Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Tiburon: What It Takes and What It Costs
Walk-in showers and shower remodeling in Tiburon typically run $9,000 to $28,000, with the shower itself landing between $4,500 and $12,000 for the installation. A straightforward curbless walk-in conversion takes about two to three weeks from demo to final tile; a full primary bath rebuild around a new shower runs four to six weeks. The timeline and the number both hinge on how much plumbing and structure move, not on finishes. Call (866) 320-2646 to set up a free on-site estimate.
How We Run a Shower Remodel in Tiburon, Start to Finish
Five stages. Each one ends with a decision from you, and each one has a real duration so you know where your project stands.
Stage 1: Site visit and scope (day 1, 60 to 90 minutes)
We measure the existing stall or tub alcove, check valve condition, inspect what’s behind the wall, and note any framing or floor-joist issues. On hillside Tiburon homes this is also where we look at access: a narrow driveway off a winding street above downtown can mean materials get staged at the curb and walked in. You leave the visit with a written line-item estimate, not a verbal range.
Stage 2: Demo and rough prep (days 2 to 4)
We pull the old surround, tub, and glass, then open the wet wall to expose the valve and drain. If the framing behind is soft from old moisture, we replace it now rather than tile over it. Rough plumbing gets set to the new fixture locations, the subfloor is leveled, and any structural adjustment sits squarely in this window. You finalize your tile and fixture selections in this stage so nothing stalls at the back end.
Stage 3: Inspection and waterproofing (days 5 to 6)
Rough plumbing and any electrical for a lighted niche or heated floor get inspected before anything closes up. Then we build the waterproofing system – a bonded sheet or liquid membrane with pre-formed corners, a sloped mortar bed or foam pan, and a flood test that holds water overnight to prove the pan drains and seals. You don’t have a choice to make here except to review the inspection result with us.
Stage 4: Tile and setting (days 7 to 12)
Tile goes up on the walls and down on the floor with a code-compliant slope to the drain, followed by grout and a cure window. Niche placement, bench type, and curbless versus low-threshold get locked at the front of this stage. Grout and sealant need that full cure before glass goes in.
Stage 5: Glass, trim, and final walkthrough (days 13 to 16)
Frameless or semi-frameless glass installs with tempered panels, the shower head and controls get set, and we caulk and clean. A final quality walkthrough with you follows, and your coverage starts from the 730-Day Done Right Promise. Every shower we build is finished by background-checked, uniformed technicians.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Pick Between
Most of the cost swing on a Tiburon shower comes from four choices. Here’s the honest trade-off on each.
- Curbless vs. low-threshold: A curbless shower needs the floor reworked so the pan sits flush with the adjacent tile – more demo and a bigger price jump than a low-threshold pan that mimics the look with a small lip.
- Tile: porcelain vs. natural stone: Porcelain is tougher, seals better against moisture, and holds up against the fog and salt air off Richardson Bay; marble and limestone look richer but need sealing and re-sealing to survive a wet coastal bathroom.
- Glass: frameless vs. semi-frameless: Frameless tempered glass gives the cleanest sightline and reads as the high-end option; semi-frameless saves money and hides the hardware, which corrodes faster in salt air. We spec stainless or coated hardware either way.
- Drain: linear vs. center: A linear drain lets you use large-format tile with fewer grout lines and handles water better on a longer floor; a center drain is simpler and cheaper for a compact stall.
- Fixtures: A thermostatic valve, a rain head, and a hand shower can live behind a Kohler or similar grade of trim. It costs more up front and lasts – the trade-off is the valve body, not the shiny plate you see.
Vanity and storage choices often get folded in when the shower work is part of a wider project. If that’s your plan, the scope lives on our Bathroom Remodeling in Tiburon page rather than here.
What Walk-In Showers & Shower Remodeling Costs in Tiburon, CA
For Tiburon, the full walk-in shower remodeling range is $9,000 to $28,000. Below that, single-line installations start at $4,500 to $12,000 for a walk-in shower, and a straight shower replacement sits at $3,000 to $8,500. The low end of the full range is a like-for-like swap with modest tile; the high end is a curbless rebuild with premium stone, linear drain, and moved plumbing.
Five variables push a job toward the top of the range:
- Size and configuration: Going from a 36-inch stall to a five-foot walk-in needs floor and wall work, not just new tile.
- Existing condition: Water damage behind the wall, rotted framing, or a failing pan adds days and dollars.
- Moving plumbing or structure: Relocating the drain, valve, or a bearing wall is the single biggest jump.
- Material grade: Porcelain versus slab-marble runs the tile line from a few hundred to several thousand dollars.
- Permit scope: A structural or plumbing change pulls a permit; a tile-and-glass-only swap may not.
Your written estimate lists materials by line, labor, permit cost, and cleanup, and it doesn’t change mid-job unless you approve a change order in writing. No-hassle upfront pricing means the number you see is the number you pay. Call (866) 320-2646 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Tiburon Homes Do to This Job
Tiburon is a steep-hillside peninsula, and that shapes a shower remodel more than most homeowners expect. On the winding streets above downtown and around Belvedere, access is the first problem: a dumpster or material delivery may not fit the drive, so tile and glass get staged at the curb or walked in, and that logistics time lands on the schedule and the bid. Homes here range from early-1900s shingle and stucco cottages to mid-century and contemporary hillside houses with cantilevered decks, and older stock often hides old moisture in the framing behind a bathroom wall. Marin’s fog belt and winter rain cycle constantly against south- and west-facing hillside exposures, driving rot in wood and trim, while salt air off Richardson Bay corrodes fasteners and metal hardware fast. That’s why we spec stainless hardware, sealed grout, and coated shower components here: over a decade, uncoated fittings in a bayfront Tiburon bathroom show pitting and failure years before an inland one would. We cover the whole peninsula – the 94920 ZIP and the neighborhoods around it. Permits and inspections are pulled through the local building department, and any coastal or HOA review gets factored before we order materials, not after. This same access and moisture reality shows up on other exterior work – homeowners often pair a bathroom project with Roof Replacement & Installation in Tiburon or Metal Roofing in Tiburon once they see how salt air treats their hardware.
Serving Tiburon, CA – Our Local Coverage Area
We serve Tiburon and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Tiburon
Most walk-in showers and shower remodeling in Tiburon take two to three weeks from demo to final glass, and four to six weeks if the shower is part of a wider primary bath rebuild. The two-week jobs are like-for-like swaps; anything that moves plumbing or structure adds a week. Call (866) 320-2646 to schedule your free estimate and a firm timeline.
A tile-and-glass-only shower replacement may not need a permit, but any change to plumbing, drains, or structure does. We tell you upfront whether your job requires one, and we pull it and pass inspection when it does. Call (866) 320-2646 with your project details and we’ll confirm the permit scope.
Yes, in many cases. If the existing drain and valve can stay put, a walk-in shower swaps in with new waterproofing and tile, which keeps the job in the lower half of the $9,000 to $28,000 range. A curbless or relocated-drain shower does move plumbing. Call (866) 320-2646 to schedule a free on-site estimate and we’ll tell you which path your bathroom allows.
Walk-in shower installation in Tiburon runs $4,500 to $12,000, and full walk-in shower remodeling runs $9,000 to $28,000. Shower replacement is $3,000 to $8,500. The price moves most on moving plumbing, material grade, and access logistics on hillside lots. Call (866) 320-2646 for an exact quote – estimates are free.
Every walk-in shower and shower remodeling job we do is covered by the 730-Day Done Right Promise: if it isn’t done right, we make it right. That covers workmanship for two years, with manufacturer coverage on tile, glass, and fixtures on top. Call (866) 320-2646 to schedule your free estimate.
Get a Free Walk-In Shower Estimate in Tiburon
Call (866) 320-2646 to set up a free on-site estimate for walk-in showers & shower remodeling in Tiburon. A live person answers, day or night. We’ll measure the space, check the plumbing and framing, note any access logistics your hillside lot demands, and hand you a written line-item quote with a fixed price. No change orders unless you approve them. If you’re weighing a wider rebuild, our bathroom remodeling service and the Tiburon service page cover the full scope.
Written by the team at Groundwork Construction Co.