Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Wood Fence in Tiburon, CA: What It Costs and How It Holds Up
A wood fence in Tiburon typically runs $3,500 – $9,000, with installation finished in three to five working days on a straightforward lot. The number moves with linear footage, wood grade, gate count, and, in this town, access. Steep hillside lots and waterfront exposure add real labor that a flat-lot bid never shows. Call (866) 320-2646 for a free on-site estimate and a written line-item quote.
What drives the price here more than anywhere else
Fences fail at the post and at the fastener long before the boards give out. Salt air off Richardson Bay and the fog-belt moisture cycle attack untreated steel, zinc-plated hinges, and galvanized nails at the ground line. We specify stainless and hot-dip galvanized hardware on every Tiburon wood fence for that reason. It’s the difference between a fence that lasts 12 years and one that lasts 18.
The Build: How a Wood Fence Goes In, Stage by Stage
We don’t quote a fence and then improvise the build. Here’s the actual sequence on a Tiburon job, with the decisions you make and when.
Day 1 – Site walk, layout, and underground check
We mark the fence line with stakes and string, then call 811 to locate buried utilities before anyone digs. On hillside properties above Main Street, we also confirm the property line against the plat and check for retaining walls, irrigation lines, and drainage runs that the fence will cross. You tell us the fence height, the privacy line, and where gates go. This stage takes a half day to a full day depending on site complexity.
Day 1-2 – Demolition and post excavation
If there’s an old fence, we tear it out and haul it. Posts get dug to a minimum of 30 inches, deeper on slopes where frost and soil movement push harder. On Belvedere and peninsula-tip lots with rocky or fill-heavy soil, we may hit hardpan and switch to a rock bar or a gas auger. That’s the kind of thing that shows up on a real hillside job and gets absorbed in a fixed-price quote, not billed back to you later.
Day 2-3 – Post setting and curing
Posts go in with concrete and set overnight. This is the stage that can’t be rushed. A fence that goes up on green posts looks fine for a season and then leans. On steep grade, we step the posts and build the rails to the slope rather than leveling the whole run, which wastes material and looks wrong on a hillside. You’ll want to be on-site for the post-set inspection if you have a preference on rail height and spacing.
Day 3-4 – Rails, boards, and gates
Rails go on, then the pickets or boards, then the gates. Gate hardware gets the same stainless treatment as the rest of the fence. We hang gates square and shim them so they don’t sag in the first wet season. This is also when you decide on board pattern, cap rail, and whether the finished side faces the street or faces your yard.
Day 4-5 – Final walkthrough and cleanup
We do a walkthrough with you, check every gate and post, and clean up the site. If you’re pairing this with other exterior work, this is where a full-scope build saves you a second mobilization. Many homeowners pair a new fence with Paver Driveways in Tiburon or Concrete Driveways & Concrete Work in Tiburon doing the approach at the same time.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
Wood fence isn’t one product. These are the real decisions, with honest trade-offs.
- Cedar vs. pressure-treated pine. Cedar resists rot and insects naturally and holds stain beautifully in the fog belt. It costs more up front. Pressure-treated pine is cheaper and structurally solid, but it needs staining every two to three years in this climate to hold its look.
- Board-on-board vs. dog-eared pickets. Board-on-board gives full privacy and a cleaner look. Dog-eared pickets cost less and read more traditional. On a shingle or stucco cottage near downtown Tiburon, that traditional look often fits the street better.
- Stainless vs. galvanized fasteners. Galvanized works inland. Near the water, we push stainless because the salt-air corrosion cycle eats through lesser coatings in a handful of seasons.
- Post material. We can set wood posts or set galvanized steel posts inside the wood line. Steel posts cost more and never rot at the ground line, which is the failure point on every wood fence.
- Height and gate count. Six-foot is standard. Eight-foot adds wind load and material. Each gate adds hardware, bracing, and hang time. Homeowners often ask for a double gate for vehicle or equipment access on a narrow hillside lot.
What Wood Fence Costs in Tiburon, CA
The range is $3,500 to $9,000 for a typical residential job. Below is how that number breaks down.
- Basic pressure-treated pine, 100 – 150 linear feet, single gate: $3,500 – $5,000
- Cedar, 150 – 200 linear feet, one or two gates: $5,500 – $7,500
- Cedar with stainless hardware, steel posts, and a double gate: $7,500 – $9,000+
Five variables push a Tiburon job to the high end:
- Access. If a truck can’t reach the line, material has to be walked or craned in. That’s the biggest cost driver on hillside lots.
- Existing fence condition. An old fence rooted into a retaining wall or grown into landscape takes longer to remove cleanly.
- Wood grade. Cedar over pine, clear over knotty, and the finish you choose all move the number.
- Grade and slope. Stepped posts, deeper digs, and extra bracing cost more labor.
- Permit scope. Most residential fences under six feet on a flat lot don’t require a permit. Anything taller, anything in a flood zone, and anything considered a retaining structure does. We confirm requirements before the quote is final.
A written estimate includes materials, labor, hardware, demolition, haul-off, and cleanup. It typically does not include landscape repair after a fence line is cleared. We tell you that up front so there’s no surprise on the walkthrough.
See the difference
Before
After
Before
After
Before
AfterWhat Tiburon Homes Specifically Do to a Fence Job
Tiburon is a steep-hillside peninsula town where nearly every construction project is really a site-engineering project. Narrow winding access roads above Main Street and on Belvedere mean contractors plan staging before they price the framing. A dumpster or material pallet can’t always reach the line. On hillside lots, material gets walked or craned in. That reality separates a Tiburon fence job from the same square footage in flatter Marin towns.
Then there’s the housing stock. Early-1900s shingle and stucco cottages near downtown sit on older lots with fences that have grown into retaining walls and drainage runs. Mid-century and contemporary hillside homes on cantilevered decks often want fencing that frames the view without blocking it. Waterfront estates on the peninsula tip face the salt-air cycle hardest, and that’s where stainless hardware and steel posts earn their keep. The fog belt and winter rain cycle on south- and west-facing exposures drive rot faster than inland Marin. We see it in fence posts and gate frames first. If the wider project involves a whole-yard plan, it may make sense to look at our Fence Installation in Tiburon page for the broader scope, or our Fence Installation service overview, and if you’re weighing options across the peninsula, our Tiburon service page covers the area we work.
Serving Tiburon, CA – Our Local Coverage Area
We serve Tiburon and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Wood Fence in Tiburon
Most wood fence jobs in Tiburon take three to five working days from the first dig to the final walkthrough. Steep hillside access, an oversized gate, or a fence tied to a retaining wall can push it to a week. We schedule around weather and material delivery, and we tell you the working window in the quote, not after we show up.
Most residential fences under six feet on a flat lot don’t need a permit, but anything taller, anything in a flood zone, or anything attached to a retaining structure does. Local requirements vary by lot, and we confirm them before the quote is final. This is one of the reasons we don’t quote fences over the phone.
The range is $3,500 to $9,000 for a typical residential installation, with the majority of jobs landing between $5,000 and $7,500. Access is the single biggest variable. On hillside and steep-street lots, material handling adds real labor. Call (866) 320-2646 for an exact number – estimates are free and we come on-site.
No. Our pricing is fixed and upfront. The number on the written estimate is the number you pay. The only exception is if you ask for a change mid-job, and then we write a new line item and you approve it before we touch anything. We don’t do change orders after the fact, and there’s no line-item surprise on the final invoice.
Every wood fence we build is covered by the 730-Day Done Right Promise. If it’s not done right, we make it right. That’s one of the longest workmanship guarantees in the residential construction space, and it applies to post setting, gate hang, and hardware. Fence material warranties depend on the manufacturer and the wood grade you choose.
Get Your Free Wood Fence Estimate in Tiburon
Call (866) 320-2646 to schedule a free on-site estimate for a wood fence in Tiburon. We’ll walk the line with you, confirm the permit requirements for your lot, and put a written line-item quote in your hands. Calls are answered by a live person 24/7. No voicemail. From foundation to finish line, we build it right and back it in writing.
Written by the team at Groundwork Construction Co.