Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Trusted Driveway & Pavers for San Francisco Homeowners
San Francisco driveways take a beating that most of the country never throws at them. Fog rolls in off the Pacific, saturates the concrete, then the sun burns it off by noon. Hillside lots in Noe Valley and Bernal Heights shed water fast, and that runoff finds every hairline crack in an old slab. We build driveways and paver surfaces that handle that cycle instead of surrendering to it. Our technicians have up to 12 years of experience with pavers, concrete, and asphalt across the city’s microclimates, and we show up ready to talk straight about what your surface actually needs. Calls are answered by a live person 24/7 at (866) 320-2646.
What Our Driveway & Pavers Service Includes
Paver Driveways
Paver driveways are individual stone or concrete units set on a compacted base and sand joint, which lets the surface flex with ground movement instead of cracking like a poured slab. They’re the right call on San Francisco lots with mature tree roots, shifting fill soil, or a slope steep enough that a rigid pour would eventually split. We excavate to the depth your soil demands, set a geotextile separation layer, compact the base in lifts, and cut edge restraints so the field holds its line for years.

Concrete Driveways & Concrete Work
A poured concrete driveway is the most economical hard surface for a flat or gently graded approach, and it’s what most Sunset and Richmond District homes were built with. You need it when the old slab has cracked through, settled into a hollow, or turned into a patchwork of previous repairs. We pour with air-entrained mix suited to damp coastal air, control joints placed where the slab actually wants to move, and proper slope away from the garage so water stops pooling at the door.

Asphalt Driveways & Resurfacing
Asphalt gives you a smooth, quiet surface at a lower upfront cost, and it’s a practical fit for longer driveways and shared approaches. Resurfacing makes sense when the base is still sound but the top layer has oxidized, raveled, or lost its aggregate. We mill or clean the existing surface, tackle the cracks and soft spots first, then lay a new wearing course with compaction checked as we go, so the overlay bonds instead of peeling off in sheets.

Driveway Repair & Replacement
Not every failing driveway needs to be torn out, and we’ll tell you when a repair is the smarter spend. Cracking, spalling, sunken panels, and broken aprons can often be cut out and rebuilt to match the surrounding surface. When the damage runs through the base or the slope has failed entirely, replacement is the honest answer, and we’ll show you the reason on site rather than talk you into a new pour.
Patios, Walkways & Pool Decks
The same materials and methods that hold up a driveway work for the surfaces you walk and gather on. Paver patios, front walkways, and pool decks all live outdoors in the same fog-and-sun swing, so they need the same base preparation and drainage planning. We lay patios and walkways that tie into your home’s architecture, with edge restraint and grading that keep water moving away from the foundation.
Brick Paver Driveway
Brick pavers bring a warmth and permanence that poured surfaces can’t match, and they suit the older Victorians and Edwardians that define so much of San Francisco’s housing stock. Real clay brick holds color and resists the salt air better than many manufactured units. We set brick on a properly compacted base with tight joint lines and a pattern that matches the character of your block, not a catalog default.
Stamped Concrete Driveway
Stamped concrete gives you the look of stone or brick at the cost of a concrete pour, and it’s a popular choice for homeowners who want visual interest without the unit-by-unit installation of pavers. The pattern is pressed into the surface before it cures, then sealed and colored to your choice. We pour and stamp in the same visit where conditions allow, so the imprint stays crisp and the color takes evenly.
Driveway Sealing
Sealing is the cheapest way to extend the life of a surface you’ve already paid for, and it’s easy to skip until the damage is done. A seal coat blocks moisture intrusion, slows freeze-thaw and salt damage, and keeps the finish looking new. We clean and prep the surface first, because sealing over dirt or a damp slab just traps problems underneath.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Brands We Service for Driveway & Pavers
We work with Belgard pavers regularly, and we know how their different product lines behave under the weight of a vehicle versus a foot-traffic patio. The base detail matters more with interlocking units than with a slab, and Belgard’s dimensional tolerances reward a crew that lays them tight and true. If your project calls for a hardscape brand not on our short list, we’ll spec the right material and explain the trade-offs before you commit a dollar.
When a driveway or patio meets the house, the transition details matter as much as the pavers themselves. We pair our hardscape work with siding from James Hardie where a new surface changes how water hits the wall, so the whole assembly drains correctly and looks finished. Whether you want Belgard, a clay brick, a stamped pattern, or something else entirely, we can help you land on the right surface for your lot and your budget.
Signs You Need Driveway & Pavers Right Now
- Cracks wider than a quarter inch. Hairline cracks are normal settling, but when a crack opens wide enough to catch a coin, water is getting into the base and freezing or swelling it. That’s how a small crack becomes a broken panel within a season or two.
- Ponding water after rain. If water stands on the surface for hours, the slope has failed and the surface isn’t draining. On a San Francisco hillside lot, that standing water also finds its way toward the garage or foundation, which turns a paving job into a water problem.
- Sunken or heaved panels. A section that dips below the rest or lifts at the edge usually means the base underneath has washed out or the soil has shifted. It’s a trip hazard and a sign the sub-base needs attention, not just a cosmetic patch.
- Loose, shifting, or missing pavers. When individual pavers rock underfoot or the joints have washed out, the edge restraint or base has failed. Driving over a loose field spreads the damage fast, so it’s worth diagnosing before more units work free.
- Surface raveling or alligator cracking on asphalt. A rough, crumbly top layer or a web of interconnected cracks means the asphalt has aged out or the base is failing. A seal or overlay can rescue it if caught early; left alone, it needs full replacement.
Our Driveway & Pavers Process – Step by Step
- 1
On-site assessment and written estimate. We walk the surface with you, probe the base where it matters, check the slope with a level, and look at how water leaves the property. You get no-hassle upfront pricing in writing, so the number you see is the number you pay, with no change-order surprises later.
- 2
Material and design selection. We help you choose between pavers, concrete, asphalt, and stamped finishes based on your budget, the grade of your lot, and how the surface needs to perform. You’ll see samples and understand the cost difference before anything is ordered.
- 3
Site prep and base work. The surface you see is only as good as the base under it. We excavate to depth, compact in controlled lifts, set separation fabric and edge restraints, and confirm drainage falls away from the structure. This is the step cheap jobs skip, and it’s the step that decides whether the job lasts.
- 4
Installation and finishing. We place, pour, or pave to the agreed pattern and grade, cut joints and control lines where the surface needs to move, and clean up the site as we go. Background-checked, uniformed technicians handle every project, and we keep you posted on progress.
- 5
Final walkthrough and handoff. We walk the finished surface with you, check drainage and edges, and explain the care and sealing schedule. Every project is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right.
See the difference
Before
After
Before
After
Before
AfterHow Much Does Driveway & Pavers Cost in San Francisco?
A typical paver driveway installation in San Francisco runs $8,260 – $21,240 depending on square footage, base depth, and the paver line you choose. A concrete driveway installation lands around $5,310 – $14,160, while asphalt driveway paving runs $4,130 – $10,620. If the whole surface has to come out and start over, driveway replacement runs $5,900 – $16,520. Sealing is the low-cost maintenance item at $295 – $825, and a paver patio installation typically runs $4,130 – $12,980.
Several things move the number. Steep lots need more excavation and retaining detail than flat ones. Mature tree roots, old utility lines, and tight access on a narrow city street all add labor. The material you pick matters too: a standard concrete pour sits at the low end, while clay brick or premium pavers sit at the top.
You avoid overpaying by getting a written line-item quote that separates base prep, materials, and labor, so you can see what you’re actually buying. Our free estimate includes the site assessment and a clear scope with no hidden add-ons. Projects over $10,000 qualify for $1,000 off, and 0% financing for 18 months is available to spread the cost. Call (866) 320-2646 for an exact quote.
Driveway & Pavers Near San Francisco – Our Service Area
We serve homeowners across San Francisco and the surrounding Peninsula and North Bay communities, including Daly City, San Bruno, Pacifica, Half Moon Bay, Mill Valley, Corte Madera, Larkspur, San Rafael, San Anselmo, Tiburon, and Tamalpais-Homestead Valley. Scheduling is straightforward: call and we’ll set a free estimate at a time that works for you. You can also explore our Driveway & Pavers in Daly City and Driveway & Pavers in Tiburon pages for nearby projects, or return to our home page to see the full range of services.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions – Driveway & Pavers in San Francisco
Driveway and pavers work covers the full surface from the street apron to the garage door, plus associated patios, walkways, and pool decks. That means excavation, base preparation, drainage grading, the surface material itself, edge restraint, and sealing where it applies. We handle the whole scope from foundation to finish line, so you deal with one contractor instead of coordinating a paver crew, a concrete pour, and a drain guy.
Most residential driveway projects run two to five days once work begins, depending on square footage and material. A straightforward concrete pour can finish faster, while a large paver installation with deep base work or a steep grade takes longer. Weather matters in San Francisco: fog and damp don’t stop most work, but a stretch of real rain can push a pour or a seal coat back. We give you a realistic timeline in the written estimate.
Cost depends on the material and the size of the surface. Paver driveways typically run $8,260 – $21,240, concrete driveways $5,310 – $14,160, and asphalt $4,130 – $10,620. Driveway replacement runs $5,900 – $16,520, sealing $295 – $825, and paver patios $4,130 – $12,980. Call (866) 320-2646 for a free written estimate based on your actual site; estimates are free and there’s no obligation.
Yes, we work with Belgard pavers regularly and know how their different product lines perform under vehicle traffic versus foot traffic. We also install clay brick, stamped concrete, poured concrete, and asphalt, so you’re not locked into one material. If you have a specific brand in mind, tell us during the estimate and we’ll confirm what fits your project.
We don’t promise same-day emergency dispatch for paving work, because a driveway or patio is a planned project, not a crisis call. What we do offer is a live person answering the phone 24/7 at (866) 320-2646, so you can reach us any time to report a problem or schedule an estimate. If a surface has failed and created a safety hazard, call and we’ll talk through the situation and get you on the schedule as soon as we can.
Every driveway and paver project we complete is covered by our 730-Day Done Right Promise. If something isn’t done right, we make it right, and that commitment stands for the full term. That’s built to last, backed in writing, and it’s one of the longest workmanship guarantees in the residential construction space. Ask us to walk you through the coverage during your estimate.
Clear vehicles, trash bins, and anything else off the work area before we arrive, and let us know about any irrigation lines, utility stubs, or gate codes on site. If you have an HOA or a shared driveway with neighbors, sort out access ahead of time. Beyond that, you don’t need to do much: we handle demolition, hauling, and cleanup. Call (866) 320-2646 to set up your free estimate and we’ll confirm the details for your property.
Schedule Your Driveway & Pavers Service in San Francisco Today
Ready to make your driveway, patio, or walkway a surface you don’t have to think about? Call Groundwork Construction Co. of San Francisco at (866) 320-2646 for a free project estimate and design consult. We’ll assess your site, give you no-hassle upfront pricing in writing, and back the work with our 730-Day Done Right Promise. No obligation, no pressure, just straight answers.
Written by the team at Groundwork Construction Co.