Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ADU Site Prep & Utilities in Tiburon, CA: What It Involves and What It Costs
ADU site prep and utilities in Tiburon runs $45,000 – $130,000 for the excavation, grading, foundation work, and utility trenching that happen before a single wall goes up on a detached unit. On this peninsula, that number is driven less by the concrete and pipe than by how anything gets to the site in the first place. Most jobs we scope here take 6 – 10 weeks from first dig to final inspection sign-off. Call (866) 320-2646 for a free on-site estimate.
How we run site prep and utility work, start to finish
The sequence matters more than any single phase. Getting it out of order in Tiburon means re-inspecting, re-excavating, or worse, discovering a utility conflict after the foundation is poured.
Stage 1: Site walk and utility locate (days 1 – 3)
We walk the lot with you, mark the proposed footprint, and call for the underground utility locate through 811. On hillside streets above downtown Tiburon, this is also where we map access: where a mini-excavator can physically fit, where spoils can be staged, and whether a crane pick or pump truck is needed. By day three you have a marked lot and a written access plan. You decide the footprint location at this stage, so choose carefully; moving it later means re-engineering the foundation.
Stage 2: Demolition, clearing, and grading (week 2 – 3)
We remove any existing deck, shed, or hardscape in the way, strip topsoil, and cut the grade to the engineered elevation. On steep Belvedere-Tiburon lots, this often means a retaining wall goes in before anything else. We compact and proof-roll the subgrade, then the geotechnical inspector signs off. You’ll choose your retaining wall material here (concrete, segmental block, or timber) and that decision swings the budget by thousands.
Stage 3: Foundation and utility rough-in (weeks 3 – 6)
Footings are formed and poured, then the utility trenches go in: sewer lateral tie-in, water service, electrical conduit, and gas line if you’re running one. Trench depth and slope are engineered, not eyeballed. This is the phase where we coordinate the building inspector and the utility company’s own inspection. You’ll decide at this point whether the ADU gets its own electrical meter or sub-panel off the main house, which affects cost and, sometimes, your utility company’s requirements.
Stage 4: Backfill, compaction, and slab or crawl space (weeks 6 – 8)
Once under-slab inspections pass, we backfill in lifts, compact to engineered density, and pour the slab or build the crawl space. On sloped Tiburon lots, crawl space is the usual choice because it gives you a place to run future utilities and handles grade changes better than a flat slab. You’ll choose here between a slab and a raised foundation; the raised option costs more upfront but simplifies plumbing access down the road.
Stage 5: Final grade, drainage, and inspection sign-off (weeks 8 – 10)
We finish grade around the foundation, install drainage and downspout tie-ins, and complete the final inspections. You walk the site with us, and we hand off the as-built utility map. That map is worth keeping, because the next contractor who works on the ADU will want to know exactly where everything runs.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually make
Site work on an ADU is not a single decision; it’s a handful of them, each with a real trade-off:
- Foundation type (slab vs. raised crawl space): A slab is faster and cheaper, but on a sloped Tiburon site it can force awkward retaining. A crawl space costs more but handles grade and gives plumbers easy access later.
- Retaining wall material: Poured concrete lasts longest and handles the most load; segmental block is faster to install and easier to repair; timber is cheapest but has the shortest life in our wet-fog cycling.
- Utility route (direct-bury vs. conduit): Conduit costs more but makes repairs and future upgrades possible without digging. On a tight lot, that flexibility is often worth the premium.
- Drainage system: French drains, channel drains, and downspout tie-ins all handle water differently. On a hillside with our winter rain, undersizing drainage is a costly mistake.
- Sewer tie-in method: A gravity tie-in is ideal, but where grade won’t allow it, a grinder pump is the fallback. That’s a real added cost and a maintenance item you should know about before you commit.
What ADU site prep and utilities costs in Tiburon, CA
For the site prep and utility scope alone, Tiburon jobs land between $45,000 and $130,000. The low end is a relatively flat lot with straightforward access and existing utility proximity; the high end is a steep, tight-access hillside where a crane pick or pump truck is required and retaining walls are extensive.
Five variables push the number:
- Access: Whether a dumpster, concrete truck, or excavator can physically reach the site. If not, the crane or pump adds cost and schedule.
- Slope and soil: Steeper lots need more grading, shoring, and retaining wall; poor or expansive soil can require over-excavation and import.
- Utility distance: How far the ADU sits from the existing sewer, water, and electrical tie-ins determines trench length and trench difficulty.
- Foundation and wall choice: Slab vs. crawl, concrete vs. block, all move the total by thousands.
- Permit scope: Site work often triggers grading, drainage, and sometimes geotechnical review. On a steep lot, those reviews add time and fees.
A written estimate from us includes excavation, grading, foundation, utility trenching and tie-ins, inspections, and drainage. It typically does not include the ADU structure itself, finish work, or landscape restoration.
See the difference
Before
After
Before
After
Before
AfterWhat Tiburon’s hillsides and harbor air do to this job
Tiburon is a steep-hillside peninsula town, and nearly every ADU site here is really a site-engineering problem before it’s a construction problem. On the winding streets above Main Street and around Belvedere, narrow access, tight lots, and waterfront exposure mean grading, retaining walls, shoring, and staging logistics drive cost and schedule more than the finishes do. A dumpster or concrete truck that can’t reach the site has to be replaced by a crane pick or a long pump run, and that reality separates a Tiburon ADU site from one on a flatter lot in Corte Madera or San Rafael.
The housing stock adds to it. We work around early-1900s shingle and stucco cottages near downtown and mid-century hillside homes with cantilevered decks, plus larger waterfront estates on the peninsula. Many of these lots predate current drainage standards, so we often find old downspouts and improvised drainage that have to be corrected before we can finish grade. The salt air off Richardson Bay also corrodes fasteners and flashing faster here, so we spec stainless and coated hardware where it counts; you’ll see the difference a decade out. If the wider project is part of a full Home Additions & ADU in Tiburon plan, we coordinate this site scope with the structure and design phases so nothing gets rebuilt twice.
Serving Tiburon, CA – Our Local Coverage Area
We serve Tiburon and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – ADU Site Prep & Utilities in Tiburon
Most Tiburon jobs run 6 – 10 weeks from first excavation to final inspection, with steep or tight-access lots at the longer end. Call (866) 320-2646 for a schedule based on your specific lot.
Yes, nearly always. Grading, foundation, and utility tie-ins require permits and inspections, and on steep Tiburon lots a geotechnical review is common. We pull the permits and coordinate every inspection so you’re not chasing paperwork.
Sometimes, but it depends on where the ADU footprint lands relative to existing lines. When the site allows, we tie into existing utilities with minimal relocation; when it doesn’t, we’ll tell you upfront what moving them costs.
Site prep and utilities run $45,000 – $130,000 here, driven mostly by access, slope, utility distance, and foundation choice. Call (866) 320-2646 for an exact quote; estimates are free.
All our site prep and utility work is backed by the 730-Day Done Right Promise: if it isn’t done right, we make it right. You also get the as-built utility map when we finish.
Get a free on-site estimate for your Tiburon ADU site work
Every Tiburon lot is different, and the only way to price yours honestly is to stand on it. We’ll walk the site with you, check access and utility routes, and hand you a written line-item estimate with no change-order surprises. Call (866) 320-2646 to schedule your free estimate. Homeowners often pair this with Small & Partial Kitchen Remodels in Tiburon or Full Bathroom Remodeling in Tiburon, and the same team can scope it as part of our Home Additions & ADU service. We cover Tiburon and the surrounding hills.
Written by the team at Groundwork Construction Co.