Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Aluminum Fence in Corte Madera, CA: What It Costs and How Long It Takes
Aluminum fence installation in Corte Madera, CA typically runs $4,000 – $10,000 for a standard residential run, and most jobs take 2 – 4 days on site once materials land. Aluminum is the pick here because the marine air and wet winters punish wood and rust out cheaper steel, while powder-coated aluminum shrugs both off. Call (866) 320-2646 for a free on-site estimate. If your project is part of a full Fence Installation in Corte Madera, we scope the whole thing in one visit.
How aluminum fence installation actually runs, stage by stage
Four days, five stages, and a handful of decisions you’ll make along the way. Here’s the sequence so nothing catches you off guard.
Stage 1: Site walk and layout (day 1, about 2 hours)
We mark the fence line with string and stakes, check the property line against your plat, and flag anything underground. In Corte Madera’s creekside flats this matters more than in most towns: irrigation runs, old drainage tile, and shallow utilities show up often. You decide the exact run and gate placement here, and we confirm setback from any flood-elevation marker.
Stage 2: Permit and HOA clearance (3 – 10 business days, before we dig)
A fence under 6 feet on a single-family lot is usually permit-exempt in Corte Madera, but height, corner-lot sight lines, and flood-zone lots can change that. We pull what’s needed and, if you’re in an HOA, we submit the style and finish for approval. You sign off on the final color and picket style at this stage so there’s no repaint later.
Stage 3: Digging and setting posts (day 2, most of the day)
Posts go in holes set well below frost line and, on the low flats near Corte Madera Creek, we set them deeper and use a gravel base so seasonal groundwater doesn’t heave them. Posts are set in concrete and left to cure. You don’t have to be home for this – most homeowners check in at the end of the day.
Stage 4: Panels, rails, and gates (day 3)
Panels rack to follow grade, which is why aluminum suits Corte Madera’s sloped hillside lots so well – a rackable panel steps down a grade without the stair-step look wood gives you. Gates get hung, hinges aligned, and the latch tested. That’s the day the fence starts to look like a fence.
Stage 5: Walkthrough and touch-up (day 4, about an hour)
We torque every fastener, touch up any scratches with matching powder-coat paint, and walk the line with you. You get the written workmanship coverage on the spot. Most jobs close out the same week they start.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The aluminum fence options you’ll choose between
Aluminum isn’t one product – the choices below are the ones that actually change how the fence looks, holds up, and costs.
- Picket style and spacing: A 4-foot residential picket with 4-inch spacing reads open and light; a 5-to-6-foot privacy-style picket costs more per foot but blocks sight lines. For a Corte Madera backyard, the 4-foot style is the usual pick.
- Powder-coat finish: Standard colors (black, bronze, white) are baked-on and last decades. Custom colors add a lead time and a little cost. Black is the safe call; bronze blends into the trees better on hillside lots.
- Rackable vs. stepped panels: Rackable panels follow a slope smoothly and are near-essential on Corte Madera’s hillside grade. Stepped panels work on flatter flats.
- Grade of aluminum: Residential-grade extrusions are fine for most lots; heavier commercial-grade is worth it where the fence takes wind load or sits along a busy street.
- Gates and hardware: A self-closing hinge and a keyed latch add a small amount and make the gate last longer. Match the gate frame to the panel weight so it doesn’t sag.
Where finishes or hardware tie into a home’s exterior palette, coordinating with the siding tones matters – we keep James Hardie and KraftMaid color families in mind when a fence has to sit next to a recently finished exterior.
What Aluminum Fence costs in Corte Madera, CA
Most residential aluminum fence jobs here land between $4,000 and $10,000. That spread isn’t noise – it’s a handful of variables you can see on paper before anyone digs.
| Line item | Typical range |
|---|---|
| Aluminum fence installation (full run) | $4,000 – $10,000 |
| Gate and hardware add-on | Included to +$400 – $900 |
| Custom color powder-coat | +$150 – $500 |
| Extra post depth for flood-zone flats | +$200 – $600 |
What pushes a job to the high end: linear footage (a 60-foot run sits near the bottom, a 150-foot run near the top), slope and grade that demand rackable panels and deeper posts, gate count, and finish. What keeps it low: a short straight run on flat ground with stock black panels and one gate. Our written estimate lists every line – panels, posts, concrete, gates, hardware, and permit – so the number you see is the number you pay. We don’t do surprise change orders.
See the difference
Before
After
Before
After
Before
AfterWhat Corte Madera homes specifically do to this job
Corte Madera splits in two, and aluminum fence work feels that split. Down on the flats near Corte Madera Creek and the Town Center, lots sit in a FEMA flood zone, so posts have to go deeper below grade to resist seasonal groundwater, and on some properties the fence line has to respect drainage and grading plans that a hillside town like Mill Valley never deals with. Up the hillside, lots are steep, panels have to rack to follow grade, and the mid-century ranchers and split-levels from the 1950s through the ’70s often mean we’re working around older retaining walls and settled soil. We regularly see posts heave and wood fences rot out on the wet creekside lots – aluminum with a proper gravel base holds up where wood won’t. Permits and HOA sign-offs vary block to block, so we check before we dig. This same read on Corte Madera ground conditions guides our Fence Installation work across Corte Madera, and it’s why homeowners often pair this with Driveway Repair & Replacement in Corte Madera when the fence line runs along a worn drive. We’ll confirm your exact requirements on the estimate.
Serving Corte Madera, CA – Our Local Coverage Area
We serve Corte Madera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: Aluminum Fence in Corte Madera
Most aluminum fence jobs take 2 – 4 days on site, with a 3 – 10 business day permit window before we dig if one is required. That’s faster than wood or vinyl because aluminum panels arrive fabricated and rack to grade – no on-site cutting. Call (866) 320-2646 for a free estimate and a firm date.
Usually not for a standard residential run under 6 feet, but corner lots, flood-zone properties, and HOA communities can require one. We check your lot’s specifics and pull anything needed as part of the job. Call (866) 320-2646 and we’ll tell you what your property needs.
Yes – powder-coated aluminum resists rust and rot where wood and steel don’t, which is why it’s a fit for Corte Madera’s damp, marine-influenced climate. On the flats we set posts deeper in a gravel base to handle seasonal groundwater. Call (866) 320-2646 to talk through your lot.
Most jobs run $4,000 – $10,000 depending on linear footage, slope, gate count, and finish. Flood-zone post depth and custom colors add a bit. Call (866) 320-2646 for an exact written quote – estimates are free.
Our work is covered by the 730-Day Done Right Promise: if it’s not right, we make it right, for two full years. The powder-coat finish carries its own manufacturer coverage. Call (866) 320-2646 with any warranty question.
Get a free aluminum fence estimate in Corte Madera
Call (866) 320-2646 to schedule your free on-site estimate for Aluminum Fence in Corte Madera. A live person answers, day or night, and we walk your lot, confirm flood-zone or hillside needs, and hand you a written line-item quote – no guessing, no surprises. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off. Let’s get the line right.
Written by the team at Groundwork Construction Co.