Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
ADU Design & Permitting in San Bruno: What It Takes From First Sketch to Final Sign-Off
ADU Design & Permitting in San Bruno means taking a detached unit or attached addition from feasibility through stamped drawings, city plan check, and permit issuance before a single board is cut. Expect the design and permitting phase alone to run 8 to 16 weeks on a straightforward project, with total design and permitting costs typically landing between $18,000 and $45,000 depending on unit size and site constraints. The finished build itself falls in the $90,000 to $220,000 range for construction. Call (866) 320-2646 to talk through where your property sits before you commit a dollar.
How the design and permitting process actually moves
Permitting is the part of an ADU that either protects your budget or quietly eats it. Here’s the sequence we follow, stage by stage, so you know what you’re deciding and when.
Stage 1: Site and feasibility review (week 1)
We walk the lot, measure setbacks, and check zoning against what you actually want to build. You decide the rough unit type and footprint now, because everything downstream depends on it. This is also where we flag utility clearances and existing survey gaps that could add weeks later.
Stage 2: Schematic design (weeks 2 through 4)
Your architect or designer produces floor plans, elevations, and a site plan. You’ll pick the layout here: one bedroom versus studio, kitchen placement, bathroom count, and where the unit connects to the main house if it’s attached. Change your mind at this stage, not during plan check.
Stage 3: Design development and engineering (weeks 4 through 8)
Structural, energy compliance, and Title 24 calcs get folded in. You’re choosing finishes and systems now, because they affect load calculations and the energy report. This is the stretch where clients most often underestimate decision load.
Stage 4: Permit submittal and plan check (weeks 8 through 14)
We submit a full package and respond to city comments as they come back. You’ll approve any revisions the plan checker requires. San Bruno plan check doesn’t run on a fixed clock, so we track comments closely rather than waiting for a callback.
Stage 5: Permit issuance and construction handoff (weeks 14 through 16)
Once permits are issued and fees paid, the drawings become the construction set. You get a copy of everything, along with the inspection schedule. From foundation to finish line, one contractor holds the thread, which is exactly what the 730-Day Done Right Promise is built around.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The design and specification choices you’ll weigh
Most of what gets decided during ADU Design & Permitting isn’t aesthetic; it’s structural and economic. Here’s where the real trade-offs live.
- Detached versus attached configuration. A detached unit gives privacy and rental flexibility but adds utility trenching, foundation cost, and more site work. Attached units save on infrastructure but constrain layout.
- Panel capacity. Older homes often need a service upgrade to carry an ADU. That’s real money and it belongs in the permit package, not the build phase.
- Foundation type. Slab-on-grade is cheaper and faster; raised or stem-wall foundations handle sloped lots and drainage better. San Bruno’s grade varies enough that this isn’t a cookie-cutter call.
- Windows and doors. Marine-layer exposure means assemblies need real weather resistance, not builder-grade inserts. We specify with Andersen and Marvin where the budget supports it.
- Roofing and flashing. GAF and CertainTeed systems hold up well against damp, wind-driven weather, and proper flashing detailing matters more than brand on this job.
- Plumbing and HVAC routing. A heat pump water heater and mini-split system cost more upfront than legacy equipment but simplify compliance and long-run operating cost.
What ADU Design & Permitting costs in San Bruno, CA
For this phase of the work in San Bruno, expect $18,000 to $45,000 in design, engineering, and permitting costs. Overall project pricing falls in the $45,000 to $130,000 band for the addition scope, with full ADU construction landing between $90,000 and $220,000.
Five variables push a job toward the low or high end:
- Unit size and type. A studio sits near the bottom; a two-bedroom detached unit pushes toward the top.
- Site conditions. Sloped lots, tight side yards, and utility clearance issues add survey and engineering work.
- Structural complexity. Attaching to an existing home or modifying a load-bearing wall raises engineering and inspection costs.
- Utility relocation. Moving or upgrading electrical service, water, and sewer is often the single biggest design-stage variable.
- Permit scope and review cycles. More comments and more resubmittals mean more hours.
Your written estimate itemizes design, engineering, permitting fees, and submittal labor as separate line items. What it typically excludes is city permit fees themselves and any utility company charges, which we flag up front so there are no surprises. No-hassle upfront pricing: the number you see is the number you pay.
See the difference
Before
After
Before
After
Before
AfterWhy San Bruno properties make this job different
San Bruno’s construction market still carries the fingerprint of the 2010 PG&E gas pipeline explosion in Crestmoor, which set off a mandatory seismic retrofit and rebuilding wave that shapes permits, inspections, and contractor specialization in the 94066 ZIP to this day. Walk Crestmoor and the surrounding blocks and you’ll find a mix: newer, fully seismic-compliant structures next to older post-WWII homes from the 1940s and 1950s that still need foundation bolting, shear walling, or chimney bracing before an ADU gets approved. That means our design stage often runs structural retrofits in parallel with the addition drawings. Nearby, PG&E gas line clearance procedures can delay any digging, which matters when foundation and utility work are on the schedule. And the persistent fog belt sends damp, wind-driven air across every west-facing wall and roof edge, so flashing and weather-resistant detailing get specified with real attention, not defaulted to cheapest bid.
If the project is part of a full Home Additions & ADU in San Bruno scope, we sequence the retrofit and the new construction on one set of drawings rather than two.
Serving San Bruno, CA – Our Local Coverage Area
We serve San Bruno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked questions
Budget 8 to 16 weeks from kickoff to issued permit for a straightforward San Bruno unit. Detached units, sloped lots, and any retrofit work push toward the high end. Call (866) 320-2646 for a realistic schedule after we walk the property.
Yes, a permit is required, and the design drawings are what the city reviews. Skipping plan check does not save money; it creates problems at inspection and resale. We pull permits as part of the scope and see them through to final sign-off.
Often yes, but it depends on where the setbacks and existing service connections sit. Keeping the unit close to the main house’s plumbing and electrical panel is the single most reliable way to control cost. That’s a design-stage conversation, not a construction one.
Schematics, elevations, site plan, structural and energy calcs, the full submittal package, and response to every city comment. You get the complete drawing set. Our technicians have up to 12 years of experience working with local plan check, and our Home Additions & ADU team coordinates the whole package.
Every project we touch is covered by the 730-Day Done Right Promise. If the finished work isn’t right, we make it right. Many San Bruno homeowners pair this with Full Kitchen Remodeling in San Bruno or Cabinets & Countertops in San Bruno once the unit is approved.
Get a free estimate for your San Bruno ADU project
Call (866) 320-2646 for a free on-site estimate covering ADU Design & Permitting in San Bruno. We’ll review your lot, walk through zoning and setbacks, and give you a written, itemized number for design and permitting before you sign anything. Calls are answered by a live person 24/7, and projects over $10,000 qualify for $1,000 off plus 0% financing for 18 months.
Written by the team at Groundwork Construction Co.