Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Daly City, CA: What a Real Build Looks Like
A wood fence in Daly City typically runs $3,500 – $9,000 for most residential lots, installed over 2 – 4 days including tear-out of the old fence. A standard 6-foot dog-ear cedar privacy run with steel posts lands around $48 – $65 per linear foot, and the whole job usually needs one city permit. Call (866) 320-2646 to set up a free on-site estimate.
How We Build a Wood Fence in Daly City, Stage by Stage
Most homeowners picture a fence going up in an afternoon. On Daly City’s tight lots it’s closer to four working days, and the first day rarely involves wood at all. Here’s the actual sequence, and where you’ll need to make a call.
Day 1 – layout and demolition. We mark the property line against your plat or survey first, because a fence built two inches onto a neighbor’s slope is a dispute waiting to happen. Then the old fence comes down and we haul it off. On steep Mission-side streets this is when we find out whether the original redwood posts have rotted through at the soil line, which changes the footing plan. You confirm the exact line and any shared-cost arrangement with the neighbor before we cut anything.
Days 1 – 2 – footings and posts. Wood posts set straight into coastal soil rot fast here, so we pour concrete footings and set galvanized steel posts at roughly 6 to 8 feet on center, then bolt wood rails to them. The holes get dug by hand in most Daly City yards because the slopes won’t take a machine. You’ll pick post spacing and height at this stage, since 6-foot privacy versus 4-foot planter style changes the wind load and the footing depth.
Days 2 – 3 – framing and rails. Top and bottom rails go up, backed by a mid-rail on taller runs. This is the structural spine that resists the wind coming off the fog, and it’s also where a cheap job shows: one rail and thin boards and the fence starts to lean within two winters. We frame to stand.
Day 3 – boards and finish. Pickets go up board by board, then gates, caps, and the gate hardware. You choose board profile and gap (a tight no-gap privacy picket versus a small-gap style that sheds wind better) and whether you want a cap rail.
Day 4 – inspection and cleanup. We pull the permit and meet the inspector, walk the finished fence with you, and clear the site. If the inspector flags a setback against a property line on a narrow lot, that gets resolved before we call the job done – not left for you to chase.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between in Daly City
Wood is the right material for these post-war yards, but the species and the framing underneath are where the money and the lifespan live. Here’s the honest trade-off on each.
- Cedar (Western red cedar) – the Daly City default. Naturally rot-resistant, holds stain well, and handles the damp air better than almost anything else at this price. It runs toward the top of the range per foot, but on a slope that stays wet, it’s usually the fence that’s still standing in fifteen years.
- Pressure-treated pine – the budget pick. Cheaper per board and fine for the framing and posts, but the boards check, warp, and drink up moisture. It needs re-sealing every couple of years. Good for a back-line fence you rarely look at, less so for the street-facing run.
- Redwood – the upgrade. The older homes here were often framed in redwood, and a redwood fence matches that character and lasts. It costs more, and supply runs tight, so it’s worth deciding early.
- Steel posts with wood boards – the smart hybrid. We set galvanized steel posts and hang wood rails and pickets on them. You get the look of wood with a post that won’t rot out of the ground. This is the configuration we lean toward on the fog-soaked slopes off Westlake.
- Height and style. Six-foot privacy is standard for a backyard. A four-foot picket or a lattice-top run reads friendlier at the front and catches less wind on an exposed corner lot.
- Finish. A penetrating oil stain protects the wood and lets it breathe; a film-forming paint traps moisture and peels faster on this coast, which is why we steer clear of it on fencing.
What Wood Fence Costs in Daly City, CA
For most Daly City lots, a wood fence installation lands between $3,500 and $9,000. That spread is wide because five things push the number, sometimes hard.
- Linear feet and height. The single biggest driver. A 60-foot side-yard fence and a 200-foot perimeter are different jobs entirely, and going from 4 to 6 feet adds material and deeper footings for wind load.
- Site access and slope. Steep yards mean hand-digging footings and carrying every board up a grade – more labor hours, more cost. A flat, open lot with a gate wide enough for a wheelbarrow sits at the low end.
- Existing condition. Rotting posts, a fence tangled in overgrowth, or concrete footings that have to be broken out all add tear-out time. Original redwood that’s quietly rotted from the fog is common here and gets priced in.
- Material grade. Pressure-treated pine versus cedar versus redwood spans the range above by thousands on the same footprint.
- Permit scope. A standard residential fence permit is straightforward; a fence that touches a retaining wall on a hillside lot, or one that has to be re-sited because of a survey discrepancy, adds plan-review time.
Every written estimate breaks these out line by line – boards, posts, footings, tear-out, permit, and haul-away – so you see where the money goes. What’s typically not included: landscaping repair after tear-out, legal survey work if the property line is genuinely unclear, and any retaining-wall work the fence sits on top of. Upfront pricing means the number you sign is the number you pay, with no change orders sneaking in mid-build. The work is backed in writing by our 730-Day Done Right Promise.
See the difference
Before
After
Before
After
Before
AfterWhat Daly City Homes Specifically Do to a Wood Fence
Daly City isn’t a flat suburb, and its fences know it. The classic pattern here is a 1940s to 1960s stucco-over-wood-frame house up a steep hill, fog rolling in most of the year, wind-driven rain hitting the west-facing side, and a neighbor’s wall only a few feet away. That combination is hard on wood. Posts rot at the soil line faster than inland because hillside soils stay saturated longer, boards on the windward side wear their finish off and grey out, and the damp air keeps the whole fence from ever fully drying out. On the steep streets off Mission and around Westlake, we routinely find the original redwood framing has quietly rotted through and unpermitted additions sit right up against where a new fence line needs to run – both of which have to be sorted before anything gets signed off. Tight lots mean the property line is a real negotiation, and a fence that runs close to a slope may need a retaining-wall check before it can pass inspection. If the drainage around the fence is the deeper problem, homeowners often pair this with Concrete Driveways & Concrete Work in Daly City to move water away from the footing, or with Paver Driveways in Daly City when the front yard is getting reworked at the same time. This is a piece of a bigger exterior picture, and you can see the wider scope on our Fence Installation in Daly City page, or start with Fence Installation for the full service. We cover every ZIP in Daly City – 94014, 94015, 94016, and 94017.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked Questions: Wood Fence in Daly City
Most residential wood fences take 2 to 4 working days once materials are on site, with permit approval typically adding a week or two before we start. Steep lots with hand-dug footings and heavy tear-out sit at the longer end. Call (866) 320-2646 for a timeline tied to your specific yard.
Yes, a residential wood fence generally requires a permit here, and the fence has to respect height and setback rules relative to the property line. On hillside lots near a retaining wall, plan review can take a little longer. We pull the permit and meet the inspector, so that part isn’t on you.
Yes. Steep lots are the norm on the streets off Mission and Westlake, and we hand-dig footings and step the fence down the grade so it follows the hill instead of floating above it. The slope does add labor, so it’s priced into the estimate up front.
A wood fence installation in Daly City typically runs $3,500 – $9,000 depending on length, height, material, and how much tear-out is involved. Cedar and redwood run higher than pressure-treated pine; steel posts with wood boards cost a bit more but last longer in the fog. Call (866) 320-2646 for an exact quote – estimates are free.
Workmanship on your wood fence is covered by our 730-Day Done Right Promise – if it’s not done right, we make it right. We stand behind the build long after the last board goes up, and the material manufacturer’s warranty on boards and posts passes through to you.
Get a Free Wood Fence Estimate in Daly City
If your Daly City fence is leaning, rotting at the posts, or you’re ready to replace it with something built to stand against the fog and wind, call (866) 320-2646. We’ll walk the lot, check the property line and slope, and hand you a written line-item estimate at no cost. A live person answers any hour, and every job is backed in writing by our 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.