Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in San Bruno: What You’ll Actually Spend
Replacing a bathroom vanity, tearing out old tile, and hanging new fixtures in San Bruno typically runs $9,000 to $28,000 when the work is grouped into one project, and most jobs finish in two to four weeks once materials land. The range is wide because the job ranges wide: a powder-room vanity swap and a full tile-and-fixtures package are the same week on the calendar but not the same scope. Call (866) 320-2646 for a free on-site estimate and a written line-item quote before you commit to anything.
How We Run a Vanity, Tile, and Fixture Job, Start to Finish
Every job moves through the same five stages. What changes is how much demo and rough-in sits between them. Here’s the sequence we follow, with real durations.
- Day 1 – Walkthrough and protection. We measure the room, confirm what’s staying (often the tub or a load-bearing wall) and what’s coming out, and lay down floor protection and dust barriers. You decide right here whether the layout stays the same or the vanity, toilet, and fixtures get relocated. Moving plumbing is the single biggest fork in the road for cost and timeline.
- Days 2 – 3 – Demo and inspection. Old tile, vanity, and fixtures come out. We open the wall behind the vanity and check for water damage, soft sheathing, and any hidden rot. In San Bruno’s damp marine air this is where surprises live, and you’ll see photos before we quote any add-on. Subfloor and backer board go down next.
- Days 4 – 7 – Rough-in. Plumbing and electrical get moved if your layout changed; a new GFCI outlet near the vanity is standard. If permits are required, this is when the inspection happens. You confirm the vanity placement, mirror height, and lighting plan before the walls close. Most San Bruno jobs that keep the existing layout skip this stage almost entirely.
- Days 8 – 15 – Tile and setting. Waterproofing membrane goes on first, then floor and wall tile. You pick grout color and tile layout at the start of this stage; layout decisions made after the first tile is set cost money to undo. Large-format tile and a level floor take longer than a simple grid.
- Days 16 – 20 – Vanity and fixtures. Vanity goes in, top and sink set, faucet and shower trim installed, toilet reset, mirror and hardware hung. Final walkthrough is yours, and anything on the punch list gets fixed before we call it done.
Plan for the bulk of the decision-making to happen in the first week. Tile, grout, vanity style, and fixture finish all need to be locked before setting begins.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
This job is mostly a materials decision. Here’s what actually moves the outcome.
- Vanity construction: Stock cabinets are the cheapest and fastest but come in fixed sizes that rarely match an older San Bruno bath. Semi-custom fits the space and the budget. Solid-wood or plywood boxes outlast particleboard in a damp bathroom, which matters here.
- Countertop: Quartz and engineered stone handle moisture and stand up to daily use; a natural stone top is beautiful but needs sealing. Laminate is the budget pick and holds up fine if the edges are sealed.
- Tile type: Porcelain is the workhorse – dense, water-resistant, and easy to clean. Ceramic is lighter and cheaper but chips more. Natural stone looks best but needs sealing every year or two, which is real maintenance in a wet room.
- Fixtures: A reputable faucet (Sterling and Grohe both make reliable bath lines) costs more up front and usually outlasts a builder-grade unit by years. Cheap fixtures are the number-one callback item we see.
- Layout: Keeping the toilet, sink, and shower where they are saves the plumbing rough-in cost. Relocating any of them adds labor and possibly a permit.
What Vanities, Tile & Fixtures Cost in San Bruno, CA
Grouped vanity, tile, and fixture work in San Bruno runs $9,000 to $28,000. A focused single-bathroom refresh with a new vanity, floor tile, and fixture swap usually lands near the low end; a package that also re-tiles the shower walls, replaces the toilet, and relocates plumbing lands near the top.
| Line item | Typical range |
|---|---|
| Bathroom vanity installation | $800 – $3,000 |
| Full vanity, tile & fixture package | $9,000 – $28,000 |
| Small bathroom (vanity & fixtures only, no tile) | $5,000 – $12,000 |
The variables that push a job from $9,000 to $28,000:
- Size and count. One hall bath versus a primary with a double vanity doubles material and labor.
- Existing condition. Water damage, rot, or an uneven subfloor adds prep before any tile goes down.
- Moving plumbing or electrical. Relocating a drain or adding a circuit is where budgets stretch.
- Material grade. Porcelain versus natural stone, custom versus stock vanity, premium versus builder fixtures.
- Permit scope. Simple cosmetic swaps usually skip a permit; relocated plumbing or electrical typically requires one.
A written estimate itemizes demo, prep, materials, labor, and permit fees. It doesn’t cover the “while we’re in there” discoveries until you approve them in writing – no surprise change orders. Upfront pricing is the whole point.
See the difference
Before
After
Before
After
Before
AfterWhat San Bruno Homes Specifically Do to This Job
San Bruno sits in the same fog belt that covers the rest of the Peninsula, and that cool onshore air shows up in bathroom walls. Moisture works its way into tile assemblies and old wood sheathing, so we always inspect the substrate before setting new tile – hidden rot behind a shower wall is a common find, not a rare one, on homes built in the 1940s and 1950s. That post-WWII stock makes up a big share of the houses in Crestmoor and the blocks around it, and many of those homes were rebuilt or heavily retrofitted after the 2010 PG&E pipeline explosion. The result is a mix: newer seismic-compliant structures next to older homes still carrying original plumbing, wiring, and floor framing. When we open a vanity wall in San Bruno and find old galvanized supply lines or a floor that’s been patched twice, that’s the rebuild wave showing its edges. A tile-and-fixture job here is as much about reading what’s behind the wall as picking the tile. If your project grows into a wider scope, that’s often where a full Bathroom Remodeling in San Bruno makes more sense than patching room by room. We work all of San Bruno – the 94066 zip and the neighborhoods off Skyline and Sneath Lane – and our San Bruno service page covers what we do across the city.
Serving San Bruno, CA – Our Local Coverage Area
We serve San Bruno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Vanities, Tile & Fixtures in San Bruno
Most bathroom vanity and tile packages run two to four weeks once materials are on site; a vanity-and-fixture swap with no tile can finish in three to five days. Custom vanity lead times and shipping can add a week or two before work even starts. Call (866) 320-2646 to get a real timeline for your room.
Cosmetic work – new tile, a vanity swap, and fixture replacement in the same location – usually doesn’t require a permit, but relocating plumbing or electrical does. We pull permits when the scope calls for it and handle the inspection, and we’ll tell you upfront which category your job falls into. Call (866) 320-2646 and we’ll walk through your scope.
Yes, and most San Bruno jobs we do are exactly that – keeping the toilet, sink, and shower in place saves the rough-in cost and usually keeps the job permit-free. The trade-off is that the new vanity has to fit the existing space, which often means semi-custom rather than stock. Call (866) 320-2646 for a free estimate on a keep-the-layout scope.
Grouped work runs $9,000 to $28,000, with a vanity installation alone in the $800 – $3,000 range and a small no-tile bathroom refresh around $5,000 – $12,000. The top of the range reflects relocated plumbing, premium tile, and a custom vanity. Upfront pricing means the number on the quote is the number you pay. Call (866) 320-2646 for a written line-item estimate.
Every vanity, tile, and fixture job is covered by our 730-Day Done Right Promise – if it isn’t done right, we make it right, one of the longest workmanship guarantees in residential construction. Our technicians bring up to 12 years of experience, arrive background-checked and in uniform, and calls are answered by a live person 24/7. Call (866) 320-2646 to schedule.
If you’re pairing a bathroom update with exterior work, homeowners often pair this with Tile Roofing in San Bruno or Specialty Roofing in San Bruno so the trades line up on the same schedule, and our Bathroom Remodeling service handles the wider scope when a room update grows into a full project.
Get Your Free Estimate
If you’re planning vanities, tile, and fixtures in San Bruno, call (866) 320-2646 to set up a free on-site estimate and design consult. We’ll measure the room, look behind the vanity wall for moisture and rot, and hand you a written line-item quote with upfront pricing – the number you see is the number you pay. Calls are answered by a live person, 24/7. Talk to a real person and get a real number, no obligation.
Written by the team at Groundwork Construction Co.