Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Corte Madera, CA: What It Really Costs and How It’s Done
Walk-In Showers & Shower Remodeling in Corte Madera runs $9,000 – $28,000 for a full bath remodel, with the walk-in shower itself typically landing between $4,500 and $12,000 depending on size, tile, glass, and whether plumbing moves. A straightforward shower replacement is quicker and cheaper – $3,000 – $8,500 – and most Corte Madera jobs take two to four weeks from demo to final inspection. Call (866) 320-2646 to schedule a free on-site estimate.
How a Walk-In Shower Actually Gets Built: Day by Day
We don’t hand you a finish schedule and disappear. Here’s what the sequence looks like on a real Corte Madera walk-in shower project, so you know what to expect and what you’ll be deciding along the way.
Stage 1 – Demo and rough-in inspection (days 1 – 2)
We tear out the old surround, tub, or tile down to the studs and subfloor, then open the wall to verify the drain location, valve height, and whether the framing is sound. On 1950s – 70s Corte Madera homes we sometimes find galvanized supply lines or termite-damaged studs behind the tile, and that’s the moment to decide whether to replace them before the new work closes them in. You’ll confirm the shower footprint and drain placement at this stage.
Stage 2 – Plumbing and structural prep (days 3 – 5)
If you’re relocating the drain or adding a bench, niche, or second showerhead, this is when it happens. We set the pan with a sloped mortar bed or a prefabricated foam pan, then install the waterproofing membrane and flood-test it. You decide at this point whether to keep the existing valve trim or upgrade fixtures – a change that adds cost but is far easier now than after tile.
Stage 3 – Waterproofing and inspection (day 6)
We schedule the local inspection after the pan and membrane are in and tested. Corte Madera sits in a flood zone for much of the low-lying area near the creek, and inspectors here are attentive to waterproofing and drainage detail. Passing this inspection before tile goes up protects you; we don’t skip it.
Stage 4 – Tile and glass (days 7 – 12)
Tile installation is where the schedule stretches. Large-format porcelain goes faster than a mosaic or herringbone pattern; a curbless, linear-drain design takes longer than a standard curb. You’ll pick grout color and layout before day 7 so the crew isn’t waiting. Glass templating happens after tile, adding roughly five to seven business days for fabrication.
Stage 5 – Fixtures, glass install, and final walkthrough (days 13 – 18)
We set the showerhead, valve trim, grab bars if specified, and the glass panel or door, then run a full water test and a second inspection. Your final walkthrough covers caulk lines, door swing, drainage slope, and the 730-Day Done Right Promise in writing.
Full bath scope beyond the shower – flooring, vanity, lighting – runs alongside this and belongs to our Bathroom Remodeling in Corte Madera work, which we coordinate so the shower doesn’t get finished after the floor.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Choose Between Before Demo Starts
Most of the decisions happen in the two weeks before demolition. Here’s what actually moves the look and the budget:
- Curb vs. curbless: A curbless, linear-drain shower looks clean and is safer for aging in place, but it requires more framing, a recessed subfloor, and longer waterproofing time – add $1,500 – $3,500 versus a standard curb.
- Tile material: Porcelain and ceramic are the workhorses: durable, easy to clean, $8 – $20 per square foot installed. Natural stone (marble, travertine) runs $20 – $45 installed and needs sealing every year or two, which matters in a marine climate with high humidity.
- Glass: Frameless tempered glass is the premium look and costs $1,200 – $3,200 for a typical walk-in panel. Semi-frameless saves $400 – $800 and looks nearly as good.
- Prefab vs. custom pan: A prefab acrylic or fiberglass pan is fast and low-maintenance but limits your tile pattern; a custom mortar pan gives unlimited size and shape at higher cost and longer schedule.
- Fixtures: Kohler and Moen both make reliable thermostatic valves; upgrading from a basic pressure-balance valve to thermostatic adds $300 – $700 but holds temperature better on cold Marin mornings.
- Niche and bench: A recessed niche is $200 – $500 installed; a tiled bench runs $400 – $900. Both are far cheaper planned in than added later.
What Walk-In Showers & Shower Remodeling Costs in Corte Madera, CA
For this market, plan on $9,000 – $28,000 for the full bathroom scope, with the shower component typically $4,500 – $12,000. Here’s how the money breaks down on a typical Corte Madera job:
- Full walk-in shower installation (demo, waterproofing, tile, glass, fixtures): $4,500 – $12,000
- Shower replacement (like-for-like, no layout change): $3,000 – $8,500
- Tub-to-shower conversion: $3,500 – $10,000
- Vanity installation alongside the shower: $800 – $3,000
- Full bath remodel including shower, floor, vanity, lighting: $9,000 – $28,000
What pushes a shower to the high end: relocating the drain or supply lines (adds $1,200 – $3,000), a curbless linear-drain design, natural stone instead of porcelain, frameless glass, and structural surprises behind the wall. What keeps it low: a like-for-like replacement in a standard 36″×60″ alcove with a prefab pan and semi-frameless glass.
A written estimate from us lists every line – demo, rough plumbing, waterproofing, tile, glass, fixtures, permits, and disposal – so nothing appears as an “extra” mid-job. Where the pricing gets open-ended (like if existing framing is compromised), we flag the allowance upfront. If you’re comparing against a wider renovation, that’s where our Bathroom Remodeling service page fills in the rest of the picture.
See the difference
Before
After
Before
After
Before
AfterWhat Corte Madera Homes Specifically Do to a Shower Job
Corte Madera sits at the heart of the Marin County flood-plain-and-hillside split, and that shapes shower work here in ways it doesn’t in Larkspur or Mill Valley. In the low-lying flats near Corte Madera Creek and the Town Center/marsh areas, homes sit in a FEMA flood zone with elevation and drainage requirements – which means any project that touches flooring or wall assemblies may trigger a waterproofing and drainage review that hillside jobs just blocks away never see. The housing stock makes it concrete: mid-century ranchers and split-levels from the 1950s – 70s, many now gutted and rebuilt into larger two-story customs, which means we’re often opening walls on original framing and finding galvanized lines, shallow pans, and decades of moisture damage behind old tile. On the hillside lots above town, seasonal drainage and erosion during wet winters push moisture into shower walls from the exterior side, so we spec membranes and backer systems accordingly. Mill Valley neighbors often pair their projects with Roof Replacement & Installation in Corte Madera when a bathroom opens up the ceiling cavity.
Serving Corte Madera, CA – Our Local Coverage Area
We serve Corte Madera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Walk-In Showers & Shower Remodeling in Corte Madera
Most projects run two to four weeks from demo to final inspection. A like-for-like shower replacement can finish in seven to ten business days; a custom curbless design with glass templating runs closer to four weeks, mostly because the glass fabricator needs five to seven business days after tile. Call (866) 320-2646 and we’ll give you a specific schedule for your house.
Yes – any project that moves plumbing, alters the waterproofing assembly, or changes the framing requires a permit and inspection in Corte Madera. A pure cosmetic retile over an existing intact pan sometimes doesn’t, but we pull the permit and confirm with the local building department before work starts. We don’t ask you to handle the paperwork.
Absolutely, and it’s the most common way to keep the budget lean. A like-for-like replacement keeps the drain and valve where they are, which saves $1,200 – $3,000 and often a week of schedule. We’ll tell you upfront whether your existing layout can take a curbless conversion or whether the subfloor needs recessing.
The shower component runs $4,500 – $12,000, and the full bathroom scope lands at $9,000 – $28,000. The biggest swing factors are drain relocation, tile material (porcelain vs. natural stone), glass style, and whether we find hidden framing or plumbing issues behind the wall. Call (866) 320-2646 for an exact quote – estimates are free and we itemize every line.
Every shower we install is backed by our 730-Day Done Right Promise: if the waterproofing, tile, or glass installation isn’t right, we make it right. That’s the workmanship guarantee, and it’s in writing before we start. Fixture manufacturer warranties (Kohler, Moen) run separately and we’ll explain both at the walkthrough.
Get a Free Walk-In Shower Estimate in Corte Madera
If you’re planning Walk-In Showers & Shower Remodeling in Corte Madera, the fastest way to a real number is a free on-site estimate. We’ll measure the shower, check the drain and valve, look at the framing, and hand you a written line-item quote – usually within a few days. Our technicians bring up to 12 years of experience to the job, and we serve the Corte Madera area routinely. Call (866) 320-2646; a live person answers, and we’ll get you scheduled.
Written by the team at Groundwork Construction Co.