Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Walk-In Showers & Shower Remodeling in Pacifica: What It Takes and What It Costs
Walk-In Showers & Shower Remodeling in Pacifica runs $9,000 – $28,000 for a full bathroom, and a standalone walk-in shower installation lands in the $4,500 – $12,000 range. Most jobs take two to four weeks from demo to final inspection, with the tile and glass phases eating the bulk of that time. Pacifica’s coastal humidity and salt air make waterproofing, ventilation and corrosion-resistant hardware the deciding factors, not decoration. Call (866) 320-2646 for a free on-site estimate and a written, line-item number.
How the job actually runs, stage by stage
We don’t hand you a vague schedule and disappear. Here’s the real sequence on a Pacifica shower remodel, and what you’ll be deciding at each stop.
- Stage 1 – Site visit and written estimate (week 0). We measure the existing shower, check the wall substrate and the drain, and confirm whether the valve, venting and framing can stay put. You decide the footprint and whether you’re keeping the toilet and vanity layout. This is also when we flag permit scope, since anything touching plumbing, electrical or structure needs a permit pulled and inspected. Written estimate comes back itemized, not as one lump sum.
- Stage 2 – Permits and material selections (week 1). We pull the permits and schedule the rough inspection. You make the tile, pan, glass and fixture choices now, not mid-build, so nothing sits waiting on a backorder. Material lead times are the single most common cause of a stalled shower project, so we lock them early.
- Stage 3 – Demo and rough-in (days 1 – 3). Out comes the old shower, the curb and any failed substrate. On Pacifica homes we often find rot behind the wall from long-term moisture, and that gets corrected before anything goes back in. The plumber relocates the drain and valve if the new pan requires it, and electrical for the fan and lighting gets roughed in. Rough inspection happens here.
- Stage 4 – Waterproofing and tile (days 4 – 10). This is where the job is won or lost. We build a fully waterproofed pan and wall system, then set tile with proper cure time between coats and grout. No shortcuts on cure time, because a rushed waterproofing layer is the reason showers fail five years later. You approve tile layout before setting.
- Stage 5 – Glass, fixtures and final inspection (days 10 – 14). Glass gets templated and installed, fixtures go in, the fan gets tested, and the final inspection closes out the permit. We walk the shower with you, run it, and check for any seam or drain issue before we call it done.
That’s a realistic two-to-four week window for most jobs. Larger footprint changes, structural work or a full bathroom remodel wrapped around the shower pushes longer.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices you’ll actually make, and what each one costs you
A walk-in shower is a stack of decisions, and each one has an honest trade-off. Here’s what we walk through with homeowners.
- Shower pan: pre-formed vs. custom-tiled. A pre-formed acrylic or composite pan is faster, cheaper and easier to keep sealed, which suits a household that wants low maintenance. A custom-tiled pan matched to the floor tile looks seamless and lets you fit an odd footprint, but it depends entirely on correct waterproofing and costs more in labor.
- Wall tile: porcelain vs. natural stone. Porcelain holds up to Pacifica’s damp air without sealing and stays in budget. Natural stone (marble, travertine) looks richer but needs periodic sealing and can stain, and the salt-heavy air means we specify a sealer rated for coastal conditions.
- Glass: framed vs. frameless. Frameless glass opens the room visually and is the look most homeowners want, at a higher price. Framed glass costs less and hides hardware, but the frame collects moisture in a humid bathroom. We spec corrosion-resistant hardware on every Pacifica job because standard steel fittings pit fast here.
- Fixtures and valves. A quality thermostatic valve with a brushed or PVD finish outlasts a chrome bargain fixture by years in salt air. You’ll choose the valve, trim and showerhead; we recommend brands with real parts availability rather than a finish that looks good and fails in four years.
- Ventilation. A properly sized exhaust fan is non-negotiable in a Pacifica bathroom. Without it, the fog-belt humidity never leaves and the shower fails from the inside out. We size the fan to the room and vent it outside, not into the attic.
What Walk-In Showers & Shower Remodeling costs in Pacifica, CA
Plan on $9,000 – $28,000 for a full bathroom remodel here, or $4,500 – $12,000 for the walk-in shower alone. Here’s how those numbers break down:
| Line item | Typical range |
|---|---|
| Walk-in shower installation | $4,500 – $12,000 |
| Shower replacement (like-for-like) | $3,000 – $8,500 |
| Full bathroom remodel including shower | $9,000 – $28,000 |
| Vanity installation (if included) | $800 – $3,000 |
What pushes a job toward the high end: relocating the drain or valve (adds plumbing and rough-in labor), correcting rot or failed substrate behind the wall, upgrading to frameless glass and natural stone, and any structural change to widen the footprint. What keeps it low: a like-for-like replacement in the same spot with porcelain tile, a pre-formed pan and framed glass.
Our written estimates are itemized and the price doesn’t move once work starts unless you approve a change in writing. No closed-door change orders. Every walk-in shower we build is covered by our 730-Day Done Right Promise, and projects over $10,000 qualify for our standing $1,000 off, with 0% financing for 18 months available. This work sits inside our broader Bathroom Remodeling in Pacifica service if you’re planning the whole room.
See the difference
Before
After
Before
After
Before
AfterWhat Pacifica homes specifically do to this job
Pacifica’s housing stock and its coastal setting change the shower job in ways an inland Peninsula contractor won’t anticipate. Many of the homes we work on here are 1950s – 70s stucco-and-wood ranches and split-levels, plus older beach cottages in Rockaway and Linda Mar, and on bluff-edge and hillside lots the fog belt and salt-laden onshore winds drive constant moisture intrusion and fastener corrosion. On a shower remodel that shows up as rusted valve trim, failed caulk seams and, all too often, rotted framing behind the wall that a quick patch would hide.
If your project touches structure or expands the footprint, coastal development permit and geotechnical realities can come into play on these bluff and hillside lots, and we scope for that early rather than discovering it mid-build. Permits get pulled and inspected on anything touching plumbing, electrical or structure. (ZIP 94044.) The work we cover spans Pacifica, and homeowners often pair a bigger interior upgrade with Roof Replacement & Installation in Pacifica or Metal Roofing in Pacifica when the same moisture fight is happening up top. For the full range of what we do across the city, see Pacifica.
Serving Pacifica, CA – Our Local Coverage Area
We serve Pacifica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked about Walk-In Showers & Shower Remodeling in Pacifica
Most walk-in showers take two to four weeks from demo to final inspection, with waterproofing and tile curing setting the pace. Material lead times are the usual wild card, which is why we lock tile, pan and glass selections in week one.
Yes, if the work touches plumbing, electrical or structure, which covers most real shower remodels. We pull the permits and schedule the rough and final inspections, so you’re not chasing the building department. A pure like-for-like cosmetic swap may not need one, and we’ll tell you honestly which side of that line your job falls on.
Often yes, and keeping the drain and valve in place is the biggest lever on cost. A pre-formed pan sized to your existing footprint and a like-for-like valve swap can bring the job in around $4,500 – $8,000. Relocating the drain means new plumbing and rough-in labor.
A standalone walk-in shower runs $4,500 – $12,000, and a full bathroom remodel that includes it runs $9,000 – $28,000. Tile grade, glass type, rot repair and plumbing relocation are what move the number. Call (866) 320-2646 for an exact quote, estimates are free.
Every walk-in shower we build is backed by our 730-Day Done Right Promise, if it’s not done right, we make it right. Finishes and fixtures are covered per manufacturer terms, and we walk you through both in writing before work begins.
Get a free estimate for your Pacifica walk-in shower
When you call (866) 320-2646, a live person answers, day or night, and we set an on-site visit. We measure, check the substrate and drain, and talk through what you want. Then you get an itemized written estimate, upfront pricing with no surprises, and a clear schedule. Our technicians have up to 12 years of experience and arrive background-checked and in uniform. Call today to schedule your free estimate.
Written by the team at Groundwork Construction Co.