Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Tub-to-Shower Conversion in San Francisco: What It Takes and What It Costs
A tub-to-shower conversion in San Francisco runs $4,130 to $11,800, and most jobs are finished in 5 to 10 working days once permits clear. The work means pulling the old tub and its surround, reworking the drain and valve to a shower configuration, waterproofing the walls and floor, then setting a new pan, tile, and glass. Call (866) 320-2646 for a free on-site estimate with a written line-item quote.
How a Tub-to-Shower Conversion Actually Runs, Stage by Stage
People ask what happens on day one versus day five, so here’s the honest sequence. Timelines below assume a straightforward swap in a hall or primary bath with no hidden rot behind the tile.
- Stage 1: Site protection and demolition (1 day). We lay floor protection, shut off water, and pull the tub, surround, and any old backer. This is where surprises surface: soft subfloor, corroded drain fittings, or dry rot in the wall cavity from a slow leak. You decide nothing here except whether to approve a repair the estimate didn’t anticipate.
- Stage 2: Rough plumbing and framing (1-2 days). The drain gets moved from the tub position to the center of the shower footprint, the valve is reset to shower height, and framing is squared up. If you’re relocating the shower head or adding a bench, this is the last moment to change the layout. A rough inspection usually happens at the end of this stage.
- Stage 3: Waterproofing and pan (1-2 days). We build a sloped pan (site-built mud or a bonded membrane system) and coat the walls. This stage is invisible when it’s done and it’s the whole ballgame on whether the job lasts. You confirm the drain location and any niche placement here.
- Stage 4: Tile and finishes (2-3 days). Wall tile, floor tile, grout, then a cure window. Grout and sealant need to set before glass goes on, so there’s a short pause that surprises people. You finalize fixture finishes and glass style with your selections locked in by now.
- Stage 5: Glass, trim, and final inspection (1-2 days). Frameless or framed enclosure goes in, the trim kit and shower head are set, and we walk the job with you. Any punch-list items get handled before final inspection signs off.
Across San Francisco, the variable that most often stretches a week-long job is what demo uncovers, not the finish work. A pre-1940s row house with a 1970s tile-over-tile job behind it can add two days of careful removal.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
- Pan type: acrylic vs. tile. A pre-formed acrylic pan runs lower and cleans easily, but shows scratches. A tile-and-membrane pan costs more and needs a skilled setter, yet it suits the period look of an Edwardian bath and can be built to an odd footprint. Most of our San Francisco clients on older stock choose tile for exactly that reason.
- Wall finish: porcelain, ceramic, or large-format slab. Standard ceramic is the budget pick; porcelain holds up better in a damp climate. Large-format panels cut grout lines but demand a flatter substrate, which adds prep cost.
- Glass: frameless vs. semi-framed. Frameless glass looks sharp and opens the room, but it’s a bigger line item and unforgiving of a slightly out-of-square opening. Semi-framed is more forgiving in an old house where nothing is plumb.
- Fixtures: pressure-balance vs. thermostatic valve. A pressure-balance valve is standard and reliable; a thermostatic valve adds precise temperature control and cost. Brands like Kohler sit in the reliable middle.
- Drain style: center vs. linear. A linear drain lets you use larger floor tile and gives a cleaner slope, but it costs more and the pan build is fussier.
What Tub-to-Shower Conversion Costs in San Francisco, CA
Expect $4,130 to $11,800 for a tub-to-shower conversion in San Francisco. A simple acrylic pan with ceramic walls and a framed door sits near the bottom; a custom tile pan, large-format walls, frameless glass, and relocating the valve push it toward the top.
Four things move that number:
- Size and layout. A standard 30-by-60 alcove is the cheapest footprint. A wider or oddly shaped bath means custom pan work and more tile.
- Plumbing and electrical moves. Keeping the drain roughly where it is saves money. Moving the drain across the room or adding a niche light or fan changes the rough-in scope and the permit.
- What demo uncovers. Rotted framing, failed subfloor, or a bad prior waterproofing job add repair cost that no honest estimate can predict until the wall is open.
- Material grade. Acrylic versus porcelain versus slab, framed versus frameless glass: each step up is a real line item, not marketing.
A written estimate should spell out demo, rough plumbing, waterproofing, tile, glass, fixtures, permits, and haul-away. It should also flag that unforeseen structural or rot repairs are quoted separately before we proceed. If you’re wrapping this into a larger job, it often makes sense to fold it into Bathroom Remodeling in San Francisco so one permit and one crew cover the whole scope.
See the difference
Before
After
Before
After
Before
AfterWhat San Francisco Homes Do to This Job
San Francisco is dense hillside housing built beside one of the most historic urban cores in the country, and that shapes a bathroom conversion more than people expect. Much of the west-side Victorian and Edwardian wood-frame row house stock sits on brick foundations with the bath tucked into tight, irregular footprints. The marine fog and salt air off the Pacific accelerate rot and corrosion, so when we open a wall we frequently find soft framing and corroded drain fittings that a dry-climate job would never see. On the foggy west side we spec stainless hardware and galvanized fasteners even on small bath jobs, because standard fittings don’t hold.
Permitting matters here too. Major plumbing relocation and waterproofing typically require a permit and inspection, and a soft-story retrofit or structural work in one of these old row houses can trigger a longer planning review. We pull the permits and handle inspections, and we account for that timeline in the schedule rather than pretending it doesn’t exist.
If your project grows into structural or exterior work, homeowners often pair this with Metal Roofing in San Francisco or Tile Roofing in San Francisco while the scaffolding is up. For the wider scope, see our Bathroom Remodeling service, and check the neighborhoods we cover on the San Francisco service-area page.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Tub-to-Shower Conversion in San Francisco
Most run 5 to 10 working days once permits clear, with the permit and any inspection adding time before that. Hidden rot or a plumbing relocation can push it longer. Call (866) 320-2646 and we’ll give you a realistic schedule for your specific bath.
Usually yes, because the drain and valve are typically reworked and that plumbing is inspected. Small changes that keep the drain in place can sometimes avoid a full permit, and we’ll tell you which applies after we see the layout. We pull the permits and pass the inspections as part of the job.
Often yes, and that’s the cheaper route. If the drain can sit close to where the tub drained, you skip a rough-in move and save cost. When the layout forces a move, we plan it and permit it properly rather than cutting corners.
Between $4,130 and $11,800, depending on pan type, tile grade, glass, and whether plumbing has to move. Call (866) 320-2646 for a written line-item quote, and estimates are free.
Every job is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. Our technicians have up to 12 years of experience, and pricing is set upfront so the number you see is the number you pay.
Get a Free Tub-to-Shower Conversion Estimate in San Francisco
Call (866) 320-2646 to schedule a free on-site estimate for your tub-to-shower conversion in San Francisco. We’ll measure the alcove, check the drain and valve setup, talk through pan and glass options, and leave you with a written line-item quote and a realistic schedule. A live person answers, 24/7.
Written by the team at Groundwork Construction Co.