A Groundwork company - serving San Francisco, CA
C

CWS Construction Service in San Francisco, CA

Kitchen remodelingKitchen remodeling
Bathroom remodelingBathroom remodeling
Home additions & ADUHome additions & ADU
RoofingRoofing
Windows & doorsWindows & doors
Driveway & paversDriveway & pavers
FenceFence
Every visit starts with

Free written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled

We have financing partners for your dream remodel*On approved credit; ask us about your options
Get your free estimate

Why San Francisco Homeowners Choose CWS Construction

CWS cabinetry (Cabinet Wholesalers Specialists) is installed, repaired, and refaced in San Francisco by our independent team at Groundwork Construction Co. of San Francisco. We’re an independent CWS service provider, not authorized, sponsored, or warranty-endorsed by CWS, and that independence is exactly why homeowners call us: we work on the boxes, hardware, and finishes themselves, not the showroom sale. CWS is a dealer-network product, so much of what separates a solid install from a callback is how the cabinets behave on the wall – and our technicians have up to 12 years of experience reading that. San Francisco kitchens punish shortcuts. Call (866) 320-2646.

Call (866) 320-2646

Why Trust Groundwork Construction Co. of San Francisco for Your CWS Construction?

Our technicians have worked with CWS Piedmont shaker and slim-shaker doors, the flat-panel European slab lines in thermofoil, the raised-panel traditional styles in cherry and maple, and the drawer and pantry cabinets built on soft-close undermount slides. We know where each of those lines tends to fail first. Thermofoil edges near a range, particle-board sink bases, hinge plates pulling out of tired board – we’ve seen them, diagnosed them, and fixed them across San Francisco. We use CWS-spec hinges, slides, and touch-up finishes where the cabinet line supports them, and quality aftermarket soft-close and full-extension hardware when the original is discontinued or undersized. Every job is covered by our 730-Day Done Right Promise: if it’s not done right, we make it right. Pricing is upfront, and we pull permits where the work calls for it. No guessing, no fine print.

Explore

Styles & brands we work with

  • Kitchen remodeling
  • Bathroom remodeling
  • Home additions & ADU
  • Roofing
  • Windows & doors
  • Driveway & pavers
  • Fence

Common CWS Construction Problems We Fix in San Francisco

Most CWS callbacks we run in San Francisco trace back to moisture, steam, and the realities of older buildings. Here’s what we see most often.

  • Thermofoil delamination near the range. The laminate skin on CWS flat-panel thermofoil doors lifts at the corners after years of steam and grease. Heat cycling softens the adhesive edge, then the skin peels back one corner at a time.
  • Sink-base swelling and joint separation. Particle-board boxes soak up slow leaks and condensation under the sink and along wet walls in older San Francisco kitchens. Once the board swells, the joints separate and the cabinet stops sitting square.
  • Hinge-plate pull-out on soft-close hinges. The soft-close hinge sags or cracks where the mounting plate screws into the cabinet side – often because the board behind it has lost density. The door hangs out of alignment and won’t close flush.
  • Finish checking and yellowing on sun-facing runs. Painted and stained CWS fronts on south- and west-facing walls in pre-war buildings check or yellow, especially when there’s no UV-filtering glazing between the cabinet and the sun.
  • Drawer slide wear. Full-extension slides on CWS drawer and pantry lines loosen and lose their damped close over time, and overweight pans or dishes accelerate it.

CWS Parts & Our Repair-vs-Replace Approach

We use CWS-spec hinges, slides, and touch-up finishes where the line supports them, and quality aftermarket hardware when the original is discontinued or the wrong size for the door. We never force-fit a mismatched hinge – it’s how doors get drilled out and boxes get ruined. Parts are sourced to each job; we’re not a warehouse, so we order what the cabinet actually needs. On repair vs replace, we’re honest: doors, fronts, and hardware are almost always repairable or replaceable, while swollen or delaminated boxes in wet zones usually justify replacement rather than a cosmetic refacing. A typical CWS kitchen call starts with a homeowner noticing a door skin lifting at a corner near the range, or a sink-base cabinet feeling soft underfoot. The usual cause is years of steam and moisture wicking into the box or the thermofoil edge, often paired with a hinge plate that has pulled loose from tired particle board. A qualified local pro confirms the failure mode, replaces or re-skins the affected fronts, swaps in correctly sized soft-close hardware, and – if the box itself is swollen – reframes or replaces the base rather than covering it with new doors. Call (866) 320-2646 to schedule a free estimate.

Our CWS Service Process – Step by Step

  1. 1
    Diagnose. We inspect the cabinet boxes, doors, hinges, and slides, and check for the moisture source behind any swelling. On a CWS sink base, that means looking at the plumbing and the wall, not just the cabinet face.
  2. 2
    Recommend repair or replacement. We tell you which fronts and hardware can be saved and which boxes should come out, with upfront pricing before any work starts.
  3. 3
    Repair or install. We re-skin or replace fronts, swap in correctly sized hinges and slides, and set new CWS cabinets level and plumb – critical in the out-of-square rooms common in San Francisco’s older housing stock.
  4. 4
    Test. Doors, drawers, and soft-close action get cycled and adjusted before we leave.
  5. 5
    Warranty. Every job is backed by our 730-Day Done Right Promise.
Before & after

See the difference

Before - Recent ProjectBeforeAfter - Recent ProjectAfter
Recent Project
Before - Full RestorationBeforeAfter - Full RestorationAfter
Full Restoration
Before - Complete UpgradeBeforeAfter - Complete UpgradeAfter
Complete Upgrade

CWS Products We Service & Install in San Francisco

We handle CWS Piedmont shaker and slim-shaker door styles in painted and stained finishes, the flat-panel European slab cabinets in high-gloss and matte thermofoil, the raised-panel traditional door styles in cherry and maple stains, and the drawer and pantry cabinet lines with soft-close undermount slides. That covers new cabinet installation, refacing, and full kitchen remodeling where cabinets and countertops go in together. If you’re pairing CWS boxes with a new countertop or backsplash, we handle all three in one scope.

We Also Service These Brands

CWS is one line among many we know well. We also install and service KraftMaid, Cambria, Silestone, and Kohler, plus a wider set of verified partners across kitchens, baths, and roofing. That means we’re not tied to any single manufacturer’s answer – we recommend what actually fits your kitchen, your countertops, and your budget.

FAQs – CWS Construction Service in San Francisco

Is Groundwork Construction Co. of San Francisco authorized by CWS? No. We’re an independent CWS service provider – not authorized, sponsored, or warranty-endorsed by CWS. We work on CWS cabinets because we know the lines well, not because we’re a factory rep. Call (866) 320-2646 with questions about your specific cabinet.

Do you use genuine CWS/OEM parts? We use CWS-spec hinges, slides, and touch-up finishes where the line supports them, and quality aftermarket hardware when the original is discontinued or undersized. We’ll tell you which you’re getting before we order.

How long does CWS service take? Hardware and door adjustments are often done in a single visit. Re-skinning fronts or replacing a swollen sink base usually takes longer, and a full kitchen install is scheduled around the wider remodel. We give you a clear timeline with the estimate.

What CWS models/series do you cover? The Piedmont shaker and slim-shaker, the flat-panel European slab in thermofoil, the raised-panel traditional lines in cherry and maple, and the drawer and pantry lines on soft-close undermount slides.

Will service void my CWS warranty? We work in warranty-safe ways and never claim to be a CWS warranty provider. Ask us to document the work so you have records if you ever file a claim.

How much does CWS construction cost in San Francisco? Here are the ranges we work from across the Bay Area market.

Service Typical Range (San Francisco)
Cabinet Installation $4,720 – $15,340
Countertop Installation $2,360 – $7,670
Backsplash Installation $945 – $2,950
Full Kitchen Remodeling $16,520 – $53,100
Small Kitchen Remodel $10,620 – $23,600

Actual cost depends on the cabinet line, whether boxes need replacement, and the room’s condition. Call (866) 320-2646 for an exact quote – estimates are free.

Book Your CWS Service in San Francisco, CA

Whether it’s a peeling thermofoil door or a full CWS kitchen install, our team will diagnose it, price it upfront, and back the work with our 730-Day Done Right Promise. No-hassle upfront pricing, and we pull permits where the work requires them. Call (866) 320-2646 for a free estimate.

Written by the team at Groundwork Construction Co.

Need Construction help nationwide? Licensed & insured · free written estimates
Call (866) 320-2646
Local Service Coverage

Request a Free Estimate in San Francisco

Tell us what you need - Groundwork Construction Co. of San Francisco responds fast. No obligation.

By submitting this form you agree to our Privacy Policy and consent to be contacted by phone, email or SMS about your request, including by local professionals who may handle it.

Prefer to text? Text Us
Call Now - 24/7 Dispatch