Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vinyl Fence in Corte Madera, CA: What It Costs and How Long It Takes
A vinyl fence in Corte Madera, CA typically runs $3,500 to $9,000 for a standard residential run, and most jobs are built over two to three working days once materials are on site. That range covers 100 to 200 linear feet of premium vinyl with posts set in concrete, and it moves up from there on hillside lots or where a permit, survey, or fence-to-grade accommodation is involved. Call (866) 320-2646 to schedule a free on-site estimate and lock in a written, line-item number before any work begins.
We build vinyl fences throughout Corte Madera for homeowners who want a clean, low-maintenance boundary that holds up to Marin’s wet winters without the annual sealing and staining a wood fence demands.
How We Build a Vinyl Fence in Corte Madera, Start to Finish
Vinyl rail-and-picket fences look simple from the street. They aren’t. Everything below the ground decides whether the fence stays plumb after five seasons of rain and root movement. Here’s the sequence a real job follows.
- Day 1 morning – call-before-you-dig and layout. We mark the utility locator request, then set the actual fence line with stakes and string. On a hillside lot, that means deciding whether we step the fence panels with the grade or run a top-rail slope. You’ll want to be there for the layout walk if you can, because this is the last easy point to shift a gate or a corner.
- Day 1 – post-hole excavation. Post holes are dug to depth, checked for footing on solid ground, and set in concrete. On Corte Madera’s creekside flats, holes can hit high water tables or spongy fill; if we run into that, the posts set deeper and the concrete cures a day longer. We pull a string line and check plumb before we walk away.
- Day 2 – posts, rails, and pickets. Once the concrete has set, we mount the rails, drop pickets into the routed channels, and cap the top. Panels get checked for level and square. Bays that sit just off a shared property line get extra attention so the fence sits correctly on the surveyed line.
- Day 2 or 3 – gates and hardware. Gate posts get a heavier gauge and a deeper concrete collar than standard posts, because a gate that sags is the number one complaint on any fence. Gate hardware and latches get installed and adjusted so the swing is clean.
- Day 3 – final walk and cleanup. We haul away spoil, sweep the driveway, and do a walkthrough with you. If anything is off – a post slightly out of plumb, a gate that rubs, a cap that isn’t seated – it gets corrected before we leave. The workmanship is backed by our 730-Day Done Right Promise.
Total build time is usually two days of on-site labor, plus a concrete cure window, plus material lead time (typically 1 to 2 weeks for premium vinyl in non-standard colors). We’ll spell out the full calendar in your estimate so you’re not guessing when the crew arrives.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Vinyl Fence Options You’ll Choose Between
Vinyl isn’t one product. The choices below are the ones that move both the look and the price of your fence.
- Picket height and spacing. Standard privacy height is 6 ft; 4 ft is common for front-yard runs and dog containment. Tighter picket spacing costs more per foot but reads as a more solid screen. Wider spacing is cheaper and lets wind through.
- Privacy vs. semi-privacy vs. picket. A solid privacy panel (tongue-and-groove pickets with no gap) is the most expensive and the most private. Semi-privacy with a gap gives you some visibility and a lighter look. Standard picket is the cheapest option and typical for a front boundary.
- Color and finish. White is the budget choice and the most commonly stocked color. Tan and gray are popular in Corte Madera where the fence needs to blend with mid-century wood and stucco. Non-white colors typically add a material premium and a longer lead time.
- Post gauge and reinforcement. Standard posts work on flat ground. Gates, corners, and posts holding a long unsupported run need a heavier gauge or a steel-reinforced insert, which adds cost but prevents the sag that plagues cheap vinyl. We spec the heavier posts on every gate; skipping them is the fastest way to a second job two years from now.
- Wind and grade hardware. Hillside lots above town and open lots near the marsh get more wind load. Grade-following top rails and wind-rated hardware let the fence flex slightly instead of failing at the post.
We don’t push a single brand. The vinyl lines we install are matched to the job – a proven premium line where the fence is visible from the street, a durable mid-grade line for back-corner runs.
What a Vinyl Fence Costs in Corte Madera, CA
For a typical residential vinyl fence in Corte Madera, expect to spend between $3,500 and $9,000. That’s the number to budget, though the final figure depends on the variables below. Here’s what moves a job to the low end and what pushes it to the high end.
- Total linear feet. A 100-foot backyard run sits near the low end. A 200-foot property-line fence with a corner lot pushes toward the top.
- Gate count and gate posts. Each walk gate adds a heavier post and hardware. A double-drive gate adds significantly more. Gate posts are the single most expensive per-foot component.
- Terrain and grade. Flat lots are straightforward. A Corte Madera hillside lot with a 3-foot grade change over the run adds posts, extra panels, and labor to step the fence.
- Demo and haul-away. Removing an existing fence – especially a rotted wood or rusted chain-link – adds cost. We include demo in your written estimate so there are no surprises.
- Permits and surveys. Some fence runs require a permit or a property-line survey. Where that applies, we pull the permit and pass the inspection; the fee and survey cost show up in the line items.
Your written estimate itemizes posts, panels, gates, concrete, demo, and permit fees separately. The number you see is the number you pay. We offer 0% financing for 18 months and $1,000 off projects over $10,000, which puts a full property-line vinyl fence within reach.
See the difference
Before
After
Before
After
Before
AfterWhat Corte Madera Homes Do to a Vinyl Fence
Corte Madera sits in a split that shapes every fence we build here. The low-lying flats near Corte Madera Creek and the Town Center are in a FEMA flood zone, so fence work there runs up against elevation and drainage realities – posts set in soil that saturates in a wet winter, and the occasional need for a drainage plan or a permit review before we dig. Hillside lots above town are the opposite problem: slope stability, retaining walls, and a grade that changes by the foot, which is where the panel-stepping decisions get made. We work in both ZIPs, 94925 and 94976, and the housing stock tells you a lot – mid-century ranchers and split-levels from the 1950s to 1970s, many now being torn down and rebuilt as larger two-story custom homes. On a lot mid-rebuild, the fence often needs to coordinate with a new survey line. Older flats near the creek often carry an old chain-link or leaning wood fence that’s been there since the 70s, and that fence comes out with demo included. If a boundary run is part of a full Fence Installation in Corte Madera project, we’ll coordinate the fence work with the rest of the site plan.
Serving Corte Madera, CA – Our Local Coverage Area
We serve Corte Madera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Vinyl Fence in Corte Madera
A typical residential vinyl fence in Corte Madera is built in two to three working days once materials are on site, not counting the one-to-two-week material lead time. Demolition and site prep happen on day one, panels and posts on day two, and gates and cleanup on the final day. Call (866) 320-2646 for a schedule built around your job.
Whether you need a permit depends on height, location, and whether the fence sits on a surveyed property line; some runs near the flood-zone flats and hillside lots trigger additional review. We handle the permit application and the inspection where one applies, and we tell you upfront in the written estimate whether your job needs one. Call (866) 320-2646 to talk through your specific lot.
A vinyl fence install only requires post holes, so it doesn’t touch your plumbing, electrical, or foundation. The main disruption is the post-hole excavation and any fence demo, which we contain to the fence line and clean up daily. If a utility line runs through the post path, we coordinate the locate-and-avoid before we dig. Call (866) 320-2646 to schedule a walkthrough.
Most vinyl fence jobs in Corte Madera land between $3,500 and $9,000 for a standard residential run. The final number depends on linear feet, gate count, terrain, whether we’re removing an old fence, and any permit or survey fee. Your written estimate itemizes every line so nothing shows up later. Call (866) 320-2646 for an exact quote – estimates are free.
Our vinyl fence work is covered by the 730-Day Done Right Promise – if it’s not done right, we make it right, and that’s one of the longest workmanship guarantees in the residential construction space. The vinyl material itself carries the manufacturer’s warranty, which the estimate spells out by product line. Call (866) 320-2646 to review the warranty terms before you commit.
Get a Free Vinyl Fence Estimate in Corte Madera
Call (866) 320-2646 and a live person answers, 24/7, no voicemail. We’ll talk through your lot, your fence line, and the look you want, then schedule a free on-site estimate in Corte Madera. You’ll get a written, itemized quote with upfront pricing and no surprises, backed by our 730-Day Done Right Promise. Homeowners often pair a new boundary line with Asphalt Driveways & Resurfacing in Corte Madera, and a fence is a natural add-on to Driveway Repair & Replacement in Corte Madera when the front approach is getting reworked. Explore our full Fence Installation service if you’re planning the wider project scope.
Written by the team at Groundwork Construction Co.