Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Window Installation in Corte Madera, CA: What the Job Actually Takes
Window installation in Corte Madera runs $4,500 to $15,000 for a typical whole-house project, and $8,000 to $25,000 when you’re specifying impact-rated units for the creekside and hillside homes here. A standard single-window swap takes half a day; a full-house job with new frames, flashing and trim runs three to six days. Call (866) 320-2646 and we’ll schedule a free on-site estimate.
The Process, Stage by Stage
Window installation isn’t a one-day drop-in. It’s a sequence, and the decisions you make at each stage affect the one after it. Here’s how it runs when we’ve got the job in hand.
Stage 1: Measure and scope (1 – 2 hours)
We measure every opening, check the rough framing, and look at what’s behind the existing trim. This is where you decide replacement vs. new construction units. If your walls are opening up (say, during a larger rehab), you want new-construction windows. If you’re keeping existing walls, you’re looking at replacement units or pocket installs.
Stage 2: Product selection (your call, 1 – 2 weeks)
You choose the frame material, glazing package, and finish. We’ll bring samples from Andersen, Marvin, or our vinyl line so you can see how they look against your siding. Choose now, not later – late product changes are what blow up timelines.
Stage 3: Permits and fabrication (3 – 6 weeks)
Most full-window projects here need a building permit, and fabricated units take four to six weeks to arrive. We handle the permit paperwork and the inspection scheduling. You don’t touch it.
Stage 4: Removal and install (3 – 6 days)
Day 1 is demo and prep: out comes the old unit, in goes the flashing and sealant at the rough opening. Days 2 – 4 are setting the new frames, squaring, and fastening. Trim, insulation, and finish work follow. Every opening gets flashed to deflect Corte Madera’s winter rain.
Stage 5: Inspection and walkthrough (1 – 2 days)
The city inspects. We walk you through every window, show you the operation, and confirm seals and finishes. Then it’s covered under the 730-Day Done Right Promise.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Choosing Your Windows: What Matters for Corte Madera
- Frame material. Vinyl is the budget pick ($4,500 – $9,000 for a mid-size job). Wood and wood-clad aluminum cost more but suit the custom homes here. Fiberglass sits in the middle and holds up to moisture well.
- Glazing. Double-pane low-E is the default. Triple-pane costs 15 – 25% more and is worth it on the windy hillside lots. Impact-rated glass ($8,000 – $25,000 for a full install) is the spec you’ll see on homes near the creek that carry flood-elevation concerns.
- Trim and finish. Aluminum-clad exterior trim outlasts painted wood in this marine climate. Painted wood looks better – for a few years.
- Operation. Casement and awning windows seal tighter than double-hungs in wind-driven rain. Sliders are easier to operate on large openings.
This is part of a full Windows & Doors in Corte Madera scope, and our Windows & Doors service covers everything from single swaps to full re-glazing.
What Window Installation Costs in Corte Madera, CA
Here’s the real number: $4,500 – $15,000 for a typical whole-house installation. Impact-rated projects push to $8,000 – $25,000. Five things move you up or down that scale:
- Number and size of openings. A 12-window house costs more than a 5-window fix. Large picture windows cost more per unit than standard double-hungs.
- Frame condition. Rotted or out-of-square framing adds carpentry hours.
- Access and height. Hillside homes with second-story windows need scaffolding and more labor.
- Product grade. Vinyl vs. wood-clad vs. fiberglass. Brand tier matters.
- Permit scope. A single replacement may not need a permit; a full-house project does, and that adds cost.
Your written estimate itemizes windows, labor, permits, trim, and disposal. Excluded: structural repairs, stucco patch, and painting. Those get quoted separately.
See the difference
Before
After
Before
After
Before
AfterWhat Corte Madera Homes Do to This Job
Corte Madera’s split between flood-zone flats and hillside lots changes window installation from a straightforward swap into a careful job. In the low-lying areas near Corte Madera Creek and the Town Center, homes carry flood-elevation requirements, and window openings above grade may face stricter sill-height specs. On the hillside lots above town, the mid-century ranchers and split-levels from the 1950s and 70s often have settled or out-of-square framing, which means more carpentry before any window goes in. The wet marine winters push us toward flashing detail that goes beyond standard practice. We see this most often on the older stock near the creek and on the homes along the hillside streets. Corte Madera permitting is real – plan for inspections. We serve the whole town, and you can see the full scope on our Corte Madera service-area page.
Serving Corte Madera, CA – Our Local Coverage Area
We serve Corte Madera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Window Installation in Corte Madera
A full-house job runs three to six days on-site, plus four to six weeks for fabrication and permitting. Order your windows early – delays in fabrication are the most common reason timelines slip. Call (866) 320-2646 to start the estimate.
Full-house installs and any change to opening size require a building permit. Like-for-like single replacements often don’t. We pull the permits and pass the inspections. Call (866) 320-2646 for a free permit check on your project.
Yes, replacement units go into existing openings without structural work. If the framing is rotted or out of square, we’ll flag it before install and quote the carpentry separately.
Most projects fall between $4,500 and $15,000; impact-rated installs run $8,000 to $25,000. Your written estimate shows each line. Call (866) 320-2646 – estimates are free.
Every install is covered by our 730-Day Done Right Promise. Manufacturer warranties on the units themselves run longer. We hand you both in writing.
Ready for Windows That Fit
Call (866) 320-2646 for a free on-site estimate on window installation in Corte Madera. We’ll measure every opening, talk through materials and timing, and hand you a written line-item quote – no surprises. Homeowners here often pair the project with a matching Wood Fence in Corte Madera or Chain Link Fence in Corte Madera when they’re updating the yard. Calls are answered by a live person, 24/7.
Written by the team at Groundwork Construction Co.