Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Cabinets & Countertops in Pacifica, CA: What It Costs and How Long It Takes
New cabinets and countertops in Pacifica run $14,000 – $45,000 for a typical full replacement, with cabinet installation alone at $4,000 – $13,000 and countertops at $2,000 – $6,500. Most jobs take three to five weeks from demolition to final walkthrough, though coastal homes on bluff-edge lots can stretch longer once moisture damage behind the old boxes is uncovered. Call (866) 320-2646 to schedule a free on-site estimate.
How the job actually runs, stage by stage
Every Pacifica job follows the same order of operations. The stages don’t move around, because cabinets have to land on a flat, dry, square wall before a countertop fabricator can template anything. Here’s what happens and when, and what you’ll be deciding at each point.
Stage 1: Site check and field measure, day 1 (about 2 hours). We measure the existing footprint, check that the walls are plumb and the floor is level, and look hard at the wall behind the cabinets for the fog-belt moisture problems that are common on Pacifica’s west-facing walls. You confirm door style, finish, and the layout of the boxes. Any change to the layout gets flagged here, before anything is ordered, because moving a sink or range after the boxes are built is where budgets blow up.
Stage 2: Demolition and wall prep, days 2 – 3. Old cabinets and counters come out, and we open up the wall to check for soft framing, old galvanized supply lines, and any wiring that isn’t to current code. On mid-century Pacifica homes, this is the stage where deferred repairs surface. You approve any repair before we move on. Drywall patches and paint prep finish the stage.
Stage 3: Cabinet set, days 4 – 6. Base and wall cabinets get leveled, shimmed, and screwed into studs, not just drywall. We set the boxes, hang doors and drawers, and install toe kicks and fillers. Appliances get test-fitted. You walk the room and confirm the layout before we call the countertop fabricator.
Stage 4: Template and countertop install, days 7 – 14. The fabricator templates the installed cabinets, cuts the slab, and returns to set it. Quartz and granite come from a brand like Cambria; laminate and butcher block are faster. Sink and faucet cutouts happen in the shop, not on your kitchen floor. The gap between template and install is the longest single wait in the job.
Stage 5: Hookups and final walkthrough, days 15 – 21. Plumbing and electrical hookups, backsplash if it’s part of the scope, and a full walk of every door, drawer, and seam. You get a written punch list and the 730-Day Done Right Promise covering the workmanship.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The real choices you’ll make between
Most of the budget lives in three decisions: box construction, door and finish material, and countertop grade. Here’s what each option actually costs you in money and upkeep.
- Stock vs. semi-custom cabinets. Stock boxes are cheaper and faster to land, but they come in fixed sizes, which means filler strips. Semi-custom (KraftMaid is a solid mid-tier pick) lets you fit odd Pacifica kitchen footprints without awkward gaps.
- Plywood vs. particleboard boxes. Plywood holds up to the damp Pacifica air far better. Particleboard swells when it gets wet and stays swollen.
- Quartz vs. granite vs. laminate. Quartz is the standard for most of our Pacifica clients: non-porous, no sealing, holds up to coastal humidity. Granite needs periodic sealing. Laminate is the budget play but seams show and edges chip.
- Door style and finish. Painted shaker is the current default. Flat-slab and full-overlay doors read more modern. Painted finishes on coastal homes need a factory finish, not site-painted, to survive salt air.
- Hardware and hinges. Soft-close hinges and full-extension drawer slides are the upgrade that lasts longest. Skip them and you’ll be replacing hinges in five years.
What cabinets and countertops cost in Pacifica, CA
The full-replacement range is $14,000 – $45,000. Here’s the line-item breakdown you’ll see in a written estimate.
| Scope | Typical range |
|---|---|
| Cabinet installation | $4,000 – $13,000 |
| Countertop installation | $2,000 – $6,500 |
| Backsplash (if included) | $800 – $2,500 |
| Full cabinets & countertops replacement | $14,000 – $45,000 |
Five things push a Pacifica job to the low or high end. Kitchen size is the biggest driver: a Linda Mar galley kitchen and a hillside split-level with an open plan sit at opposite ends. Existing condition matters more here than inland, because fog-belt moisture means soft framing and rotted subfloor are common behind old cabinets. Relocating plumbing or electrical (moving the sink, adding a range hood circuit, shifting the dishwasher) adds real dollars. Material grade moves the number by thousands: laminate-to-quartz is a bigger jump than semi-custom-to-stock. And permit scope matters; a straight swap is usually exempt, but relocating plumbing or knocking out a wall triggers a permit and inspection.
Your written estimate lists every line item, fixed pricing with no change orders, and the exact material specs by brand and SKU. What’s not included by default: appliance delivery and install, structural changes if a wall turns out to be load-bearing, and unseen rot found during demo. You approve any addition in writing before it happens.
See the difference
Before
After
Before
After
Before
AfterWhat Pacifica homes do to a cabinets and countertops job
Pacifica’s mid-century stucco-and-wood ranch homes and split-levels, plus the older beach cottages around Rockaway and Linda Mar, were built in an era when cabinet boxes were often site-built and wall framing was sometimes undersized by today’s standards. On the west-facing walls, in the fog belt, the wood behind the cabinets and the fasteners holding them can be wet and corroded by the time we open the wall. We see soft sill plates, rusted T1-11 siding pushing moisture inward, and old galvanized supply lines that are already one winter storm from a leak.
The bluff-edge and hillside lots add a layer inland Peninsula kitchens don’t face. Pacifica’s coastal development permit process and the geotechnical review that comes with bluff-edge projects mean that even a kitchen refresh can trigger scrutiny if the work touches exterior walls or foundation. We plan the schedule around the rainy season and wind exposure, and we build corrosion-resistant materials and proper water detailing into the spec from day one. If you’re covering the wider project as well, our team handles the scope as part of a full Kitchen Remodeling in Pacifica, and homeowners in Pacifica often pair cabinet work with Walk-In Showers & Shower Remodeling in Pacifica or a Tub-to-Shower Conversion in Pacifica when they’re already mid-remodel. For the broader picture, our Kitchen Remodeling service covers the full build, and you can see everything we do across Pacifica.
Serving Pacifica, CA – Our Local Coverage Area
We serve Pacifica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked: cabinets & countertops in Pacifica
Most jobs run three to five weeks from demo to final walkthrough, with the longest single wait being the gap between countertop template and install. Coastal homes with moisture repairs behind the old boxes can extend that by a week or more, and we flag the additional time in writing before we start.
A straight cabinet and countertop swap usually doesn’t require a permit; relocating plumbing, moving a gas range, or removing a wall does. We pull the permits and pass the inspections, and we tell you at the estimate stage whether your scope is likely to cross that line.
Yes. Keeping the existing sink, range, and dishwasher in place is the most common scenario, and it’s the fastest and least expensive path. We can engineer a layout that works within those constraints, or we can quote the plumbing and electrical move if the current layout is what’s been frustrating you.
Plan on $14,000 – $45,000 for a full replacement, with cabinet installation at $4,000 – $13,000 and countertops at $2,000 – $6,500. The high end reflects larger kitchens, semi-custom boxes, quartz, and any repair work uncovered during demo. Call (866) 320-2646 for an exact quote; estimates are free.
Every Pacifica cabinets and countertops job is covered by our 730-Day Done Right Promise, one of the longest workmanship guarantees in residential construction. If something isn’t right, we come back and fix it, and that’s written into your contract, not just promised.
Get a free estimate for cabinets and countertops in Pacifica
Call (866) 320-2646 for a free on-site estimate on cabinets and countertops in Pacifica. A live person answers the phone around the clock, and on the call we’ll set a visit, measure your kitchen, and walk you through the material options and the written line-item pricing. You get a fixed number, the 730-Day Done Right Promise, and 0% financing for 18 months with $1,000 off projects over $10,000.
Written by the team at Groundwork Construction Co.