Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Vanities, Tile & Fixtures in San Anselmo, CA: What It Really Takes
Most vanity, tile, and fixture projects in San Anselmo run $9,000 – $28,000 and take two to four weeks once demo starts, depending on how much plumbing and framing moves. That number covers a full vanity replacement with a new top, floor and wall tile in a standard bath, and a re-fixture of the shower valve, drain, and trim. Call (866) 320-2646 and we’ll walk your space and give you a written, line-item number.
How the work actually runs, stage by stage
We don’t hand you a calendar and disappear. Here’s the sequence we follow on vanity, tile, and fixture jobs, and where your decisions land.
Days 1 – 2: Demo and discovery. The old vanity, top, and fixtures come out, and if tile is being replaced, so does the old floor and wall tile. This is where surprises surface. On older San Anselmo homes we often find a rotted subfloor around the toilet flange, or a shutoff valve that won’t hold. You approve any add before we continue, in writing.
Day 2 – 3: Rough-in and inspection. If we’re moving the vanity or changing the shower valve, the plumber roughs the new drain and supply lines, and the electrician sets a GFCI circuit for vanity lighting and the exhaust fan. If the job touches plumbing or electrical, a Marin County inspection is scheduled here. You’re choosing your valve brand and outlet placement at this point.
Days 3 – 6: Prep and waterproofing. This is the stage that decides whether your tile lasts. Cement board goes up and a liquid or sheet waterproofing membrane goes on all wet walls. We flood-test shower pans overnight before any tile touches them. No shortcuts here, and no tile goes down until that membrane passes.
Days 6 – 12: Tile and vanity install. Floor tile first, then wall and shower tile, grouted and sealed. Vanity cabinet, top, sink, and faucet follow. Stone tops need a template taken after the cabinets are set, so add three to five business days if you’re going with a natural stone counter.
Days 12 – 16: Fixtures, trim, final walkthrough. Shower trim, drain cover, mirrors, hardware, and caulk go in. We test every fixture and run water before we call it done. You sign off on a punch list, and the 730-Day Done Right Promise starts from that day.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The choices that actually move your number
Most of the cost swing on a vanity, tile, and fixture job lives in five decisions. Here’s the honest read on each.
- Vanity cabinet grade: Stock particleboard cabinets run $400 – $900; semi-custom plywood boxes from a KraftMaid-type line run $900 – $2,200; full-custom millwork goes higher. Plywood holds up in a wet bath; particleboard swells at the toe kick over time.
- Countertop material: Cultured marble is the cheapest at $200 – $500 installed. Quartz (Cambria or similar) runs $600 – $1,400 for a standard vanity top and never needs sealing. Natural stone looks great but needs annual sealer and costs more.
- Floor tile: Porcelain in a 12×24 format runs $4 – $9 per square foot for material; a small-hex mosaic is $6 – $14 installed. Porcelain is the safe bet for wet rooms and lasts decades.
- Shower wall tile: Ceramic runs $3 – $7 per square foot, porcelain $5 – $10, and natural stone $12 – $25. Stone demands a more careful install and a stricter waterproofing spec.
- Fixtures: A basic Moen or Kohler faucet is $120 – $280; a premium thermostatic shower valve and trim set jumps to $600 – $1,400. Brushed nickel and matte black finishes cost more than chrome.
If you’re redoing the whole room at once, that scope belongs on our Bathroom Remodeling in San Anselmo page. This work is a piece of that wider project, and it’s the piece most people price first.
What Vanities, Tile & Fixtures costs in San Anselmo, CA
For a standard bath, the full job lands between $9,000 and $28,000. That figure is calibrated to what San Anselmo homeowners actually pay in 2026, not a national average.
- Vanity cabinet and top only: $800 – $3,000
- Floor tile (up to 50 sq ft): $1,200 – $3,500
- Shower wall tile and waterproofing: $2,500 – $6,500
- Fixture package (faucet, shower valve, drain, trim): $800 – $2,200
- Plumbing or electrical relocation: $600 – $2,800
The five things that push a job to the high end:
- Relocating the vanity across the room, which means new drain and supply lines.
- Opening a wall to move the shower valve or add a niche.
- Choosing natural stone over porcelain or ceramic.
- Adding a permit for plumbing or electrical changes (Marin County charges for each).
- Repairing subfloor or framing found during demo, common in pre-1950 flats.
A written estimate from us itemizes every line: demo, labor, materials, permit fees, and haul-away. It does not include things like a new exhaust fan if you haven’t asked for one, or a glass shower door (that’s a separate line). Call (866) 320-2646 for a free walkthrough.
See the difference
Before
After
Before
After
Before
AfterWhat San Anselmo homes specifically do to this job
San Anselmo sits in the San Anselmo Creek watershed at the foot of Mount Tamalpais, and the housing stock dates mostly to early-1900s to 1950s Craftsman and bungalows in the flats along Sir Francis Drake Boulevard. That matters here in a specific way: those older bathrooms often have cast-iron drain lines that are nearing the end of their life, knob-and-tube wiring behind the vanity wall, and subflooring that’s already been soaked. When we open a wall on a flat-lot bungalow, we expect to find something that needs fixing.
Permitting is the other wrinkle. San Anselmo homes near the creek trigger county floodplain review in some cases, and any work that touches plumbing or electrical requires a permit and inspection through Marin County. We pull the permits, schedule the inspections, and don’t hand the job back to you until they pass. That’s the same discipline we apply on Tile Roofing in San Anselmo, where the wet-winter climate creates the same kind of storm-driven timeline.
ZIP codes 94960 and 94979 cover the areas we serve, and we routinely handle jobs along the flats and up toward Sleepy Hollow. If you want the whole-room picture or fixture upgrades that pair with a new enclosure, that lives on our Bathroom Remodeling service page. Homeowners often pair this work with Specialty Roofing in San Anselmo when a bath vent is being re-routed. You’ll find our full coverage on the San Anselmo page.
Serving San Anselmo, CA – Our Local Coverage Area
We serve San Anselmo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently asked – Vanities, Tile & Fixtures in San Anselmo
Most run two to four weeks from demo to final walkthrough. A vanity-only swap can be four to six days; a full floor and shower tile job is closer to the top of that range. The schedule stretches if you choose natural stone or if we find hidden water damage during demo.
Yes, if the job touches plumbing or electrical, which most vanity relocations and shower valve replacements do. Marin County issues the permit and inspects the rough-in. We handle the filing and the inspection scheduling. Tile-only work that stays on existing plumbing often doesn’t need one.
Usually yes. If the drain and supply lines are sound and the toilet and shower aren’t moving, we can set a new vanity over the existing drain in the same spot and re-tile around it. We’ll confirm the condition of the shutoffs and trap during demo before we commit to that plan.
Expect $9,000 – $28,000. A vanity-only replacement is $800 – $3,000; adding floor and shower tile with new fixtures pushes the number into the mid-to-high teens. Natural stone and plumbing relocation both push it higher. Call (866) 320-2646 for a written estimate tailored to your room.
Our 730-Day Done Right Promise covers workmanship on every job, and material warranties come from the manufacturer (Kohler finishes, for example, carry their own coverage). If a tile comes loose or a fixture we installed fails, we come back and make it right. The clock starts the day you sign off.
Get a written number before you commit
We’ll walk your bath, measure the room, and price the vanity, tile, and fixtures line by line so you know exactly what you’re buying before you sign anything. Call (866) 320-2646 for a free on-site estimate. Financing at 0% for 18 months is available, and projects over $10,000 get $1,000 off. Live person, 24/7, no voicemail.
Written by the team at Groundwork Construction Co.