot gets found. In a 1950s Daly City stucco home, a vanity removal often exposes soft subfloor and a scarred wall behind the old backsplash. You decide the tile pattern and grout color here, and we flag anything that changes the scope before a single box is opened.
Stage 2: Demo and prep (days 2 – 3). We remove the old vanity, fixtures, and tile, then assess the substrate. Cement backer board goes down over sound framing; damaged subfloor gets cut out and replaced. This stage is where a job either stays on budget or grows, so we photograph what we find and quote any addition before proceeding. You approve or decline in writing.
Stage 3: Plumbing and electrical rough-in (days 3 – 4). If you’re relocating the vanity or adding a second sink, the supply and drain lines move now, and the GFCI outlet for the vanity lighting gets set. If you’re keeping the existing layout, this stage is quick. You confirm fixture placement and light-switch height here.
Stage 4: Tile setting and grouting (days 5 – 9). Floor tile sets first, then wall tile, then grout and seal. Large-format tile takes longer to level; small mosaic goes faster but needs more grout care. You’ll want to stay off the floor for 24 hours after grout, and we protect the drain and toilet flange throughout.
Stage 5: Vanity set, fixtures, and final (days 10 – 12). The vanity goes in, the top and sink mount, the faucet and shower trim install, and the room gets a final clean and walkthrough. You sign off on the 730-Day Done Right Promise at this stage, which covers workmanship for two full years.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll actually choose between
Most of the cost swing on this job comes from four choices, not from labor. Here’s the honest trade-off on each:
- Vanity material and configuration. A stock KraftMaid or Wellborn cabinet in painted MDF runs less and installs faster; a semi-custom vanity in solid wood with a stone top costs more but holds up better in a humid bathroom. A double-sink vanity needs a wider footprint, which sometimes means relocating a wall.
- Countertop. Cultured marble is the budget option and resists staining well; quartz and Cambria stone cost more but handle heat, scratches, and daily wear better. Stone edges and undermount sinks add to the fabricator’s time.
- Floor and wall tile grade. Porcelain is the workhorse: dense, water-resistant, and available in large formats that read clean. Natural stone looks richer but needs sealing and shows water spots in a damp room. Glass mosaic is beautiful but slower to set and pricier per square foot.
- Fixtures and finish. A basic chrome faucet and standard shower trim get the job done. A thermostatic valve, rain head, or brushed-nickel finish adds cost but is where a lot of homeowners put their upgrade budget. Water-sense-rated fixtures help on a Daly City water bill too.
What Vanities, Tile & Fixtures costs in Daly City, CA
The realistic range for this job in Daly City is $9,000 – $28,000, and the written quote breaks it into line items so you see where every dollar lands. A vanity swap alone sits near $800 – $3,000. Tile and fixtures together are the bulk of the range. Five variables push a job toward the low or high end:
- Size and layout. A small hall bath costs less than a primary bath with a double vanity and walk-in tile shower area.
- Existing condition. Rot, old galvanized lines, or a failed subfloor adds demo and repair time that no one can see until the wall opens.
- Relocating plumbing or electrical. Moving a drain or adding a circuit is a real cost; keeping the layout is not.
- Material grade. Porcelain vs. natural stone and stock vs. semi-custom cabinets swing the number significantly.
- Permit scope. Cosmetic tile and a like-for-like vanity usually need no permit; moving plumbing or structure does.
A written estimate includes demo, substrate prep, tile, setting materials, vanity installation, fixture install, and cleanup. It typically excludes the cost of the vanity and fixtures themselves if you’re supplying them, and any rot repair found after demo, which we quote separately with your approval. Upfront pricing means the number you see is the number you pay for the scope we agreed on.
See the difference
Before
After
Before
After
Before
AfterWhat Daly City homes specifically do to this job
Daly City’s dense rows of post-war stucco-over-wood-frame homes sit on steep, fog-soaked slopes, and that shapes this job down to the millwork. On the hillside streets off Mission and around Westlake, we routinely pull a vanity and find soft subfloor or a rotted wall cavity from decades of wind-driven rain and cool damp air working its way through original single-pane windows and old caulk lines. Bathrooms here stay humid longer than inland, so grout fails faster and sealant needs refreshing more often. Tight lots mean tile deliveries and debris hauling get planned around neighbors’ walls only feet away. Many of the 1940s – 1960s homes in ZIP codes 94015 and 94014 also carry unpermitted prior work we have to sort out before the new vanity goes in. When the moisture damage reaches outside the bath, homeowners often pair this work with Tile Roofing in Daly City or Specialty Roofing in Daly City to close the source.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Vanities, Tile & Fixtures in Daly City
Most Vanities, Tile & Fixtures jobs in Daly City take two to four weeks of active work, with one to two weeks for a vanity-only swap. The tile setting and grout cure are the longest single stage. Call (866) 320-2646 for a schedule built around your dates.
Cosmetic replacement of tile and a like-for-like vanity usually needs no permit; moving plumbing, electrical, or structure does, and we pull it and pass inspection. We handle the paperwork when a permit is required. Call (866) 320-2646 with your plan and we’ll tell you which side of the line it falls on.
Yes, and it’s the most common and least expensive way to do it. Keeping the existing drain and supply locations means no rough-in cost and less demo. If you want a wider double vanity or a relocated sink, we’ll quote the plumbing move separately so you can compare.
Expect $9,000 – $28,000, with the low end for a single vanity and floor tile and the high end for a full bath with stone, custom cabinets, and upgraded fixtures. Call (866) 320-2646 for an exact quote; estimates are free.
Every Vanities, Tile & Fixtures job is backed by the 730-Day Done Right Promise: if the workmanship isn’t right, we make it right for two full years. That covers tile, grout, and installation labor. Call (866) 320-2646 to start your free estimate.
Get a free on-site estimate for Vanities, Tile & Fixtures in Daly City
We’ll come out, measure the space, check the plumbing rough-in, and hand you a written line-item quote with no surprises. Once you’re ready to talk scope, that’s part of a larger Bathroom Remodeling in Daly City project we can scope together, and our Bathroom Remodeling service covers the full picture if you want it. We cover all of Daly City and the surrounding Peninsula. Call (866) 320-2646 to schedule your free estimate.
Written by the team at Groundwork Construction Co.