A Groundwork company - serving San Francisco, CA
Iron Fence in Tiburon, CA | Groundwork Construction Co. of San Francisco

Iron Fence in Tiburon - Free Quote, Property Line & Permit Handled

We locate the property line, pull the permit, and handle HOA approval before a post goes in. Written price per foot, quoted on site, with no add-ons at the end.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

FenceFence
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Iron Fence in Tiburon, CA: What It Costs and How It Works

An iron fence in Tiburon runs $3,500 to $9,000 for most hillside lots, with the typical project landing in five to eight weeks from contract to final inspection. That figure covers layout, footings, fabrication, installation and finish, and it assumes a normal residential run of 80 to 150 linear feet. The number moves most on access, grade and the gate hardware you choose, not on the iron itself. Call (866) 320-2646 to set up a free on-site estimate.

Call (866) 320-2646

How the Iron Fence Work Actually Runs, Stage by Stage

A lot of fence quotes are written from a car window. Ours aren’t, and the schedule reflects that. Five stages, each with a decision point where you’re in control.

Stage 1: Site survey and access plan (week one, about two to three hours on site). On the winding streets above Main Street and around Belvedere, the survey is less about the fence and more about how material reaches it. We measure the run, check grade changes, and figure out whether a truck can back into the driveway or whether iron panels and concrete bags get walked in. You’ll confirm the property line and decide where the fence starts and stops.

Stage 2: Design and product selection (one to two weeks). You pick panel height, picket spacing, finial style, post size, finish and gate type. This is the stage where a security-focused design gets locked in: do you want vertical pickets at 4 inches on center, or a tighter 3-5/8 inch spacing that closes the visual gap? Do you want an arched top on the street elevation? This is also when we confirm whether any portion is set back under a full Fence Installation in Tiburon plan, since iron run alongside a new wood or retaining structure needs to be laid out together.

Stage 3: Layout and utility check (a few days). Before anyone digs, we stake the run and call for utility marking. On older Tiburon lots with unpermitted past work, we confirm what’s under the ground and where the property line actually sits relative to the fence you want.

Stage 4: Footings and post setting (two to four days, plus cure time). Posts get set in concrete footings sized to the fence height and local wind exposure. Because so much of Tiburon is built into slopes, sections on grade changes usually mean stepped panels rather than raked panels, and that gets decided here. Holes that can’t be machine-dug on a tight lot get dug by hand, which is slower and shows up in the quote honestly.

Stage 5: Fabrication, install and finish (two to three weeks). Iron sections get fabricated to measured dimensions, delivered, hung on the posts, and finished with your chosen coating. Gates get mounted and swing-tested. Final walkthrough covers post alignment, gate latches, finish coverage and touch-up. You sign off, and the 730-Day Done Right Promise covers the work from that day forward.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The Iron Fence Options You’ll Choose Between

Most homeowners land on one of a few paths. Here’s the honest trade-off of each.

  • Wrought iron (solid bar stock). The heaviest and longest-lived option, and the one that fits Tiburon’s salt air best when finished correctly. Costs at the top of the range. Suits estate entries and long street-facing runs.
  • Steel with a powder-coat finish. The most common choice for residential iron fencing. Powder coating resists rust far better than paint-on finishes, and touch-up is straightforward. Mid-range pricing. Good all-rounder for most lots.
  • Aluminum “iron-look” panels. Lighter, rust-resistant and less expensive, but a different product entirely, so we route that conversation through our separate aluminum page rather than pretending it’s the same thing.
  • Finish options. Black is standard and hides touch-ups. Bronze and dark green cost a bit more and look sharp against stucco. Bare or painted finishes cost less upfront but need recoating sooner under fog-belt moisture.
  • Gate and access hardware. Manual latch, self-closing hinge, or a rolling-code keypad that lets you change the entry code without rekeying. Rolling-code is the right call for shared driveway or alley access where codes get passed around.

What Iron Fence Costs in Tiburon, CA

Most residential iron fence projects here land between $3,500 and $9,000. Five variables push a job toward the low or high end.

  • Linear feet and height. An 80-foot run at 4 feet tall sits near the low end. A 150-foot run at 6 feet with two gates sits near the high end.
  • Grade and slope. Flat runs price simply. Stepped runs on a Tiburon hillside require more posts, more footings and more fabrication hours.
  • Access. If a truck can’t reach the site, hand-carry and hand-dig hours add real money. This is often the single biggest line item on a hillside lot.
  • Gate count and hardware. Each gate is its own fabrication and hardware job. Keypad entry, self-closers or a second pedestrian gate push the number up.
  • Permit scope. A street-facing run on a slope may need a permit and inspection. Interior side-yard runs usually don’t.

Your written estimate itemizes posts, panels, footings, gates, hardware, finish and permits, with the labor broken out. Expect a line-item number you can compare against another bid without guessing. Promotions include $1,000 off projects over $10,000 and 0% financing for 18 months, both of which matter on longer runs.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Tiburon Homes Specifically Do to This Job

Tiburon’s housing stock is the real driver. Near downtown you’re often working on early-1900s shingle and stucco cottages with tight side yards and old property lines. Up the hills you’ll find mid-century and contemporary homes with cantilevered decks, and iron fencing has to step with the grade rather than follow a flat line. Salt air off Richardson Bay and the bayfront corrodes fasteners, hinges and finish faster than inland Marin, which is why we spec corrosion-resistant hardware as the default here rather than an upgrade. Winter rain and fog-belt moisture on south- and west-facing exposures mean any painted finish needs proper prep and a recoat schedule. On the steep streets above Main Street and around Belvedere, the access reality described earlier applies to iron fencing as much as anything else: panels and footings get staged around a hairpin driveway before anyone prices the iron.

Serving Tiburon, CA – Our Local Coverage Area

We serve Tiburon and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently Asked Questions: Iron Fence in Tiburon

Get a Free On-Site Iron Fence Estimate in Tiburon

Call (866) 320-2646 and a live person picks up, day or night. We’ll schedule a free on-site visit, walk the run with you, talk through gate hardware and finish, and send a written line-item estimate. No pressure, no vague numbers. If you’re pairing the fence with a patio or hardscape, our Patios, Walkways & Pool Decks in Tiburon team can quote it alongside. And if the project includes a guest unit, our ADU Design & Permitting in Tiburon work pairs naturally with the same layout planning. For the wider scope, see our Fence Installation service.

Written by the team at Groundwork Construction Co.

Why Tiburon Chooses Groundwork Construction Co. of San Francisco

We set the standard for iron fence in Tiburon.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Tiburon

Getting your iron fence project started is simple.

1

Call or Request a Free Estimate

Tell us about your iron fence project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local iron fence pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Tiburon Customers Say

Trusted by homeowners across Tiburon and surrounding areas.

★★★★★

"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."

Marco Castillo
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan

Ready for Iron Fence in Tiburon?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Tiburon.

(866) 320-2646

Request a Free Estimate in Tiburon

Tell us about your iron fence needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch