Driveway & pavers
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Asphalt Driveways & Resurfacing in Tiburon: What the Job Actually Involves
Asphalt driveways & resurfacing in Tiburon typically run $3,500 to $9,000 for new asphalt paving, while a full tear-out and replacement lands between $5,000 and $14,000 depending on grade, access and drainage. Most residential jobs take two to four working days on site, plus a curing window before you park on the surface. On the steep lots above downtown, the honest variable is often access, not asphalt. Call (866) 320-2646 to schedule a free on-site estimate.
A Stage-by-Stage Look at How We Build or Resurface an Asphalt Driveway
Asphalt work fails on prep, not on the blacktop. Here’s the real sequence we follow so you know what’s happening on your property and when.
- Day 1, morning: site assessment and layout. We measure square footage, check slope and drainage fall, and confirm the subgrade condition by test-pitting a section. On Tiburon hillside properties this is also where we confirm how equipment reaches the pad, since the driveway you see is often narrower than you think on approach. You decide the layout and confirm the finish edge (curb, gravel shoulder, or retaining wall tie-in).
- Day 1, afternoon: demolition and removal. Existing asphalt or broken concrete is broken out and hauled. On a resurface-only job, we skip demo and mill or clean the surface instead. You confirm any repairs to the base before we proceed.
- Day 2: base prep and grading. We compact the sub-base, correct drainage fall, and install a compacted aggregate base layer where the subgrade is soft. You’ll see the finished grading before any asphalt arrives.
- Day 3: paving. Hot-mix asphalt goes down and is rolled to compaction. Resurfacing gets a tack coat, then a 2-inch overlay. The surface cures overnight and is walkable in a few hours, drivable in 24 to 48 hours.
- Day 4: finishing. Edges are dressed, drainage is verified, and any striping or sealing is scheduled. Sealing happens after a curing window rather than immediately, so it’s booked later.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Choices You’ll Make Before the First Load of Asphalt Arrives
Once you know the job is asphalt, the decisions narrow to a handful that affect both cost and longevity. Here’s how each one plays out.
- Resurface vs. full replacement. A 2-inch overlay is faster and less expensive, but only works if the existing base is sound and under about 30 percent surface damage. If the base has failed, replacement is the only option that lasts.
- Hot-mix grade. Standard residential hot-mix is the practical choice for most driveways. Higher-grade mixes cost more but handle heavier traffic and steep grades better, which matters on hillside approaches where a delivery truck might be in and out.
- Base depth. A shallow base is cheaper and fails sooner. On steep or poorly draining lots, a deeper aggregate base adds cost but protects the surface. We always recommend at least 4 inches of compacted base for driveway use.
- Edge treatment. Concrete curbing, gravel shoulder, or a retaining wall tie-in each change the look and the price. Curb adds finish and holds the edges; gravel is cheaper but needs upkeep.
- Sealing. Asphalt sealing is a separate booking done after the new surface cures, not the same day. It’s the maintenance step that extends surface life by years.
When the driveway is part of a full Driveway & Pavers in Tiburon project, we scope the asphalt and any adjacent hardscape together so the grades and edges line up.
What Asphalt Driveways & Resurfacing Costs in Tiburon, CA
Expect $3,500 to $9,000 for new asphalt paving and $5,000 to $14,000 for a full driveway replacement. Resurfacing sits below that when the base is sound, and driveway sealing, booked separately, runs $250 to $700. The five factors that push a job toward the high end:
- Square footage and slope. Steep drives need deeper base, more compaction, and slower paving.
- Existing condition. A failed base means removal, hauling, and new aggregate, which adds labor and disposal cost.
- Access and staging. Hauling equipment and material onto a hillside site can mean longer truck time and manual staging.
- Drainage corrections. Regrading, culverts, or a French drain add cost but prevent the surface from failing.
- Edge and finish scope. Curb, wall tie-ins, and striping are add-ons.
A written estimate should list demo, hauling, base depth, asphalt type, compaction, and edge work. It typically does not include retaining wall repairs or drainage structures found under the old surface, which we quote as a change order only if approved. Our driveway & pavers service follows upfront pricing, so the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhy Tiburon’s Steep Lots and Salt Air Change the Job
Tiburon is a hillside peninsula, and nearly every construction project here is really a site-engineering project. Narrow winding access roads on the hills above Main Street and Belvedere-Tiburon, tight lots, and waterfront exposure mean grading, retaining walls, and staging logistics drive cost and schedule more than the finish work. Dumpsters and concrete trucks often can’t reach the pad, so materials get walked or craned in. That reality shapes how we plan an asphalt driveway here: equipment sizing, access ruts, and where the spoil pile can sit all get sorted before we price the asphalt. The bay air off Richardson Bay also corrodes fasteners and metal edges over time, so we spec corrosion-resistant hardware on curb and drainage. Homes near downtown range from early-1900s shingle and stucco cottages to cantilevered contemporary hillside houses and waterfront estates on Belvedere, and older stock built into slopes shows the failure modes we see most: cracked and settled asphalt at the top of a grade, and drainage that runs toward the house. Homeowners often pair this with New Detached ADU in Tiburon work, where a new driveway has to serve the second unit, or with a Junior ADU & Interior Conversion in Tiburon that adds parking needs to a lot that was never graded for it. We cover the full Tiburon peninsula, from the flats up to Belvedere.
Serving Tiburon, CA – Our Local Coverage Area
We serve Tiburon and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Asphalt Driveways & Resurfacing in Tiburon
A typical job takes two to four working days on site, then 24 to 48 hours before you park on it. Resurfacing is faster than full replacement because there’s no demolition. Weather can push the schedule, since asphalt needs dry conditions. Call (866) 320-2646 for a timeline based on your specific lot.
Most like-for-like resurfacing doesn’t require a permit, but new driveway construction, grading changes, or work near a slope or drainage feature can trigger one. Because Tiburon sits on steep hillside, grading and retaining work often draw review. We pull the permits and pass the inspections that apply to your project. Call to confirm what your property needs.
Yes, if the existing base is sound and surface damage is limited to under roughly a third of the area. A 2-inch overlay bonds to the prepared surface and skips demolition. If the base has settled or cracked through, resurfacing only hides the problem and we’d recommend replacement. We test-pit the base during the estimate.
New asphalt paving runs $3,500 to $9,000, and a full driveway replacement lands between $5,000 and $14,000, with resurfacing often below the replacement range. Steep slopes, poor access, and drainage corrections push toward the high end. Call (866) 320-2646 for an exact quote, and the estimate is free.
Every asphalt job is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. That covers workmanship on the paving, base prep, and edges for two full years. Material defects are handled through the supplier. You’ll get the terms in writing before work starts.
Get a Free Estimate for Asphalt Driveways & Resurfacing in Tiburon
Call (866) 320-2646 to book a free on-site estimate for asphalt driveways & resurfacing in Tiburon. A live person answers around the clock, so you won’t hit voicemail. On the call we’ll set a visit, measure your lot, test the base, and hand you a written line-item price with no change-order surprises. Bring your questions about access, drainage, and how soon you can park on it.
Written by the team at Groundwork Construction Co.