Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in San Bruno, CA: What It Costs and What You Get
Expect to pay $3,500 to $9,000 for a wood fence in San Bruno, with most residential jobs landing somewhere around $4,000 to $6,500 for a standard side-yard run and climbing toward the top of that range for full-perimeter privacy fencing with a gate. A typical job runs two to four working days from demo to cleanup. Call (866) 320-2646 and we’ll set up a free on-site estimate so you’re pricing your actual yard, not a ballpark.
How We Build a Wood Fence Here, Stage by Stage
The sequence matters more than the sales pitch, so here’s exactly what happens and when you’ll be asked to make a decision.
Stage 1: Site walk and layout (day 1, about an hour)
We walk the property line with you, confirm the fence height (6 feet is standard for backyard privacy, 3 to 4 feet for front-yard runs where the view counts), and set the post spacing. This is where you decide where the gate lands and whether it swings in or out. We also flag anything buried, and this is where San Bruno’s PG&E gas line rules come in. Before any post hole gets dug, 811 utility marking is required and clearance procedures apply. That isn’t a formality in a city with San Bruno’s pipeline history – it affects how close to the line the crew can work and whether a run gets shifted.
Stage 2: Demo and removal (day 1, half to a full day)
Old fencing comes down, posts get pulled, and debris gets hauled off in the same visit. We ask homeowners to clear planters, hoses, and anything leaning against the fence before we arrive so the crew isn’t handling your belongings. If the existing fence borders a neighbor’s property, the line itself stays the same, but we document the shared-boundary condition before anything moves.
Stage 3: Post setting (day 1 into day 2, the slow part)
Posts get set in concrete, and this is the single most important step for how long the fence lasts. We set them roughly 24 to 30 inches deep with gravel at the bottom for drainage. The concrete needs 24 to 48 hours to cure before rails and pickets go up, which is the one stage you can’t rush. You’ll decide on post caps here (flat or pyramid – flat sheds water better).
Stage 4: Rails, pickets, and gate (day 2 to day 3)
Rails go on, then pickets. For a 60-foot run with a single gate, plan on one full day of picket work. You pick the picket profile (dog-ear, flat-top, or French Gothic), the board width (most go with 5/8-inch-thick boards; 1-inch is the upgrade), and the gate hardware – self-closing hinges and a latch rated for wind are worth the extra cost on a coastal property.
Stage 5: Sealing and final walk (day 3 to 4)
We seal or stain after the wood is clean and dry, then walk the whole line with you. The 730-Day Done Right Promise covers the workmanship – if a post settles or a gate sags, we fix it. Most jobs wrap in a single visit once the concrete has cured.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Wood fence isn’t one product, it’s a stack of choices. Here’s what actually moves the price and how the materials hold up in San Bruno’s marine layer.
- Cedar vs. pressure-treated pine. Cedar naturally resists rot and insects and holds stain well – it’s the better long-term pick in a fog belt and costs roughly 20 to 30 percent more than pine. Pressure-treated pine is the budget option; it’s chemically protected but can warp and check faster in wet coastal air.
- Board thickness. 5/8-inch pickets are the standard residential spec. 1-inch boards cost more up front but last noticeably longer and look more solid from the street.
- Picket style. Dog-ear, flat-top, or French Gothic. Pure aesthetic, but flat-top sheds water better and holds up longer than a scalloped or dog-ear profile.
- Post base and cap. Pressure-treated posts set in concrete are standard. Steel post anchors cost more but keep wood out of direct ground contact, which matters more in a fog belt than almost anywhere.
- Gate hardware. A lightweight residential latch runs a fraction of the cost. A self-closing hinge plus a wind-rated latch adds real lifespan on a property where the onshore breeze pushes hard.
- Sealing vs. staining. A clear sealer every two to three years protects the wood. A stained finish costs a little more but looks better longer and hides weathering.
What a Wood Fence Costs in San Bruno, CA
Most wood fence jobs in San Bruno land between $3,500 and $9,000, and the written estimate tells you exactly where yours falls before anyone swings a hammer.
| Line item | Typical range |
|---|---|
| Standard 6-foot cedar privacy fence, 60-80 linear feet | $3,500 – $5,500 |
| Pressure-treated pine, same run | $2,800 – $4,500 |
| Full-perimeter privacy fence, 120-150 linear feet | $6,000 – $9,000 |
| Single gate with premium hardware | $400 – $900 |
| Staining or sealing | $300 – $800 |
| Old fence removal and haul-off | $300 – $700 |
What pushes a job to the high end: total linear footage, a sloped lot that requires stepped panels, cedar or 1-inch boards instead of pine, two or more gates, and shared-boundary negotiations that add a week of scheduling. What pulls it down: shorter runs, pine, no demo, and no staining. A written estimate lists posts, rails, pickets, concrete, hardware, gate, removal, and haul-off line by line. What it doesn’t usually include: permit fees if your run triggers one, stump removal or major ground work, and planting or landscaping restoration along the fenceline.
See the difference
Before
After
Before
After
Before
AfterWhat San Bruno Homes Specifically Do to This Job
San Bruno’s housing stock shapes fence work in ways you won’t see in most Peninsula cities. The Crestmoor neighborhood and surrounding streets are dominated by post-WWII single-family homes, many built in the 1940s and 50s. The 2010 PG&E gas pipeline explosion led to a mandatory seismic retrofit and rebuilding wave across Crestmoor, and that history is still baked into every permit this city pulls. A large share of Crestmoor homes were rebuilt or extensively retrofitted after 2010 and sit next to older homes that still need foundation bolting and shear walling – which means when we set fence posts near a rebuilt Crestmoor lot, we’re often working around newer utilities and a stricter inspection standard than you’d find a mile away in Daly City or Pacifica.
The marine layer is the other reality. Cool, damp summers and steady onshore wind from the Pacific push moisture into exterior wood, and a fence that wasn’t detailed right will show rot at the post base and rail connections within a few seasons. Every post hole we set here is gravel-bedded for drainage and every rail is flashed where it meets a post. That’s not over-engineering – it’s the minimum for wood fence in San Bruno’s fog belt.
Serving San Bruno, CA – Our Local Coverage Area
We serve San Bruno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Wood Fence in San Bruno
Most residential wood fence jobs in San Bruno take two to four working days from demolition to final walk. The concrete cure on the posts is the hard stop – 24 to 48 hours – and everything else can usually compress into the surrounding days. Call (866) 320-2646 and we’ll give you a specific timeline for your yard.
Fences at or under the city’s standard residential height limit usually don’t require a building permit, but any run over that limit, or one on a corner lot with sight-distance rules, does. We check your specific property before scheduling and pull the permit if one is needed. Call (866) 320-2646 to confirm your run.
Standard post spacing almost never hits plumbing or irrigation, but we check before digging and 811 utility marking is required on any job. Landscaping along the run gets protected with plywood, and we ask you to move planters and hoses before we arrive. Call (866) 320-2646 if you have a buried system you’re worried about.
$3,500 to $9,000 covers nearly every residential job in San Bruno, with a standard side-yard run landing near $4,000 to $6,500. The variable that matters most is linear footage – a full-perimeter run costs roughly double a single side. Call (866) 320-2646 for an exact quote; estimates are free.
The 730-Day Done Right Promise covers workmanship on every wood fence we install, and if a post settles or a gate binds we come back and fix it. Materials carry their own manufacturer coverage. Call (866) 320-2646 to schedule your free estimate and see exactly what’s covered in writing.
If your wood fence is part of a full Fence Installation in San Bruno project that includes a front-yard run or new gate, we scope both together. For homeowners who want to see the wider Fence Installation picture, that page covers the other fence types we run. We work throughout San Bruno, and this kind of exterior work often pairs with Paver Driveways in San Bruno or Concrete Driveways & Concrete Work in San Bruno when the front of the house is getting a full reset.
Call for a Free Wood Fence Estimate in San Bruno
Call (866) 320-2646 to schedule a free on-site estimate for your wood fence. We walk the property line with you, talk through cedar versus pine and gate placement, and put a line-item number in front of you before you commit to anything. Upfront pricing, no surprises, and the 730-Day Done Right Promise standing behind the work.
Written by the team at Groundwork Construction Co.