Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in San Bruno, CA: What It Costs and How Long It Takes
An aluminum fence for a typical San Bruno lot runs $3,500 to $9,000, with most of that going to linear footage, height, and how many gates you’re cutting in. A straightforward side-yard or front-property run is usually a two-to-three-day job; a full perimeter with multiple gates takes closer to a week. Call (866) 320-2646 for a free on-site estimate and a written line-item quote, so you’re pricing your actual yard, not a guess.
How We Build an Aluminum Fence in San Bruno, Start to Finish
Aluminum fencing looks simple from the street. The work that makes it last is under the ground and in the layout, and that’s where most of the job actually lives.
Stage 1: On-site measure and layout (day 1, half a day)
We walk the property line, confirm where the fence can legally sit, and check for buried utilities before anyone picks up a shovel. This is where you decide fence height, the line you want, and gate locations. In San Bruno’s 94066, any digging near a known gas main requires utility clearance, and that check happens before layout is finalized, not after.
Stage 2: Permits and HOA (days 1 – 5, depending on the city)
Most aluminum fence runs in San Bruno above a few feet of height need a permit, and HOA review can add a week or more. You’ll decide the renderings and specs you submit. We pull the permit and handle the inspection scheduling.
Stage 3: Demo and prep (day 2, one day)
Old fencing comes out, posts are set on the layout, and footing holes are dug to depth. This is the messiest day. On post-and-panel aluminum, footing depth and concrete cure time are the two things you can’t rush.
Stage 4: Panel and gate install (days 2 – 4)
Panels go up, gates get hung and aligned, and hardware gets checked for smooth swing and latch. You decide gate style, latch type, and whether you want self-closing hardware.
Stage 5: Walkthrough and cleanup (day 4, a couple hours)
We walk the line with you, check every gate, and clean up the site. Any punch items get fixed before we leave. Our technicians have up to 12 years of experience, and every job is backed by the 730-Day Done Right Promise: if it’s not done right, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Aluminum Fence Choices You’ll Actually Make
- Residential-grade vs. heavier commercial-grade aluminum. Residential panels are lighter and cost less; commercial-grade holds up better to wind and impact but pushes the price up. For most San Bruno side and front yards, residential-grade is the right call unless you’re fencing a street-facing corner lot.
- Powder-coated finish vs. bare mill finish. Powder coating is what keeps aluminum looking sharp in coastal air. Bare finish oxidizes and dulls faster. Powder coat adds cost but is the finish we recommend given San Bruno’s fog belt.
- Rackable vs. level panels. Sloped yards need rackable panels that follow the grade. Level panels on a slope leave visible gaps. Most post-WWII San Bruno lots have some slope, so this matters more than people expect.
- Picket spacing and height. A 4-foot decorative fence for a front yard with wide picket spacing, or a 6-foot privacy-oriented aluminum panel with tighter spacing in back. Spacing and height both drive material cost.
- Gate hardware. Standard latch and hinges vs. self-closing, self-latching hardware. The latter is worth it if you have kids or a pool.
- Brand and gauge. Aluminum gauge and coating quality vary between manufacturers. We source from established fence brands with published specs on gauge and coating. GAF and CertainTeed are brand partners across our other exterior trades; for aluminum fencing, we specify the manufacturer on your written quote so you can check the specs yourself.
What Aluminum Fence Costs in San Bruno, CA
The lead range for this job is $3,500 to $9,000. That’s a real range for real San Bruno yards, and here’s what moves a job toward one end or the other.
- Linear footage. The biggest single driver. A 60-foot side-yard run sits near the low end; a full 200-foot perimeter sits near the high end.
- Height and grade. A 4-foot decorative run is cheaper than a 6-foot panel system. Rackable panels for a sloped yard add cost over flat-ground installs.
- Gate count and hardware. Each gate is its own line item. Self-closing hardware adds a bit more.
- Site access and demo. Tearing out old fencing, moving materials around a tight lot, or digging near utilities pushes labor up.
- Permit scope. A simple residential permit is modest. HOA submittals and any special inspection requirements add time and cost.
Your written quote includes panels, posts, footings, concrete, gates, hardware, and labor. What it typically doesn’t include: old fence removal if that’s charged separately (we’ll state it on the quote), HOA fees, and any landscaping repair after digging. That’s what upfront pricing means here. The number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhat San Bruno Homes Specifically Do to This Job
San Bruno’s construction landscape changed after the 2010 PG&E gas pipeline explosion in Crestmoor. The mandatory seismic retrofit and rebuilding wave that followed still shapes how permits, inspections, and digging get handled here. Contractors working in 94066 need to be familiar with the city’s rigorous post-2010 seismic requirements and the PG&E gas line clearance procedures near the blast zone, which is why we check utility locations before we touch the ground.
The housing stock matters too. Crestmoor and the surrounding neighborhoods are mostly post-WWII single-family homes from the 1940s and ’50s, with a large share rebuilt or retrofitted after 2010. That mix means we often encounter newer, code-compliant property lines next to older homes whose grading and setbacks haven’t moved. And with San Bruno’s fog belt and steady onshore wind, aluminum gets a real test. Powder-coated aluminum outlasts wood in this climate by a wide margin because there’s no rot and no moisture intrusion to manage, which is why it’s a common pick for exterior boundaries around here. If fencing is one piece of a larger exterior project, our Fence Installation in San Bruno page covers the full scope, and homeowners often pair this with Driveway Repair & Replacement in San Bruno or Patios, Walkways & Pool Decks in San Bruno to finish off the yard in one pass.
We handle aluminum fence work throughout San Bruno, including Crestmoor and the surrounding hillside streets. For the broader project scope, see our Fence Installation service hub or call us directly.
Serving San Bruno, CA – Our Local Coverage Area
We serve San Bruno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked, Aluminum Fence in San Bruno
Most aluminum fence jobs in San Bruno take two to four days of on-site work once permits are in hand. Permit and HOA review can add a week or more on the front end. Call (866) 320-2646 for an exact timeline on your property.
Yes, in most cases. Fences above a few feet of height, or any fence near a property line, typically require a permit in San Bruno’s 94066 zip. We pull the permit and schedule the inspection. Call to confirm what your specific project requires.
Yes. Aluminum fence footings are shallow post holes, not trenching. The one thing we always check is buried utility location, including gas lines, before any digging. We schedule that check on every job. Call (866) 320-2646 to set up your estimate.
Most San Bruno aluminum fence projects run $3,500 to $9,000. Linear footage, height, gate count, and site access are the main drivers. Your written quote from us lists every line item. Call (866) 320-2646 for a free estimate.
Every aluminum fence job we do is covered by the 730-Day Done Right Promise: if something isn’t done right, we make it right. That covers workmanship. Manufacturer finishes carry their own product warranties, which we document on your quote. Call for details.
Get a Free Aluminum Fence Estimate in San Bruno
Call (866) 320-2646 to schedule a free on-site estimate for aluminum fence in San Bruno. A live person answers, 24/7, and we’ll walk your property line, check utilities, and leave you with a written line-item quote with no surprises. Estimates are free, and financing at 0% for 18 months is available, with $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co.