Windows & doors
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
What sliding & patio door work looks like in Pacifica, CA
Sliding & patio doors in Pacifica, CA typically run $3,800 to $11,500 installed, depending on the unit, opening size, and what the rough opening looks like once the old door comes out. A straightforward like-for-like slider on a sound wall is a one- to two-day job in good weather. A wider multi-panel or a door that sits over a corroded deck ledger on a bluff-edge lot can stretch to four or five days of framing and flashing work before the new unit goes in. Call (866) 320-2646 for a free on-site estimate and we’ll put real numbers in writing. Coastal work here also gets its own permit conditions, so we sort that before we quote.
How we run a sliding & patio door replacement, stage by stage
This is the sequence your project actually follows. Dates move around winter storms off the Pacific, and we won’t set a glass unit until the weather window is stable, because sealing a door right before a rain event is the fastest way to hand you a warranty claim.
Stage 1: Measure and opening assessment (day one, about an hour on site)
We measure the rough opening, check the header, and look at the floor transition. On Pacifica’s 1950s-70s split-levels, the sliding door usually sits on the rear wall closest to a wood deck, and the interesting part is always the same: what the ledger looks like and whether the framing behind the stucco is dry. You get a written line-item estimate from this visit, not a phone guess.
Stage 2: Permit and product order (week one to week three, depending on your unit)
Most replacements here don’t need a structural permit, but anything that widens the opening, changes the header, or adds a cantilevered slider on a hillside lot does. On bluff-edge parcels, that can also pull in coastal permit review and geotechnical conditions, so we confirm the scope before ordering. You’ll pick the unit material, glass package, and finish at this stage; lead times on custom sizes and impact-rated glass run longer, so this is where the calendar is set.
Stage 3: Protection and removal (day one of work, half a day)
We mask the interior, cover the floors, and pull the old door and trim. Anything soft in the sill or framing gets cut back to sound wood. On west-facing walls in Pacifica, that often means we find more rot than the estimate assumed, and we photograph it and get your approval before we add the repair line.
Stage 4: Framing, flashing, and install (one to two days, more if the opening gets reworked)
The doorway gets new sheathing, a sill pan, and proper self-adhered flashing, then the door goes in, shimmed and plumb. We check it for a smooth glide before the trim goes back. Salt-laden onshore wind will find any gap in the flashing, so this is the stage that decides how long the door lasts.
Stage 5: Finish and walkthrough (final half day)
Interior trim goes back, exterior joints get backer rod and a marine-grade sealant, and we test the door in front of you. You get the final walkthrough, the permit sign-off if one was required, and the 730-Day Done Right Promise in writing. If it’s not done right in that window, we make it right.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The options you’ll choose between for sliding & patio doors
A door replacement forces three real decisions. None of them are equally good for every house, so here’s the honest trade-off on each.
- Vinyl sliders: The value pick. $3,800 to $6,500 installed for a standard two-panel unit. Holds up well against salt air, no rot, minimal upkeep. Downside: wider frames and less glass area, and the color palette is limited. Good fit for a rental, a back-of-house slider, or a budget ceiling.
- Aluminum-clad wood: $6,000 to $9,500 installed. Real wood on the inside where you see it, a cladding skin outside that handles Pacifica’s fog and salt. This is what we recommend most often on the mid-century stucco-and-wood ranches, because it matches the interior trim and survives the exterior. Higher cost and a longer lead time are the trade-offs.
- Multi-panel and oversized sliders: $9,000 to $11,500-plus installed. A three- or four-panel unit opens the rear wall of a split-level to a deck or bluffs view, and on homes in Rockaway and Linda Mar, it’s the upgrade people actually feel. It also demands a wider header, so expect framing work and a structural permit.
- Glass package: Standard dual-pane is fine inland-dayside, but a low-e, impact-rated or laminated option is worth the extra $600 to $1,800 on a bluff-edge lot. The trade-off is a lead time of four to eight weeks on custom impact glass.
- Screen and hardware: Roller upgrades, stainless tracks, and a quality screen door add roughly $150 to $500 and are the difference between a smooth door and a sticky one after two foggy summers.
We work with a curated set of brands across every trade, and for a Pacifica slider we often spec the same grade of exterior cladding we’d put on a James Hardie-clad wall, so the detailing and the door agree. If your door replacement is part of a full Windows & Doors in Pacifica scope, we’ll line the materials up on one schedule.
What sliding & patio doors cost in Pacifica, CA
Expect $3,800 to $11,500 installed for a replacement sliding or patio door in Pacifica, with most jobs landing in the $6,000 to $8,500 range. Here’s the line-item breakdown we build the written estimate from.
| Line item | Typical range |
|---|---|
| Standard two-panel slider, installed | $3,800 – $6,500 |
| Aluminum-clad wood slider, installed | $6,000 – $9,500 |
| Multi-panel / oversized slider, installed | $9,000 – $11,500+ |
| Impact or laminated glass upgrade | $600 – $1,800 |
| Sill, framing, or rot repair (per area) | $400 – $2,200 |
| Header/framing for a wider opening | $1,500 – $4,500 |
| Coastal permit or geotech review, when triggered | varies by scope |
What pushes a job to the high end: (1) opening size and panel count, (2) how much rot is behind the old door, (3) whether the header or opening changes, (4) glass spec, and (5) permit scope on a hillside or bluff parcel. What’s included in our written estimate: door and hardware, removal and disposal, framing and flashing, interior trim, exterior sealant, and permit pull if one is needed. What usually isn’t: deck repairs beyond the door, stucco patching on a wall that’s being re-sided anyway, or a new screen door if you didn’t ask for one. Upfront pricing, no surprises. The number you see is the number you pay, and we hold it for 18 months at 0% financing if you’d rather spread it out. Call (866) 320-2646 for an exact quote – estimates are free.
See the difference
Before
After
Before
After
Before
AfterWhat Pacifica homes specifically do to this job
Pacifica is built on coastal bluffs and steep marine-terrace hillsides along the San Mateo coast, and that shapes a sliding door project here in ways inland Peninsula cities never see. A replacement door sitting over a cantilevered or pier-supported structure on a sloped lot can trigger coastal permit review, and if the deck it opens onto has a footing that looks fine in August, winter storm runoff will tell you otherwise. We see real corrosion and rot on west-facing walls here – the fog belt, the salt-laden onshore wind, and heavy winter storms combine to attack every fastener and joint on the exterior. On the mid-century stucco-and-wood ranches and split-levels we work on most, that means the door itself is often the least of it; the sill, ledger, and framing behind the stucco are where the money goes. A deck footing undermined by storm runoff along the coastal bluffs can turn a door swap into a structural conversation. Permits for anything that changes the opening go through the city, and on bluff-edge properties we plan around the rainy season and wind exposure. When the door sits beside a deck that took a beating, homeowners often pair this with Fence Repair in Pacifica or a Paver Driveways in Pacifica project, so one crew handles the exterior in one pass. We cover all of Pacifica and the surrounding San Mateo coast.
Serving Pacifica, CA – Our Local Coverage Area
We serve Pacifica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – sliding & patio doors in Pacifica
A standard like-for-like replacement takes one to two days in good weather, and a wider opening with framing work takes three to five days. The wild card is winter rain and wind off the Pacific, so we schedule the exterior sealing window carefully. Call (866) 320-2646 and we’ll give you a realistic date, not an optimistic one.
A like-for-like replacement usually doesn’t require a structural permit, but anything that widens the opening, changes the header, or sits on a bluff or hillside parcel may need coastal review or geotechnical conditions. We confirm the permit scope before ordering the unit and pull the permits when they’re needed. Call (866) 320-2646 and we’ll walk you through what your property triggers.
Yes, in most cases – a same-size replacement leaves plumbing and structure untouched. If the new door is wider or the existing header has to change, that’s when framing and a structural permit come in. We tell you which category you’re in at the estimate. Call (866) 320-2646 for a free on-site look.
Most Pacifans pay $6,000 to $8,500 for a replacement patio door, with the full range running $3,800 to $11,500 installed. Material, glass spec, opening size, and how much rot hides behind the old door move the number. Call (866) 320-2646 for an exact quote – estimates are free.
Every door we install is covered by our 730-Day Done Right Promise – if it’s not done right within two years, we make it right. That’s on top of the door manufacturer’s own product warranty. Call (866) 320-2646 to schedule your free estimate and design consult.
Get a free sliding & patio doors estimate in Pacifica
Call (866) 320-2646 and a live person answers, around the clock – no voicemail, no waiting until Monday. We’ll set a time for a free on-site estimate and design consult, measure the opening, check what’s behind the stucco, and hand you a written line-item quote with the permit scope spelled out. Background-checked, uniformed technicians on every job. From foundation to finish line, built to last, backed in writing.
Written by the team at Groundwork Construction Co.