A Groundwork company - serving San Francisco, CA
Metal Roofing in San Bruno, CA | Groundwork Construction Co. of San Francisco

Metal Roofing in San Bruno - Free Roof Inspection, Written Price

Free roof inspection with photos, then an itemized written price before anything is ordered. Installed by a licensed local professional and backed by a workmanship warranty.

Call to schedule your free estimate

Work is performed by our local vetted partner.

Free
Written Quotes
Licensed & Insured Written Quotes Free Estimates All Brands Satisfaction Guarantee

Work is performed by our local vetted partner.

RoofingRoofing
Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Metal Roofing in San Bruno, CA

Metal Roofing in San Bruno is a full tear-off and re-roof job, not a weekend upgrade. Most homes need 5 to 9 working days from the first morning of demolition to final inspection, and the cost runs roughly $15,000 to $40,000 for a typical 94066 house. Call (866) 320-2646 to schedule a free on-site estimate and get a written, line-item number before anything gets ordered.

Call (866) 320-2646

How we take a San Bruno roof from old shingles to standing metal

Metal doesn’t go over the top of what’s there. The old roof comes off, the deck gets checked, and the water barrier gets rebuilt before a single panel lands. Here’s the sequence we run, start to finish.

  • Day 1 – Tear-off and deck inspection (1 to 2 days). We strip the existing shingles or tile down to the sheathing and walk the deck board by board. On the older post-war houses here, that’s where soft or delaminated plywood shows up. You approve any decking replacement in writing before we continue, and that’s the one line that can move the bid.
  • Days 2 to 3 – Dry-in and flashing. New underlayment goes down, then the edge metal, valley metal, and the penetrations. Vent stacks, chimney surrounds, and the transition at the low slope get flashed by hand. Get this wrong and the roof will leak within one winter; the marine layer doesn’t forgive sloppy detailing.
  • Days 3 to 6 – Panel set and fasten. Panels get laid to your chosen panel width and fastened on the correct pattern for local wind uplift. Long panels are run in full lengths where the roof geometry allows, which means fewer seams. You choose panel profile and color before this stage, not during it.
  • Days 6 to 8 – Trim, ridge, and close-out. Ridge caps, gable trim, and the final fastener seals go on. We magnet-sweep the yard and driveway twice for stray screws, because a flat tire from a roofing screw is a bad way to remember a good roof.
  • Final day – Inspection and walkthrough. The permit inspection gets called when we say the roof is ready, and we walk the finished roof with you. That’s also when the 730-Day Done Right Promise kicks in: if something’s not right, we make it right, in writing.
Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

The metal roofing options you’ll actually choose between

Most of the decisions on a metal roof come down to four things: panel type, metal, coating, and color. Each one trades cost against how it holds up under salt air and damp.

  • Standing seam vs. exposed fastener panels. Standing seam panels hide the fasteners under raised seams, so there are no screw heads to back out or corrode over time. Exposed-fastener panels cost less but rely on hundreds of gasketed screws that need watching in coastal air. On a San Bruno roof near the fog belt, standing seam is the better long-run choice.
  • Steel vs. aluminum. Steel is strong and accepts a wide range of finishes; aluminum resists salt corrosion better and never rusts. If you’re within a few blocks of the bay or ocean breeze, aluminum or a heavily coated steel is worth the upcharge.
  • Coating and finish. A quality factory finish is what keeps a metal roof looking right through damp winters. The finish, not the bare metal, is the part that ages.
  • Color and profile. Color is aesthetic and durability-neutral; profile affects wind performance and the look from the street. Choose the color before panels are manufactured, because cut lengths aren’t returnable.
  • Panel width and seam spacing. Wider panels mean fewer seams and a cleaner line, but they flex more. Narrower panels handle irregular roof geometry better on some of the cut-up ranch plans around here.

If you’re already planning exterior work, homeowners often pair this with Window Replacement in San Bruno so the whole envelope gets sealed together, and some go further with Impact Windows & Doors in San Bruno for wind resistance.

What Metal Roofing costs in San Bruno, CA

Metal Roof Installation in San Bruno typically runs $15,000 to $40,000, depending mostly on roof size, panel type, and how much of the deck needs replacing. Here’s how that breaks down.

Line item Typical range
Metal roof installation (full) $15,000 – $40,000
Underlying roof repair found during tear-off $400 – $1,800
Full roof replacement reference (shingle) $8,000 – $20,000

Four things push a metal roof toward the high end. First, square footage and roof complexity: hips, valleys, dormers, and multiple planes all add labor. Second, existing condition: soft sheathing, prior leak damage, or a second layer down means more tear-off and more deck work. Third, panel type and metal: standing seam in aluminum sits at the top, exposed-fastener steel at the bottom. Fourth, permit scope: seismic or structural upgrades that surface during inspection get added by change order, in writing.

Your written estimate lists tear-off, decking allowance, underlayment, flashing, panels, trim, fasteners, cleanup, and disposal. It doesn’t cover structural repairs hidden behind the deck, which is why we open up the roof before finalizing panel orders. Upfront pricing, no surprises. Call (866) 320-2646 and the number you see is the number you pay.

Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

What San Bruno homes specifically do to this job

San Bruno’s housing stock shapes a metal roof job in ways it wouldn’t in a newer suburb. The Crestmoor neighborhood and the streets around it are dominated by post-WWII single-family homes, many built in the 1940s and 50s. The 2010 PG&E gas pipeline explosion triggered a mandatory seismic retrofit and rebuilding wave here, so you’ve got newer seismic-compliant structures alongside older homes that still need foundation bolting, shear walling, and chimney bracing. On a re-roof, that retrofit reality matters: the roof-to-wall connection and chimney flashing are where we often find the old work, and a metal roof’s heavier system puts more demand on that connection than asphalt did.

Then there’s the fog belt. San Bruno sits on the San Francisco Peninsula with cool, damp summers and steady onshore wind from the Pacific. That marine layer accelerates moisture intrusion and rot in exterior wood sheathing and trim, so proper flashing and weather-resistant detailing aren’t optional on a roof here. It’s also why 94066 permits and inspections go the way they do: strict on waterproofing and fastener specs, and digging near the former Crestmoor blast zone triggers PG&E gas line clearance procedures that can delay the job. Contractors working here need to know that before they schedule. We cover San Bruno and the surrounding Peninsula, and if your project grows past the roof, our broader Roofing in San Bruno work and our Roofing service line handle the rest of the scope.

Serving San Bruno, CA – Our Local Coverage Area

We serve San Bruno and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.

Frequently asked – Metal Roofing in San Bruno

Get a free metal roofing estimate in San Bruno

Call (866) 320-2646 for a free on-site estimate on Metal Roofing in San Bruno. We’ll walk the roof, measure it, check the deck, and hand you a written line-item quote with financing options, including 0% financing for 18 months and $1,000 off projects over $10,000. Calls are answered by a live person, 24/7, with no voicemail. Start with one visit and one honest number.

Written by the team at Groundwork Construction Co.

Why San Bruno Chooses Groundwork Construction Co. of San Francisco

We set the standard for metal roofing in San Bruno.

No Change-Order Surprises

The written quote you sign is the price you pay. Anything we find mid-job gets priced and approved by you in writing before we touch it.

Licensed & Insured

Fully certified technicians who meet all local and state licensing requirements.

Upfront Pricing

No hidden fees, no surprises. You approve the price before any work begins.

Guaranteed Work

Every repair and installation is backed by our workmanship warranty and satisfaction guarantee.

How It Works in San Bruno

Getting your metal roofing project started is simple.

1

Call or Request a Free Estimate

Tell us about your metal roofing project and we set up a free visit. No obligation and no hidden fees.

2

Licensed Estimator Visits

A licensed, insured estimator inspects and measures on site, then gives you a clear written price.

3

Scheduled and Done Right

Your crew does the work on the date in your quote, backed by our workmanship warranty and satisfaction guarantee.

What happens when you call

  1. 1
    A real person answersNo phone trees. Talk to a local metal roofing pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    We come out and measureLicensed & insured, at a time that suits you. The visit and the quote are both free.
  4. 4
    You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.

What San Bruno Customers Say

Trusted by homeowners across San Bruno and surrounding areas.

★★★★★

"Found unpermitted work by the previous owner once he opened the wall. He stopped, explained the options and what each would cost, and let me decide rather than making it my emergency."

Marco Castillo
★★★★★

"He told me one part of what I wanted was a bad idea structurally and offered an alternative instead of just taking the money."

Angela Wong
★★★★★

"He pulled the permits himself, scheduled every sub and ran the inspections. I made one decision a week and otherwise stayed out of it, which is exactly what I was paying for."

Robert Sullivan

Ready for Metal Roofing in San Bruno?

Call now for a free estimate, or request one below. Licensed, insured, and here with fast after-hours help in San Bruno.

(866) 320-2646

Request a Free Estimate in San Bruno

Tell us about your metal roofing needs. We'll respond within the hour.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Local Service Coverage
Call Now - 24/7 Dispatch