Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Door Installation in San Bruno, CA: What It Takes and What It Costs
Door installation in San Bruno, CA runs $650 to $3,800 per door for most projects we quote, with a same-day turnaround on a standard interior or exterior swap and two to three days when framing, casing, or a permit is involved. The range covers everything from a hall closet door hung in an afternoon to a weather-sealed exterior entry set into new framing on one of the postwar homes near Crestmoor. Call (866) 320-2646 and we’ll walk you through the exact scope in ten minutes.
Most San Bruno homeowners come to us with a specific problem: a door that sticks, swells, or leaks, or a house full of 1940s hollow-core doors that no longer close the way they should.
How We Run a Door Installation Job, Stage by Stage
Every door we install moves through the same five stages. The durations below are what a typical San Bruno job actually takes, not the best-case scenario.
Stage 1: On-Site Measure and Condition Check (Day 1, 45 – 60 minutes)
We measure the rough opening, check the plumb of the jamb, and look at what’s behind the existing trim. On older 94066 homes, that last part matters more than the tape measure. Original sheathing, settled framing, and decades of paint buildup all change whether a new door drops cleanly into the opening or needs a sistered stud or a rebuilt jamb. You decide on the door style, hardware finish, and whether you’re keeping or replacing the casing at this visit.
Stage 2: Product Selection and Order Confirmation (Day 1 – 2)
We confirm the door type, material, and hardware, then place the order. Standard interior slabs and pre-hung units move fast. Custom-sized exterior doors, and anything in the Andersen or Marvin catalog, take longer. We give you a written product spec before we order so there are no surprises on the invoice.
Stage 3: Demo and Opening Prep (Job Day 1, 2 – 4 hours)
We pull the old door and trim, inspect for rot or failed flashing, and rebuild the opening if needed. On exterior doors in San Bruno’s fog belt, this is where we find the moisture damage that was hiding behind the casing. Any rotted sheathing gets replaced before a new door goes in.
Stage 4: Install and Seal (Job Day 1 – 2, 3 – 5 hours)
The door goes in, we shim and plumb it, set the hinges, and tune the strike so it latches on the first push. Exterior doors get new flashing and a full weather seal at the sill and threshold. We test the swing and the lock set before we call it closed.
Stage 5: Trim, Inspection, and Walkthrough (Job Day 2 – 3, 2 – 3 hours)
Casing goes back on, we fill and sand the nail holes, and if your job requires a permit, we schedule the inspection and meet the inspector. You walk the door with us, test the swing, and confirm the hardware. Any adjustment is handled before we leave.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between
The doors you pick determine how long this job lasts and how well it holds up against San Bruno’s marine layer. Here’s what we actually put in front of homeowners:
- Hollow-core interior doors: The budget standard for bedrooms and closets. They swing fine and keep the price low, but they don’t dampen sound and they dent. Right call for a rental or a closet you never think about.
- Solid-core interior doors: A step up in weight and quiet. The trade-off is cost, roughly double the hollow-core price. Worth it for a primary bedroom or a home office where noise carries.
- Fiberglass exterior doors: Resists moisture, won’t rot, and handles San Bruno’s damp air better than wood. Takes paint cleanly. The trade-off is that it can look a little flat compared to real wood grain.
- Steel exterior doors: Secure and low-maintenance, good for a front entry. Prone to denting and can transfer heat and cold more than fiberglass. Fine for a service door or garage side entry.
- Wood exterior doors: The premium look, and the one that needs the most attention. In the fog belt, an exterior wood door needs annual finishing or it’ll swell and split. We recommend it where the style matters more than the upkeep.
- Hardware and finish: Knobs, levers, deadbolts, and hinges run $60 to $400 per door. A keyed-alike set on your exterior doors is worth the small upgrade.
What Door Installation Costs in San Bruno, CA
A standard interior door installation in San Bruno runs $650 to $1,400 installed. An exterior entry door with new flashing and weather sealing lands between $1,800 and $3,800. Here’s how the line items break down:
| Line item | Typical range |
|---|---|
| Interior door, standard size, pre-hung | $650 – $1,400 |
| Solid-core interior door | $900 – $1,800 |
| Exterior entry door, fiberglass or steel | $1,800 – $3,200 |
| Exterior wood door with new flashing | $2,400 – $3,800 |
| Hardware and finish per door | $60 – $400 |
| Framing rebuild or rotor repair | $300 – $900 |
Five variables push a job to the high end. Existing condition is the big one: a door that drops into a clean, plumb opening is cheap; one that needs a sistered stud and new sheathing isn’t. Door size matters, since oversize or custom widths cost more. Material grade moves the number by hundreds. Relocating a door to a new spot in the wall adds framing and drywall work. And a permit, which some exterior and structural openings require, adds inspection time and the fee itself.
A written estimate from us is line-item, not a lump sum. It lists the door, hardware, framing work, finish work, and permit fee separately, so you can see exactly what you’re paying for. What it doesn’t cover is any change you make after ordering. We lock the price before we order the door and don’t issue change orders mid-job unless you ask for a scope change. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat San Bruno Homes Specifically Do to This Job
San Bruno’s housing stock is the single biggest factor in how a door installation here goes. Crestmoor and the surrounding blocks are dominated by postwar single-family homes built in the 1940s and 1950s, and a large share of those were rebuilt or heavily retrofitted after the 2010 PG&E pipeline explosion. That means when we open up a wall next to your front door, we may find original 1940s sheathing or a newer, seismic-compliant wall assembly built after the explosion. Which one we find determines whether a job stays on schedule or grows by half a day.
The city’s post-2010 seismic requirements and the PG&E gas line clearance procedures around Crestmoor also affect door jobs, though less than a foundation or a dig project would. A door relocation that touches the wall near a gas line can trigger a clearance check. Add the fog belt and steady onshore winds from the Pacific, and exterior wood doors in San Bruno take a beating on their weather-facing edge. We seal exterior doors with flashing and a full threshold detail every time, because a door that isn’t sealed here will rot its jamb within a few seasons.
We cover all of San Bruno, and door installation is one piece of the wider work we do. If your project grows into a full exterior refresh, it’s part of a full Windows & Doors in San Bruno scope, and you can see the whole picture on our Windows & Doors service page. Homeowners often pair a new front door with Chain Link Fence in San Bruno or a Vinyl Fence in San Bruno when they’re reworking the front approach at the same time.
Serving San Bruno, CA – Our Local Coverage Area
We serve San Bruno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Door Installation in San Bruno
A standard interior door is installed in three to five hours and finished the same day. An exterior door with new flashing and sealing runs one to two days, and a door that needs framing rebuilt can push to three. Call (866) 320-2646 for a schedule based on your specific doors – estimates are free.
A straight replacement in an existing opening usually doesn’t require a permit. Widening an opening, cutting a new one in a structural wall, or relocating a door does, and so can exterior doors on homes in the post-2010 retrofit zones. We check the permit requirement for your address before we quote and pull it for you if it’s needed.
Yes, and that’s the vast majority of what we do. Replacing a door in the same opening keeps the job to demo, install, and finish. Moving a door means new framing, drywall patching, and paint, which adds $400 to $1,200 to the job. We tell you which one you’re getting before we start.
Plan on $650 to $1,400 for an interior door and $1,800 to $3,800 for an exterior entry door, installed and finished. The high end reflects wood doors, new flashing, and framing repair. Call (866) 320-2646 for an exact quote – estimates are free.
Every door we install is covered by our 730-Day Done Right Promise. If a door we hung stops latching, sags on its hinges, or leaks at the threshold within that window, we come back and make it right. The door and hardware manufacturer warranties stack on top of that.
Get a Free Door Installation Estimate in San Bruno
If you have a door that sticks, leaks, or just needs replacing, call Groundwork Construction Co. at (866) 320-2646. We’ll schedule a free on-site estimate, measure the opening, check for rot and framing issues, and hand you a written line-item quote with the door, hardware, and labor priced separately. A live person answers around the clock, so you won’t hit a voicemail. Every project carries the 730-Day Done Right Promise.
Written by the team at Groundwork Construction Co.