Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Petaluma, CA: What It Takes
Walk-In Showers & Shower Remodeling in Petaluma typically runs $9,000 – $28,000 for a full project and $4,500 – $12,000 for a straightforward walk-in shower installation, with most jobs finished in two to four weeks. This page covers the shower work specifically: the step-in or curbless base, the waterproofing behind it, the glass and trim, and the plumbing and permit path that gets you there. To price your specific bathroom, call (866) 320-2646 and we’ll set up a free on-site estimate with a written, line-item quote.
How the Work Moves, Stage by Stage
Shower remodels go sideways when the sequence gets compressed. Here’s the order we actually run, and what you decide at each point.
Day 1: Site protection and demo (one to two days)
We mask the hallway, lay floor protection to the front door, and shut off the water at the fixture stops. Demo pulls the old tile, the old pan and any surround material down to the studs. That’s the moment we find out what’s really behind the wall – rotted framing, a pan that was never sloped, or old galvanized lines. You decide nothing on demo day. We photograph everything and send it to you.
Days 2 – 3: Rough-in and framing
Plumbing gets moved or replaced, and we set the drain location to your finished layout. If you’re moving a shower valve, this is when your rough-in inspection gets called if the scope requires one. You approve the valve brand and finish now – Grohe is one we install often – because the rough-in body has to match the trim you’ll want later.
Days 4 – 5: Inspection and waterproofing
Framing and plumbing inspection happens before anything gets closed up. Then the waterproofing system goes in: cement board or a bonded membrane, a pre-sloped pan, and seam treatment. This stage is invisible for the rest of the project’s life, which is exactly why it shouldn’t be rushed. You don’t decide anything here; we do the work and document it.
Days 6 – 9: Tile, base, and fixtures
Tile or solid-surface panels go up. Niche placement, bench, and curb height get finalized. Then the shower valve trim, head, and drain cover install. If you’re pairing this with a floor swap or vanity work as part of a full Bathroom Remodeling in Petaluma, that’s the point where the trades overlap and the schedule tightens or stretches. You choose tile and finish here if you haven’t already.
Days 10 – 14: Glass, cure, and walkthrough
Glass template happens after tile, which means a lead time for tempered panels and hardware. Silicone needs 24 hours to cure before water. We do a final walkthrough with you, run the shower for ten minutes, and check slope and drainage. Most Petaluma showers land inside two to four weeks end to end, but glass lead times are the usual culprit when a job stretches.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Actually Make
Every walk-in shower decision trades cost against how the shower ages. Here’s what’s on the table:
- Base type. A pre-formed acrylic or composite pan is the cheapest and quickest install at the low end of the range. A tiled mud-set or foam pan costs more and takes longer but lets you go curbless and match the floor. Curbless is worth the extra money if there’s an accessibility concern now or in the future.
- Wall material. Porcelain tile is durable and competitively priced; large-format panels cut grout lines and cleaning. Solid-surface panels are faster and seamless but have a distinct look some homeowners don’t want.
- Glass. Frameless tempered glass with a fixed panel and a hinged door runs $1,800 – $3,500 on its own depending on size and hardware finish. Framed glass saves roughly $800 – $1,200 and looks dated faster.
- Valve and trim. A basic pressure-balance valve is standard; a thermostatic valve adds cost but holds temperature better. Grohe trim is a common middle-ground pick.
- Niche and bench. A recessed niche is a small upgrade with outsized daily payoff. A built-in bench adds framing and waterproofing labor; a floating bench costs less but supports less weight.
What Walk-In Showers & Shower Remodeling Costs in Petaluma, CA
Walk-In Showers & Shower Remodeling in Petaluma runs $9,000 – $28,000 as a full project, with a straight walk-in shower install at $4,500 – $12,000. Here’s how the number lands where it does:
| Scope | Typical range |
|---|---|
| Walk-in shower installation | $4,500 – $12,000 |
| Shower replacement (same footprint, new finishes) | $3,000 – $8,500 |
| Full shower remodel with glass and tile upgrade | $9,000 – $28,000 |
Size moves the number first. A 36×60 alcove shower is the baseline; a 48×72 walk-in with a curbless entry adds square footage, waterproofing, and glass.
Existing condition is the wildcard. A pan that failed and rotted framing costs real money to fix before tile goes in. On a Petaluma Victorian with original floor joists, we often find the subfloor needs sistering before we touch the shower.
Plumbing relocation pushes a job toward the high end. Moving the drain six feet or shifting the valve to a wall that doesn’t currently carry water adds rough-in labor and an inspection.
Material grade is the lever you control. Budget tile and a framed door lands near $9,000; large-format porcelain, frameless glass, and a thermostatic valve lands near $28,000.
Permit scope adds cost when plumbing or structural work triggers inspection. Our written estimates itemize the permit line so you know what’s filed and what isn’t. Call (866) 320-2646 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Petaluma Homes Do to This Job
Petaluma’s housing stock splits hard, and that split shows up in shower work. In the Victorian and early-1900s wood-frame homes on the west side and near downtown, shower remodels usually surface the same things: original plumbing lines past their service life, subfloor that’s absorbed years of slow leaks, and walls that have shifted on raised foundations. Those jobs run longer and cost more than the estimate assumes until we open the wall. On the east side, the 1970s-2000s stucco tract homes off McDowell and East Washington tend to have solid plumbing and predictable framing, so a walk-in shower install there usually lands on the lower end of the range and finishes closer to two weeks.
Permits are where Petaluma differs from its neighbors. Shower work that moves plumbing or changes the footprint needs a permit through the city, and if the bathroom sits on a historic home within downtown’s design review corridor, even a window or exterior vent change can add a review cycle that would be a same-day sign-off in another Sonoma County city. We build that time into the schedule rather than promising a date we can’t hold. If your shower project is part of a wider Bathroom Remodeling scope, the permit path gets planned up front.
We cover Petaluma across all four ZIP codes – 94999, 94952, 94953, and 94955 – so scheduling isn’t the constraint. The winter is, sometimes: cool, wet weather and atmospheric-river flooding along the river corridor mean water intrusion and damp sheathing get found during shower demo around this time. That’s a repair conversation, not a surprise. Homeowners weighing the wider roof-and-exterior picture on these older homes sometimes pair this with Roof Replacement & Installation in Petaluma or, for the long-term weather-facing side, Metal Roofing in Petaluma.
Serving Petaluma, CA – Our Local Coverage Area
We serve Petaluma and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Petaluma
Most showers take two to four weeks from demo to final walkthrough. The glass template and lead time is the usual bottleneck. Call (866) 320-2646 to get a schedule estimate for your specific bathroom.
Yes when the scope moves plumbing, changes the footprint, or touches structural framing. A finish-only replacement in the same footprint often doesn’t. We tell you at the estimate which path applies and pull the permit on the jobs that need one, with inspection passed before we close anything up.
Usually yes. If the valve wall and drain location stay within a foot or so of the existing plumbing, the rough-in cost drops and the inspection gets simpler. Bigger moves add labor and permit scope, which is why the range stretches from $4,500 to $12,000.
A walk-in shower installation runs $4,500 – $12,000, and a full shower remodel with upgraded tile and frameless glass lands in the $9,000 – $28,000 band. Call for a written line-item quote – estimates are free.
Every shower we build is covered by the 730-Day Done Right Promise. If something isn’t right in those two years, we come back and make it right. Upfront pricing means the number on the written quote is the number you pay.
Get a Free Walk-In Shower Estimate in Petaluma
Walk-In Showers & Shower Remodeling is a job worth pricing properly before you commit. Call (866) 320-2646 and we’ll schedule a free on-site estimate for your Petaluma bathroom – measurements, a look behind the existing surround, and a written line-item quote with the permit line spelled out. Calls are answered by a live person around the clock. Our technicians have up to 12 years of experience on shower and tile work.
Written by the team at Groundwork Construction Co..