Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Backsplash, Tile & Flooring in San Francisco: What It Costs and How Long It Takes
Backsplash, tile & flooring work in San Francisco usually runs $16,520 to $53,100 for a kitchen-scope tile and flooring package, with a backsplash alone landing between $945 and $2,950. A standard backsplash takes two to three days from demo to grout; a full tile floor adds three to five more. Call (866) 320-2646 and we’ll walk your kitchen or bath and put real numbers on paper.
How the Job Actually Runs, Day by Day
Tile work fails or lasts on what happens before the first piece goes down. Here’s the sequence we hold to.
1. Walkthrough and substrate check (day 1, about an hour on site)
We measure every wall and floor plane, then check what’s behind the existing finish. In San Francisco’s older row houses that’s often drywall over furring strips, sometimes plaster over lath, occasionally tile glued straight to drywall with mastic. The substrate decides whether we can tile over or have to strip back. You get a written line-item quote before anything is ordered.
2. Demo and prep (day 1 – 2)
Out comes the old backsplash, the damaged drywall, the cracked floor tile. Then we set cement backer board on the floor, flat and screwed tight, and skim and square the walls behind the backsplash. This is the slow part and the part nobody wants to pay for, but a wavy wall will telegraph every tile that goes on it. You approve grout color and layout here.
3. Layout and dry-fit (day 2)
We snap lines and dry-lay the first courses so cuts land where you won’t stare at them. On a backsplash that means centering the layout on the range or sink, not on the wall. You sign off on the pattern before adhesive goes down.
4. Setting and grouting (day 3 – 4)
Thinset, tile, spacers, cure overnight, then grout and seal. Floor tile gets a membrane under it where the subfloor moves, backsplash tile gets a matching caulk bead at the counter joint instead of grout so it can flex.
5. Final walk and clean (last day)
We check every edge, every cut around an outlet, every joint at the counter. Then we clean up and walk it with you. The 730-Day Done Right Promise covers the workmanship from that day forward.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
What You’ll Choose Between
Most of our San Francisco clients land on one of these. The honest trade-offs:
- Ceramic vs. porcelain backsplash. Ceramic is the budget choice ($945 – $1,600 installed) and easy to cut around outlets. Porcelain runs $1,300 – $2,300, shrugs off moisture better in a foggy kitchen, and takes a cleaner grout line. Neither cracks from normal use.
- Large-format slab vs. standard tile. A single slab backsplash ($2,200 – $2,950) means almost no grout to clean. It costs more, needs a fabricator, and can’t be tweaked if your wall isn’t flat. Worth it if you hate scrubbing grout.
- Subway vs. patterned tile. Classic 3×6 subway is the cheapest labor per square foot. Hex, herringbone, and zellige take more cutting and set time, so labor climbs 20 – 40% over subway of the same material.
- Luxury vinyl plank vs. porcelain floor tile. LVP ($4 – $8/sq ft installed) is warm underfoot, quiet, and forgives a moving subfloor. Porcelain tile ($9 – $18/sq ft) lasts decades and handles wet zones better. In a kitchen with a dishwasher leak history, tile is the safer floor.
- Cambria quartz counter edges and matching backsplash. If you’re also replacing the counter, a slab-matched backsplash in Cambria keeps the kitchen visually quiet and the joint detail crisp. KraftMaid and Wellborn cabinetry pair cleanly with it if the cabinets are part of the same job.
What Backsplash, Tile & Flooring Costs in San Francisco, CA
A full kitchen-scope tile and flooring project in San Francisco typically runs $16,520 to $53,100. A backsplash alone is $945 to $2,950, and a floor-only tile job sits in the middle of that range.
Five things push a job toward the high end:
- Square footage and layout. A galley kitchen with 40 linear feet of backsplash costs less than an open-plan kitchen with a peninsula and island face to tile.
- What’s behind the old tile. Drywall-over-furring strips is quick to strip. Plaster over lath adds demo hours, and rotten furring behind a wet wall means replacing framing first.
- Moving outlets or plumbing. Relocating a receptacle to center it over the counter or moving a supply line for a new sink adds electrician or plumber time and a permit line.
- Material grade. Builder-grade ceramic backsplash tile runs a few dollars a square foot. Imported slab, zellige, or large-format porcelain can multiply that.
- Substrate repair. Old mud-set floors, cracked subfloor, or a floor out of level from a century of settling adds prep days.
Your written estimate lists tile, setting materials, substrate prep, labor, and cleanup as separate lines. It does not include moving gas or electrical, structural repair, or replacing the counter – those get priced separately once we see what’s underneath.
See the difference
Before
After
Before
After
Before
AfterWhat San Francisco Homes Do to This Job
Working tile in San Francisco means working inside a 1900s wood-frame row house that has settled, shifted, and had three generations of half-finished updates. In the Mission and Bernal Heights we regularly pull a backsplash and find drywall screwed over a plaster wall that was never skimmed flat – which is why the first day of prep often matters more than the tile itself. Out toward the Outer Sunset and Richmond, the fog belt and salt air from the Pacific eat at steel and grout fast, so we spec stainless fasteners and sealed grout on anything near a window. Soft-story retrofit work on older multifamily stock also changes the framing we can attach a floor to, and hillside lots mean a floor that looks level isn’t. That combination of pre-1906 stock and post-1906 rebuild means no two kitchens meet the same substrate.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Backsplash, Tile & Flooring in San Francisco
A backsplash takes two to three days. Add three to five days for a tile floor, and plan around two weeks if the substrate needs repair. Call (866) 320-2646 for a timeline on your specific kitchen.
Cosmetic tile on walls and floors over an existing substrate generally does not need a permit. Electrical or plumbing changes behind the tile usually do, and older homes may trigger a permit when the inspector sees other work. We pull what’s required and pass inspection before closing up.
Yes. If the counter and cabinets stay, we demo the old tile, repair the drywall behind it, and set new tile down to the counter with a flexible caulk bead. The counter stays in place. If you’re considering a bigger scope, see our Kitchen Remodeling in San Francisco page for what that involves.
Backsplash installation runs $945 to $2,950 installed, depending on tile grade, square footage, and how much substrate repair is needed. Call (866) 320-2646 for an exact quote – the estimate is free.
Our workmanship is covered by the 730-Day Done Right Promise. If a tile comes loose or grout fails, we make it right. Talk to us about your project and we’ll answer your questions directly.
Get a Free Estimate on Backsplash, Tile & Flooring in San Francisco
Call (866) 320-2646 to schedule a free on-site estimate. We’ll measure, look at what’s behind the existing tile, and give you a written line-item quote with upfront pricing – no surprises. Every job is backed by the 730-Day Done Right Promise, and our technicians bring up to 12 years of experience to the work. If your project grows into more, our Kitchen Remodeling service covers the full scope, and homeowners often pair a tile refresh with Tub-to-Shower Conversion in San Francisco or Vanities, Tile & Fixtures in San Francisco. We work across San Francisco and nearby Daly City, Tiburon, San Bruno, and Tamalpais-Homestead Valley.
Written by the team at Groundwork Construction Co..