Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Iron Fence in Daly City, CA: What It Costs and How It’s Built
An iron fence in Daly City typically runs $3,500 to $9,000, with most residential jobs landing around $5,200 for 60 to 100 linear feet of painted steel picket on a concrete footing. The work itself takes two to four days once permits and materials are lined up. Call (866) 320-2646 and we’ll set up a free on-site estimate so you get a real number, not a phone guess.
Wind, Salt Fog, and Why Iron Fences Here Fail Early
The fence you buy in Daly City has to survive one of the harshest exterior environments on the Peninsula. Persistent fog, wind-driven rain blowing in off the Pacific, and cool damp air most of the year mean any iron fencing here needs to be built for moisture first, appearance second. A fence that looks fine in a drier suburb can start showing rust bleed at the welds within 18 months on a west-facing slope off Westlake.
That’s the lens we build every Daly City iron fence through: how it holds up against fog and wind load, how the footings handle saturated hillside soil, and what the city will actually sign off on. If you’re thinking about a whole property line project, this work often fits inside a full Fence Installation in Daly City scope. Read on for what drives the price, what your options are, and the local quirks that make this job different from a fence in San Bruno or Pacifica.
Key takeaways
- Typical Daly City iron fence cost: $3,500 – $9,000 for 40 to 120 linear feet.
- Powder-coated steel is the default; bare or thin-painted iron rusts fast in coastal fog.
- Most jobs are done in 2 to 4 working days once materials and permits are in hand.
- Steep lots and tight side yards add labor, sometimes more than the fence material itself.
- Every job is backed by our 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
How We Build an Iron Fence in Daly City, Step by Step
Here’s the real sequence, with the decisions you’ll make and the time each stage takes.
Stage 1: On-site measure and layout (day 1, about 90 minutes)
We walk the property line, confirm where it actually sits (surveys are worth the money on hillside lots), and mark post locations. You decide fence height (4 ft, 5 ft, or 6 ft), picket spacing, and whether you want a gate. On steep grades, we talk through stepped panels versus racked panels, since that changes the look and the cost. This is also where we flag anything that will need repair before we build.
Stage 2: Permit and HOA check (1 to 3 weeks, before a shovel hits the ground)
Daly City requires a fence permit for most front-yard and over-height fences, and corner lots have sight-line rules at the intersection. We pull the permit and confirm setbacks. If your home is in an HOA, we confirm the approved style and color first, because tearing out a fence the board rejects is expensive. You’ll approve a written, line-item quote with fixed pricing before we order anything.
Stage 3: Demolition and footing prep (day 1 to 2 of the build)
We remove the old fence and haul it off, then dig and pour concrete footings for each post. On hillside lots we may need to pin footings into a slope or deal with rock, which adds time. Posts set in concrete need to cure before panels go up, so this stage is not one you can rush in wet, cool weather.
Stage 4: Fabrication and install (day 2 to 3)
Pre-fabricated panels go up on the set posts; custom panels or gates take longer. We check every gate for swing and latch, torque the hardware, and touch up any finish nicks with matching powder-coat paint. This is the stage where careful leveling matters, and where a cheap fence starts to look cheap if it isn’t done right.
Stage 5: Final inspection and walkthrough (day 4)
We meet the city inspector if the permit requires it, then walk the fence line with you: gate tension, post plumb, finish condition. Any punch-list items get fixed on the spot. From there, our 730-Day Done Right Promise covers workmanship, so if something isn’t right, we make it right.
The Iron Fence Options You’ll Actually Choose Between
Most of the decision comes down to the metal, the finish, and the style. Here’s the honest trade-off for each.
- Powder-coated steel: the standard choice for coastal Daly City. Holds up well against fog and salt air, costs roughly $45 to $85 per linear foot installed. Suits most residential properties. Ask for a coating thickness spec; thin coats fail first.
- Wrought iron (true): heavier, more ornate, and pricier, often $70 to $140 per linear foot installed. Beautiful and durable, but needs periodic repainting and heavier footings. Suits homeowners who want the traditional look and plan to maintain it.
- Aluminum (iron-look): lighter and rust-proof, usually $35 to $70 per linear foot. Lower maintenance but less rigid; a poor fit where wind load or gate weight matters. If you want the look without the rust risk, it’s a real option.
- Finish: powder-coat vs. wet paint. Powder-coat lasts years longer in coastal fog. Wet paint is cheaper upfront and needs touch-ups every few years.
- Gates: a single walk gate typically adds $600 to $1,500; a double drive gate $2,000 to $4,500, more if you want an automated opener.
- Panel style: flat-top, spear-top, and arched-top styles rank from simplest to most custom. Custom arches add labor and lead time.
Want a broader sense of our fence work across materials? See our Fence Installation service.
See the difference
Before
After
Before
After
Before
AfterWhat an Iron Fence Costs in Daly City, CA
Expect $3,500 to $9,000 for a typical residential iron fence in Daly City. The variables that push a job toward the low or high end:
- Linear feet: the single biggest factor. A short 40-foot run sits at the low end; 120 feet pushes past $9,000.
- Height and style: 6-foot spear-top costs more than 4-foot flat-top.
- Terrain and access: steep lots off Mission or Westlake, tight side yards next to a neighbor’s wall, and rocky ground all add labor hours.
- Existing fence removal: demo and haul-off is often $400 to $1,200 on its own.
- Gates: a walk gate or drive gate adds materially; automated gates add more.
- Permit scope: front-yard, corner-lot, and over-height fences trigger permit and inspection fees.
Your written estimate should spell out linear feet, panel style, post spacing, footing spec, finish, gate cost, demo, and permit fees, plus a clear total. It should also name what’s excluded, like landscaping repair or moving utility lines. Our no-hassle upfront pricing means the number you see is the number you pay. Anything not on the quote is a conversation before we do it, not a change order after.
What Daly City Homes Specifically Do to This Job
Daly City’s 1940s – 1960s stucco-over-wood-frame homes sit on steep, fog-soaked slopes, and that shapes nearly every iron fence job here. On the tight lots off Mission and Westlake, neighbors’ walls are only feet away, so access is a puzzle and a footing hole can run into a property line, a retaining wall, or an unpermitted garage conversion that quietly rotted from years of fog. We often find original redwood framing and failing drainage that has to be addressed before a fence can be signed off. In ZIP codes 94014, 94015, 94016, and 94017, the cool damp air and hillside soils stay saturated longer, so footings need to be deeper and drainage around the fence line needs real thought. If you’re touching the same areas, homeowners often pair this with Patios, Walkways & Pool Decks in Daly City so the hardscape and fence line get built together.
Where the fence ties into a hillside retaining wall or a new garage or ADU, homeowners often pair this with ADU Design & Permitting in Daly City so all the permits move together. We work all of Daly City and the surrounding neighborhoods, and we know what the inspectors here look for.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Iron Fence in Daly City
A typical iron fence in Daly City takes two to four working days on site once the permit is issued, with permit turnaround often adding one to three weeks. Steep lots or custom gates can stretch the build. Call (866) 320-2646 and we’ll give you a realistic schedule for your property, and the estimate is free.
Most front-yard and over-height iron fences require a Daly City permit, and corner lots have sight-line rules. Because we pull the permit and schedule the inspection for you, you don’t have to chase the city. Call (866) 320-2646 to find out what your lot needs.
It can if it’s bare steel or thinly powder-coated; properly powder-coated steel holds up well against coastal fog. Finish quality matters more here than almost anywhere on the Peninsula. Call (866) 320-2646 and we’ll spec a coating that fits your site.
Most Daly City iron fence projects fall between $3,500 and $9,000, depending on length, height, gates, terrain, and whether an old fence needs removal. Call (866) 320-2646 for an exact quote; estimates are free.
Every iron fence we install is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship, and we stand behind it in writing. Call (866) 320-2646 to talk through your project.
Get a Free Iron Fence Estimate in Daly City
Call (866) 320-2646 to schedule a free on-site estimate for your iron fence. We’ll measure the property line, talk through styles and finishes, flag any permit or access issues, and leave you with a written, line-item quote with fixed pricing. Calls are answered by a live person, 24/7. Financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off.
Written by the team at Groundwork Construction Co. of San Francisco.