Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in San Francisco, CA: What It Costs and How It’s Built Here
A wrought iron fence in San Francisco, CA typically costs $4,130 to $10,620 for a standard residential run, and most projects take 2 to 4 weeks from contract to final walkthrough. You’re choosing between fabricated steel panels and true wrought iron, painted or powder-coated, anchored into concrete footings on a lot that may be flat, sloped, or sitting on a hillside with a century-old brick foundation. Call (866) 320-2646 for a free on-site estimate in San Francisco and a written line-item quote before any work begins.
How an Iron Fence Goes In: Stage by Stage
Iron fencing looks simple from the sidewalk. It isn’t, especially in San Francisco, where grade changes, tight side yards, and older retaining walls change the plan in the first hour of a site visit. Here’s the sequence we actually follow.
Stage 1: Site measurement and layout (day 1, roughly 2 hours)
We walk the property line, check the elevation at each post location, and identify what’s underground, whether that means a sprinkler line, a sewer lateral, or an old brick foundation footing from an earlier structure. On steep lots we note where grade climbs or drops, because that determines whether you need stepped panels or racked panels that follow the slope. You’ll confirm the fence height and gate placement at the end of this visit.
Stage 2: Removal and prep (days 2-3)
If there’s an existing fence, we take it out and haul it off. Post holes get dug to frost-line depth, which in San Francisco’s mild climate is shallower than inland California, but we still set footings below grade to hold against wind and soil movement. On hillside lots we may need to shore up or work around an existing retaining wall, and that’s a conversation we have before demolition, not after.
Stage 3: Footings and curing (days 3-5)
Concrete goes into each post hole and cures for 24 to 48 hours before any weight goes on it. This is the stage where shortcuts show up five years later as leaning posts or cracked welds. You’ll decide at this point whether you want gate posts oversized for a heavier gate, which adds cost but prevents sag on a driveway gate.
Stage 4: Panel installation (days 6-8)
We set the posts, hang the panels, and install the gates. Iron fencing is heavy, so this is a two or three-person job. On a sloped San Francisco lot, expect the crew to spend extra time leveling gate hardware and checking that a gate clears the grade without dragging. You choose your hardware finish before this stage, and once it’s ordered there’s no swapping.
Stage 5: Finishing and final walkthrough (days 9-12)
Touch-up paint on any field welds or scratches, hardware adjustment, and a walkthrough with you to check latch alignment, gate swing, and finish quality. If a permit was pulled, we schedule the inspection and meet the inspector on site. The full job typically wraps within 2 to 4 weeks depending on panel lead time and inspection scheduling.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Wrought Iron, Fabricated Steel, or Aluminum: Choosing What Goes In the Ground
The word “iron fence” covers three very different products, and the choice drives both the price and how long the fence lasts in San Francisco’s salt air.
- True wrought iron: Hand-forged, dense, and heavy. It lasts decades and holds detail well. It’s the highest-cost option and has the longest lead time because fewer fabricators make it. Best for historic homes where the fence needs to look period-appropriate.
- Fabricated steel: The most common choice for residential iron fencing today. Tubular or solid steel, welded or assembled, available in more patterns than wrought iron. Costs less than true wrought iron and lasts just as long if the finish holds up. Good balance of durability and price.
- Aluminum iron-look: Lighter, rust-resistant, and typically the least expensive option. It won’t corrode in coastal air the way steel can if the paint fails, but it dents where steel would bend back. Fits areas with lighter security needs and homeowners who want the look without the weight.
- Finish: Powder coating is more durable than field-applied paint in San Francisco’s fog belt. On west-side properties, we recommend a galvanized substrate under the powder coat to resist salt corrosion.
- Height and spacing: 48-inch panels are standard for security. 36-inch is common for front-yard boundaries. Bar spacing of 4 to 6 inches changes the look and the price per linear foot.
What Iron Fence Costs in San Francisco, CA
Expect $4,130 to $10,620 for a residential iron fence installation in San Francisco, CA. That range covers the material, footings, hardware, and labor for a typical run.
What pushes a job to the high end:
- Linear feet and height: A 60-foot, 48-inch run in fabricated steel sits near the middle of the range. A 120-foot boundary or a taller security fence moves toward the top.
- Material grade: True wrought iron costs noticeably more than fabricated steel. Aluminum sits at the low end.
- Grade and site conditions: Hillside lots that need stepped panels, retaining wall work, or extra footing depth add labor. Flat lots stay near the low end.
- Gates: A pedestrian gate is straightforward. A driveway gate with automatic opener hardware is a separate cost.
- Permits and inspections: San Francisco fence permits add time and fees. A fence over 6 feet or on a property line with a neighboring structure often requires a permit and inspection.
A written estimate from us lists material, labor, footings, hardware, permit fees, and disposal separately. It doesn’t cover landscape repair after post holes are dug, or repainting an adjacent building. Those get called out on the quote when they apply.
See the difference
Before
After
Before
After
Before
AfterWhat San Francisco Homes Specifically Do to This Job
San Francisco’s housing stock is a different animal. Most of the properties we work on are Victorian and Edwardian wood-frame row houses from the 1880s to 1920s, many sitting on brick foundations that have shifted over a century. On hillside lots in Noe Valley and Bernal Heights, that means post footings sometimes hit old brick or rubble at 18 inches instead of clean soil, and the crew adjusts depth and footing design on the spot. On the west side – the Sunset, the Richmond – the marine fog and Pacific salt are the real story. Standard fasteners and paint corrode on a shorter cycle than anywhere else in the Bay, so we spec galvanized hardware and powder coat finishes that hold up. The combination of pre-1906 and post-1906 rebuild stock, soft-story seismic retrofit requirements, and neighborhood design review means fence work near a historic row house or in a review district can take longer to permit than the fence takes to build. On narrow side yards, access is often shared with a neighbor, which means coordinating a work window before day one. Homeowners sometimes pair this with our Patios, Walkways & Pool Decks in San Francisco when they’re reworking the whole rear yard, or with ADU Design & Permitting in San Francisco if the property line is being redrawn for a new structure. Much of this is part of a full Fence Installation in San Francisco scope, and we also do broader Fence Installation work on properties throughout San Francisco.
Serving San Francisco, CA – Our Local Coverage Area
We serve San Francisco and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Iron Fence in San Francisco
Most residential iron fence jobs in San Francisco take 2 to 4 weeks end to end, with 7 to 10 working days on site once materials arrive. Panel lead time and permit turnaround are the variables that stretch the schedule. Call (866) 320-2646 for a timeline specific to your property.
Often yes. San Francisco requires a permit for fences over 6 feet tall, fences in the front setback, and fences on a property line adjacent to a structure. Review district rules add requirements. We pull the permit and meet the inspector, and we flag the permit scope on the written estimate. Call (866) 320-2646 to confirm what your address needs.
Not on our jobs. The written line-item quote is what you pay, unless you change the scope. If a footing hits unexpected brick or rubble, we stop, explain the change, and get your approval before continuing. Call (866) 320-2646 for a quote you can budget against.
Yes, and it’s common across San Francisco. Hillside lots use stepped or racked panels that follow the grade, and post depth and footing design adjust to soil and existing foundations. We assess this in the first site visit. Call (866) 320-2646 to schedule one.
Every iron fence we install is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. That’s one of the longest workmanship guarantees in residential construction. Material warranties come from the fence manufacturer. Call (866) 320-2646 with questions about coverage.
Get a Free Iron Fence Estimate in San Francisco
Call (866) 320-2646 to schedule a free on-site estimate for an iron fence in San Francisco. A live person answers 24/7, and we’ll walk your property line, measure the run, check grade and access, and send a written line-item quote with the full permit scope called out. No pressure, no surprises – just the number to plan around.
Written by the team at Groundwork Construction Co.