A Groundwork company - serving San Francisco, CA
Metal Roofing in Pacifica, CA | Groundwork Construction Co. of San Francisco

Metal Roofing in Pacifica - Free Roof Inspection, Written Price

Free roof inspection with photos, then an itemized written price before anything is ordered. Installed by a licensed local professional and backed by a workmanship warranty.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Metal Roofing in Pacifica, CA: What It Costs and How the Job Runs

Metal roofing in Pacifica typically runs $15,000 to $40,000 installed, and most homes are finished in seven to twelve working days once the roof is stripped and the panels are on site. You’re buying a roof that handles salt fog, wind-driven rain and decades of coastal damp without the rot that eats wood shake and the granule loss that chews through asphalt. Call (866) 320-2646 for a free on-site estimate and a written line-item quote.

Call (866) 320-2646

How a metal roofing job actually moves, stage by stage

Every metal roof we install in Pacifica follows the same order. The stages matter because skipping one is how a metal roof leaks ten years in.

Day 1: tear-off and deck inspection. We strip the old roof down to the sheathing and walk the deck board by board. On 1950s and 60s Pacifica ranch homes this is where surprises live: soft spots around chimneys, rusted-through flashing, and on T1-11-sided split-levels, rot that has crept from the wall into the deck edge. You decide then whether to replace individual boards or re-sheet the whole deck. Re-sheeting runs longer and costs more, but it gives the panels a flat, fastener-ready surface.

Days 2 to 3: underlayment and flashing. We lay a high-temp synthetic underlayment rated for metal, then set the eave trim, valley metal and penetration flashing. On Pacifica’s fog-belt homes we pay extra attention to every penetration and valley, because wind-driven rain off the Pacific finds weak points that a dry inland roof never tests. This is also when we cut in the ridge and hip details.

Days 4 to 8: panel install. Panels go up and get fastened with the correct clip or exposed-fastener system for the profile you chose. Standing seam panels are rolled to length and run eave to ridge with concealed clips. Exposed-fastener panels go down in overlapping sheets. You’ll have chosen panel color and profile back at the estimate; this is where it becomes real.

Day 9: trim, ridge and gutters. Ridge caps, rake trim and any gutter reconnection happen here. If you’re adding guards or a new gutter run, that’s decided before this stage. Most of our Pacifica jobs pair the roof with a fresh gutter line because the salt air and constant fog shorten the life of any metal bracket that wasn’t corrosion-rated.

Day 10 and beyond: final inspection and walkthrough. We test every penetration, check fastener torque, walk the perimeter and clean up. You get a written walkthrough and the 730-Day Done Right Promise behind the work. If your roof ties into a broader project, this is also where we hand off cleanly to the rest of the job, including any Roofing in Pacifica scope you’re coordinating at the same time.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The options you’ll choose between before we order panels

Metal roofing isn’t one product. The choice you make here decides both the price and how the roof ages in Pacifica’s salt air.

  • Standing seam vs. exposed fastener. Standing seam hides fasteners under clips and holds up best in coastal wind and rain, but costs more per square. Exposed-fastener panels (the screw-down type) cost less and install faster, but every screw is a future maintenance point in salt air. On bluff-edge lots we lean standing seam.
  • Steel vs. aluminum. Steel panels, including the GAF and CertainTeed lines, are strong and take a coating well, but any cut edge or scratch needs attention to keep rust out. Aluminum resists salt corrosion better and is the smarter pick within a few miles of the water in Linda Mar and Rockaway, but it dents more easily and costs more.
  • Kynar finish vs. standard paint. Kynar-type finishes hold color and chalk less over fog-belt years; standard painted finishes fade sooner. The upcharge is modest for the extra lifespan.
  • Panel profile and color. A lower rib reads cleaner on a mid-century ranch; a taller rib suits a split-level. Color is cosmetic but the finish matters.
  • Concealed vs. exposed fasteners on penetration details. This is a detail you’ll rarely see but it’s the difference between a quiet roof and a leaky one.

We don’t list every brand on every job. We pick the ones that fit the exposure, the profile and your budget, and we put the choice in writing.

What Metal Roofing costs in Pacifica, CA

Most Pacifica metal roofs land between $15,000 and $40,000 all-in. Where your job sits in that range comes down to five things:

  • Roof size and pitch. A simple gable on a small ranch home is the low end. Complex hips, dormers and steep sections cost more to install and use more panel.
  • Deck condition. A soft or rotted deck adds re-sheeting to the bill. On 1950s-70s Pacifica homes this is common, especially under old chimney flashing.
  • Panel system and metal. Standing seam in aluminum is the high end. Exposed-fastener steel is the low end.
  • Penetrations and detail work. Skylights, chimneys, valleys and multi-plane roofs add labor.
  • Permit scope. A straightforward re-roof permit is a modest line item. Anything that touches structure or triggers coastal review runs higher.

A written estimate from us itemizes the deck work, the panel system, the underlayment, the flashing, the gutters if you’re adding them, and the permit. It excludes anything we haven’t inspected yet, and we tell you that up front rather than surprising you later. Upfront pricing, no surprises is the standard we hold to.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What Pacifica homes specifically do to this job

Pacifica is built across the coastal bluffs and steep marine-terrace hillsides along the San Mateo coast, and that changes how a metal roof gets permitted and installed. Bluff-edge and hillside lots routinely deal with coastal development permit conditions and erosion-control measures before work proceeds, and any roof project that touches structure or a cantilevered section can trigger geotechnical scrutiny that an inland Peninsula job never sees. The fog belt, salt-laden onshore winds and heavy winter storms also drive the material call: aluminum panels and corrosion-rated fasteners on the west-facing slopes, careful wind-uplift detailing on every ridge and eave, and a schedule that works around the rainy season so we’re not opening a roof to weather. The housing stock across Rockaway and Linda Mar is a mix of 1950s-70s stucco-and-wood ranch homes and split-levels, many with T1-11 siding and cantilevered structures on sloped lots, and we commonly find deferred decay under old flashing and dry rot in the deck edge on the seaward side. Those findings are why we inspect the deck before we order panels rather than after.

Serving Pacifica, CA – Our Local Coverage Area

We serve Pacifica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently asked about Metal Roofing in Pacifica

Get a free estimate for Metal Roofing in Pacifica

A free on-site estimate starts with a look at your deck and your current roof, then a written line-item quote you can compare like for like. We answer the phone live, day or night, at (866) 320-2646. We serve Pacifica along with San Bruno, Daly City, Half Moon Bay and San Francisco, and our Roofing service covers the full roof when metal is only part of the plan. Call to schedule.

Written by the team at Groundwork Construction Co.

Why Pacifica Chooses Groundwork Construction Co. of San Francisco

We set the standard for metal roofing in Pacifica.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in Pacifica

Getting your metal roofing project started is simple.

1

Call or Request a Free Estimate

Tell us about your metal roofing project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local metal roofing pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What Pacifica Customers Say

Trusted by homeowners across Pacifica and surrounding areas.

★★★★★

"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."

Marco Castillo
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan

Ready for Metal Roofing in Pacifica?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in Pacifica.

(866) 320-2646

Request a Free Estimate in Pacifica

Tell us about your metal roofing needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch