Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in San Anselmo, CA
We provide independent CWS window and door service across San Anselmo, and the one thing that separates our work here from a generic install is context: creek-flat bungalows, WUI-rated glazing on the wooded slopes, and original rough openings that were never cut for modern units. Groundwork Construction Co. of San Francisco is an independent CWS service provider – we are not manufacturer-affiliated, sponsored, or authorized by CWS. We read the spec sheets and installation manuals ourselves and adapt them to this town’s floodplain and fire-interface realities. Call (866) 320-2646 and a live person answers, any hour.
Why San Anselmo Residents Choose Us for CWS Service
We know the CWS catalog because it’s most of what we touch on this side of the county: A-Series double-hungs and casements, 4000 Series vinyl single-hungs and sliders, 9000 Series aluminum-clad patio sliders, and the vinyl bay and garden units that show up in a lot of San Anselmo additions. Since we’re independent, we source OEM-compatible sashes, IGUs, balances, rollers and weatherstrip per job rather than out of a local stockpile – no warehouse of parts gathering dust, just the right component ordered for your opening.
Response is where independence pays off. Calls come to a live person 24/7, not a voicemail box that returns on Monday. Every technician is background-checked and arrives in uniform, and our people bring up to 12 years of experience to a CWS service call. All work is covered by the 730-Day Done Right Promise, which is one of the longest workmanship guarantees in residential construction. That’s the standard we hold on a single fogged sash or a full San Anselmo re-window.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Solve in San Anselmo
These are the failures we see most across San Anselmo. Most trace back to how a component meets this town’s wet winters, summer sun, and older wall assemblies.
- Fogged IGU seals on A-Series and 4000 Series double-hungs. Marin’s wet winters followed by hard summer sun cycle the sealant until the desiccant saturates and the glass goes hazy. In San Anselmo, units on south and west elevations fog first because they take the sun load after the rain.
- Sill and lower-jamb rot on clad and veneer units. Creek-flat bungalows hold splash-back and chronic damp that never lets the frame dry. We find soft wood at the sill on a lot of San Anselmo homes near the creek corridor long before the homeowner notices anything inside.
- Water intrusion behind nail-fin flanges. When the original installer skipped pan flashing and sealant detailing on stucco or siding walls, water tracks behind the flange and shows up as interior wall staining below the head. This is a discoverable cause, not a mystery leak.
- Sliders that jump or bind on worn rollers and tracks. Older 9000 Series patio doors carrying heavy aftermarket screen panels wear the roller and track faster. On San Anselmo’s grades, a slightly out-of-level opening makes the bind worse.
- Failed weatherstrip and balance hardware. The soft goods go first in a marine-influenced climate. A sash that won’t stay up or a door that whistles in an atmospheric-river storm usually needs hardware, not glass.
CWS Service in San Anselmo: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes CWS work in San Anselmo more than anything else: a large share of the flats stock is early-1900s to 1950s bungalow construction, which means window replacement here frequently runs into original rough openings, single-pane wood sash, and no modern flashing at all. CWS re-windows on these homes often require re-framing and pan-flashing work that newer homes up toward Sleepy Hollow and the Ross border simply don’t need. That’s the difference a generic CWS page leaves out. When we measure a 94960 bungalow, we’re planning for a rough opening cut a century ago, not a clean modern frame.
Layer on the geography. San Anselmo sits in the San Anselmo Creek watershed at the foot of Mount Tamalpais, and the downtown corridor along Sir Francis Drake Boulevard has flooded repeatedly, including the 1982 and 2005 storms. Work near the creek can trigger county floodplain and creek-permitting review before a footing is poured. On the wooded slopes, WUI ignition-resistant glazing rules apply. Two very different sets of requirements, one small town.
What to look for in a CWS installer here
Ask whether the installer will pull the trim before quoting. On a San Anselmo creek-flat bungalow, the real scope usually hides behind the interior casing: a failing IGU seal combined with a nail fin set without pan flashing. A qualified independent installer measures the rough opening, replaces the sash or whole unit with OEM parts where possible, and re-details flashing and sealant so the wall and the WUI-rated glazing both hold through an atmospheric-river season. One who quotes off a photo isn’t seeing your wall.
CWS Models & Products We Service in San Anselmo
We service and install the CWS A-Series double-hung and casement replacement units, the 4000 Series vinyl single-hung and slider windows, the 9000 Series aluminum-clad sliding patio doors, and CWS vinyl bay and garden window units. Our parts approach is straightforward: use CWS OEM sashes, IGUs, hardware and weatherstrip where the frame and cladding are sound, and quality aftermarket balances, rollers and gaskets where OEM is discontinued. When the frame, flashing detail or wall interface is compromised, replacement usually beats repeated repairs. We don’t claim to stock CWS parts locally – each component is ordered to the job. For the full picture of what we handle, see our CWS service page.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in San Anselmo
Upfront pricing, no surprises: the number you see is the number you pay. A free estimate here includes trim removal to expose the flashing detail, rough-opening measurement, and a line-item quote. What drives cost is how much re-framing and pan-flashing the old wall demands, glazing rating for WUI, and whether we save the frame or replace the unit.
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Bathroom Remodel | $9,000 – $28,000 |
| Walk-In Shower Installation | $4,500 – $12,000 |
Financing is 0% for 18 months, and projects over $10,000 take $1,000 off. Call (866) 320-2646 for a free estimate – no charge, no pressure.
Serving San Anselmo, CA – Our Local Coverage Area
We serve San Anselmo and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CWS Construction in San Anselmo
Not always, but it can. A like-for-like window swap usually doesn’t, while anything that alters the wall opening near the creek corridor may trigger county floodplain or creek-permitting review. We walk the permit question with you before ordering parts. Call (866) 320-2646 for an exact quote – estimates are free.
Yes. Homes in the WUI along the wooded slopes toward Mount Tamalpais generally need ignition-resistant glazing and exterior components. We spec units to that standard rather than swapping in standard glazing.
Marin’s wet winters and summer sun cycle the IGU sealant until the desiccant saturates and the glass goes hazy. Creek-flat homes with chronic damp see it sooner. A sash swap with an OEM IGU fixes it when the frame is still sound.
Most San Anselmo bathroom updates run $9,000 – $28,000, and a walk-in shower install runs $4,500 – $12,000; the window replacement is often bundled in. Call (866) 320-2646 for an exact quote – estimates are free.
Often, yes. If the frame and cladding are sound, OEM sashes, hardware and weatherstrip restore function. When the frame or flashing detail is compromised in an early-1900s wall, replacement usually wins.
Service Areas Near San Anselmo
If you’re just outside town, we also work in San Rafael and Larkspur, plus Fairfax, Mill Valley and the Ross border. The same creek-flat and hillside realities apply across these areas. See our San Anselmo service area page for coverage details.
Book Your CWS Service in San Anselmo Today
Fogged sash, a slider that binds, or a wall stain below the head – none of it gets better with another rainy season. Call (866) 320-2646 for a free estimate. A live person answers 24/7, and we can schedule same-day availability when the job allows.
Written by the team at Groundwork Construction Co. of San Francisco.