Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Impact Windows & Doors in San Bruno, CA: What the Job Actually Involves
Impact windows and doors in San Bruno typically run $8,000 – $25,000 for a full-house installation, with most single-family jobs landing in the $11,000 – $18,000 range once permits and trim work are counted. A typical house takes three to five working days from demolition to final inspection. The number that matters most is how much of your original 1940s or 1950s framing has to be rebuilt before the new units go in. Call (866) 320-2646 and we’ll walk your openings on site, free.
How We Install Impact Windows & Doors, Step by Step
Day 1: Measure, verify, and pull the permit. Before anyone touches a window, we confirm every rough opening against the order sheet. On the post-war homes common in San Bruno, this is where we find out whether a “standard” size actually fits, or whether the original framing has shifted enough to require custom units. You decide here: stock sizes with a faster lead time, or custom to match the existing openings exactly. Permit paperwork goes to the city the same week.
Days 2 – 3: Demo and prep. Old units come out, and this is the stage nobody warns you about. The original wood sheathing behind a 1950s window is often soft where the marine fog has been working on it. We cut back rot to sound material, reframe as needed, and flash every opening properly before the new unit goes in. You’ll see photos of what we found at each stage. No surprises on the invoice.
Days 3 – 4: Set and seal. New impact units go in, shimmed, leveled, and anchored to the framing. We seal the perimeter with the correct flashing sequence for a coastal climate: sill pan first, then weather barrier, then the window, then the head flashing. This is the difference between a window that stays dry for 30 years and one that leaks at year six.
Day 4: Trim, finish, and door hanging. Interior and exterior trim get installed and caulked. If you’re replacing doors at the same time, this is when they’re hung and the hardware gets set. You choose trim profile and finish now, not later.
Day 5: Inspection and walkthrough. The city inspects the installation. We walk every opening with you, demonstrate the locking hardware, and hand over the warranty paperwork. Your 730-Day Done Right Promise starts here, and it covers labor, not just the window unit itself.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Impact Window and Door Options You’ll Choose Between
- Frame material: vinyl vs. aluminum vs. fiberglass. Vinyl is the most common choice and the most affordable, but it can warp in extreme heat and it doesn’t match historic trim profiles well. Aluminum is thinner and stronger, which lets you match original sightlines on older San Bruno homes, but it conducts heat. Fiberglass sits in the middle: stable, paintable, and strong, at a higher price.
- Glass package: laminated impact glass vs. standard laminated vs. tempered. Laminated impact glass holds together on impact and is the standard for true impact-rated units. Standard laminated gives you the impact hold without the full rating. Tempered is safer than annealed glass but shatters into pebbles on impact and isn’t impact-rated.
- U-factor and solar heat gain. On a fog-belt property, you want a low U-factor to hold heat in, and a moderate solar heat gain number so the few sunny afternoons don’t turn the living room into an oven. Low-E coatings on the right glass make a real difference here.
- Door type: sliding glass, French, or swing. Sliding patio doors are the practical choice for most San Bruno homes. French doors look better on a period-appropriate facade but take more wall space to swing open, and swing doors need a solid jamb to anchor into.
- Hardware and finish. Impact-rated locks and multipoint hardware cost more, but they’re what makes the rating meaningful. Finish matters more than people think on a coastal property; standard painted steel corrodes faster than stainless or powder-coated aluminum.
What Impact Windows and Doors Cost in San Bruno, CA
| Line Item | Typical Range |
|---|---|
| Full-house impact window installation | $8,000 – $25,000 |
| Impact-rated exterior door (per door) | $1,200 – $3,500 |
| Permits and inspection fees | $400 – $1,200 |
| Framing repair and rot remediation (if found) | $300 – $2,000 |
| Interior and exterior trim and finish | $800 – $2,500 |
Five things push a job toward the high end of that range: the number of openings, whether the existing frames are square and sound, whether the units are custom or stock, the glass and hardware spec, and how much original sheathing needs replacing. A straightforward swap in a well-maintained home lands near the bottom. A 1950s home with soft framing and custom-sized openings lands near the top.
Your written estimate is line-itemed: units, labor, permits, disposal, and trim, each on its own line. What’s not included – unforeseen structural repair behind a wall – gets priced and approved before we touch it, in writing, with no change-order surprises. That’s what upfront pricing means here.
See the difference
Before
After
Before
After
Before
AfterWhat San Bruno’s Housing Stock Does to This Job
San Bruno is a city still shaped by 2010. The PG&E gas pipeline explosion in the Crestmoor neighborhood triggered a mandatory seismic retrofit and rebuilding wave that continues to move through the city’s permits and inspections today. What that means for impact windows and doors: homes in Crestmoor and the surrounding blocks split into two groups. Some were rebuilt or extensively retrofitted after 2010 and now have modern, seismic-compliant framing that’s straightforward to work with. Others are still original post-WWII single-family homes, built in the 1940s and 50s, that were never retrofitted and still need foundation bolting, shear walling, and chimney bracing.
On that second group, an impact window job is often the first time anyone has opened up the wall and looked at the framing. Plan for that. The marine fog that sits over the Peninsula most of the year has been working on original wood sheathing, trim, and sills for seventy years, and rot at the window openings is common. Proper flashing sequence and weather-resistant detailing aren’t upsells here; they’re the difference between a window that holds and one that fails early.
On the permit side, contractors working in the 94066 zip need to be familiar with the city’s post-2010 seismic retrofit requirements and the PG&E gas line clearance procedures that can stall work near the Crestmoor blast zone. We pull the permit and coordinate the inspection; you don’t need to learn the codebook.
Serving San Bruno, CA – Our Local Coverage Area
We serve San Bruno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked: Impact Windows & Doors in San Bruno
A typical single-family home takes three to five working days once materials arrive and the permit is issued. Permit issuance itself usually adds one to two weeks. Custom units add lead time of four to eight weeks before install day; stock units can be much faster. Call (866) 320-2646 for an exact timeline on your house.
Yes. Window and door replacements in San Bruno require a permit, and the installation must pass a city inspection. We handle the permit application and the inspection scheduling. You don’t need to file anything yourself. Call (866) 320-2646 and we’ll explain exactly what the permit covers on your project.
In most cases, yes. Impact windows and doors go into existing openings, so plumbing and structure stay put. What can change is the framing around the opening, and occasionally that requires a small structural repair if the original header has sagged. We flag that before work starts, price it, and get your approval.
Full-house impact window installation in San Bruno runs $8,000 – $25,000, with most jobs landing between $11,000 and $18,000 once permits and trim are included. Cost depends on opening count, custom vs. stock sizing, glass package, and how much framing repair the house needs. Call (866) 320-2646 for an exact quote – estimates are free.
Every impact window and door job we install is covered by our 730-Day Done Right Promise. If something isn’t right, we make it right, for two full years. That covers labor and installation, on top of whatever manufacturer warranty comes with the window unit itself. Call (866) 320-2646 and we’ll walk you through the details.
Get a Free Estimate for Impact Windows & Doors in San Bruno
Call (866) 320-2646 to schedule a free on-site estimate for impact windows and doors in San Bruno. We’ll measure every opening, check the framing, and hand you a written line-item quote with no surprises. This job is often part of a full Windows & Doors in San Bruno project, and homeowners in the area also pair it with an Aluminum Fence in San Bruno or an Iron Fence in San Bruno to finish the exterior. See our wider Windows & Doors service and our San Bruno service area page for the full picture. Call today; a live person answers 24/7.
Written by the team at Groundwork Construction Co.