Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Installation in San Bruno, CA: What It Takes
Window installation in San Bruno runs $4,500 to $15,000 for a typical whole-house replacement, and most homes are done in one to three days. The number moves with window count, frame material, and whether we’re cutting new openings or matching the existing rough openings in a post-war tract home. Call (866) 320-2646 for a free on-site estimate and a written, line-item quote before anything gets ordered.
How our window installation process actually runs
A window job has five real stages, and each one has a decision the homeowner owns. Here’s the honest sequence.
Stage 1: Measure and confirm (day 1, roughly 90 minutes)
We measure every opening, check for rot in the surrounding sheathing and trim (which San Bruno’s fog belt makes common), and photograph the sills. You decide then whether damaged trim and sheathing are in scope, because a window that seals tight into a soft, wet frame won’t stay sealed for long.
Stage 2: Order and lead time (2 to 6 weeks)
Standard sizes from a manufacturer like ECO Window Systems or ViewLux arrive faster than custom geometry. You sign off on glass package, frame color, and grille pattern at this stage. Nothing gets fabricated until you approve the spec sheet in writing.
Stage 3: Site protection and demo (day of install, first 1 to 2 hours per opening)
Furniture drops under plastic, floors get ram board, and old units come out window by window. We work one room at a time so your house stays usable. The old sashes, screens, and any failed flashing come off before anything new goes in.
Stage 4: Install, flash, and seal (the bulk of the job)
New units get shimmed, plumbed, and fastened, then flashed at the head, jambs, and sill. On the marine-layer side of the Peninsula, flashing detail is where a window job lives or dies. We back-seal and caulk with a high-grade exterior sealant before interior trim goes back on.
Stage 5: Trim, insulate, and walk-through (finishes, then inspection if required)
Gaps get low-expansion foam, interior trim gets reinstalled, and we test every unit for smooth operation and latch alignment. If your project touches structural openings or triggers a permit, we schedule the inspection and stay on it. You get a walk-through, a cleanup, and the 730-Day Done Right Promise in writing. If it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between
Window installation isn’t one product. These are the real trade-offs that change what you buy.
- Vinyl frames: the budget default for most San Bruno tract homes, low maintenance, resists the damp, but limits frame color and offers fewer large-panel options.
- Fiberglass: stiffer and better at holding its shape through temperature swings, a mid-range step up, worth it on wider openings.
- Wood-clad (aluminum exterior, wood interior): the premium look, holds up to the coast, costs more and needs careful maintenance at the joints.
- Dual-pane vs. triple-pane glass: dual-pane is right for most San Bruno homes; triple-pane earns its cost only on wind-exposed walls facing the Pacific.
- Fixed vs. operable units: fixed windows cost less, but operable units give you ventilation the fog belt actually rewards.
- Tempered or laminated glass: required in some locations near doors and low sills, and worth asking about where security matters.
What window installation costs in San Bruno, CA
Whole-house window installation in San Bruno lands between $4,500 and $15,000 for standard replacement, and $8,000 to $25,000 when you step up to impact-grade or high-performance units. Here’s what pushes a job to the low or high end.
| Factor | How it moves the price |
|---|---|
| Window count and size | More and larger units raise material and labor proportionally. |
| Frame material | Vinyl is the low end; fiberglass and wood-clad climb higher. |
| Existing condition | Rotten sheathing, failed flashing, or settling adds prep work. |
| Glass package | Triple-pane or impact glass adds cost but improves performance. |
| Permit and inspection scope | Structural opening changes require permits and add time and fees. |
A written estimate spells out unit brand and model, glass spec, flashing and trim labor, disposal, and whether permits are included. What typically isn’t included: unforeseen rot repair, interior paint, and exterior finish matching. Upfront pricing, no surprises – the number you see is the number you pay, plus any change order you approve in writing first.
See the difference
Before
After
Before
After
Before
AfterWhat San Bruno homes specifically do to this job
The defining fact here is the 2010 PG&E gas pipeline explosion in the Crestmoor neighborhood. That disaster triggered a mandatory seismic retrofit and rebuilding wave that still shapes San Bruno’s permits and inspections today. The result is a real split in the housing stock: newer seismic-compliant homes rebuilt after the event, sitting beside 1940s and 1950s post-war homes that still carry original wood frames, single-pane glass, and tired sheathing. On those older homes, window installation is often a rot-repair job in disguise. The fog belt and steady onshore winds make it worse – exterior sheathing and trim soak up moisture and fail quietly, so proper flashing at the sill and head matters more here than in drier towns. We work all over San Bruno, from the Crestmoor blocks to the homes closer to El Camino, and we know what the inspectors here expect.
Serving San Bruno, CA – Our Local Coverage Area
We serve San Bruno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: window installation in San Bruno
A whole-house job usually takes one to three days once materials are on site, and the ordering lead time is two to six weeks. Single rooms may be done in a few hours. Call (866) 320-2646 for a timetable tied to your specific home.
Direct like-for-like window replacement often doesn’t require a permit, but changing sizes, cutting new openings, or altering structure does, and San Bruno’s post-2010 oversight means we confirm every scope before starting. We tell you up front whether permits apply and pull them when they do.
In most cases yes. Standard replacement keeps the existing rough opening and doesn’t touch plumbing or framing. Only a size or configuration change crosses that line, and we flag it before you commit.
Expect $4,500 to $15,000 for standard replacement and $8,000 to $25,000 for high-performance or impact units. Final numbers depend on count, material, and condition. Call (866) 320-2646 for an exact quote – estimates are free.
Every window installation is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right. Manufacturer warranties on the units come on top of that. We put both in writing.
Ready for a real number on window installation in San Bruno?
Call Groundwork Construction Co. of San Francisco at (866) 320-2646 to book a free on-site estimate for window installation in San Bruno. A live person answers, 24/7. We measure, walk the whole scope with you, and hand you a written line-item quote – the number you see is the number you pay. If windows are part of a bigger Windows & Doors in San Bruno plan, or you’ve also been meaning to look at a Wood Fence in San Bruno, we can scope it all in one visit.
For the wider project, our Windows & Doors service covers every opening. Homeowners across San Bruno often pair their window work with a Chain Link Fence in San Bruno to finish the yard at the same time.
Written by the team at Groundwork Construction Co.