Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & pavers
FenceFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
CWS Construction in Corte Madera, CA
We provide independent CWS service across Corte Madera, and the thing that makes our CWS work here different is simple: we install these window and door lines with the flood-zone elevation details the town’s creek flats require, not the generic hillside method that works a few blocks uphill. That single distinction decides whether a CWS window in Corte Madera lasts thirty years or rots from the sill up in eight. Groundwork Construction Co. of San Francisco is an independent CWS service provider, not manufacturer-affiliated or authorized. Call (866) 320-2646 for a free estimate.
Why Corte Madera Residents Choose Us for CWS Service
Corte Madera homeowners call us because we’ve handled these window and door lines long enough to know where they actually fail, not just where the catalog says they should. The technicians we work with have up to 12 years of experience installing and servicing CWS assemblies, and they know the difference between a 400 Series sill that’s still structurally sound and one whose rot has already climbed into the rough opening. That judgment call saves you from paying for a full unit swap when a reset and new flashing would have done the job.
We use OEM-compatible parts matched to the model and vintage, sourced per job rather than pulled off a shelf. Every installation is covered by our 730-Day Done Right Promise, and calls are answered by a live person 24/7, so you’re not waiting on a voicemail when a storm-driven leak shows up in January.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
Common CWS Construction Problems We Solve in Corte Madera
These are the CWS failure modes we see most often in Corte Madera, each tied to a local cause rather than a generic defect.
- Rotted 400 Series wood-clad sills. Creekside winter humidity sits against flood-zone foundations that stay seasonally damp, so the wood cladding wicks moisture and rots from the bottom of the sill upward. By the time you see soft wood, the question is whether the rot has reached the rough opening.
- Warped 200 Series vinyl on hillside south walls. UV and thermal cycling on exposed splits above town distort the vinyl frames and break down the weatherseal, letting driven rain past the glazing gasket. That’s an installation-and-exposure problem, not a bad window.
- Compromised 600 Series impact glazing. Impact units often get set with standard shims and sealants instead of the specified setting blocks, which quietly voids the impact rating at the perimeter. The glass is fine; the install failed it.
- Corroded sliding patio door rollers and tracks. Marine air off the marsh binds these up fast, especially on west-facing walls. Hard to slide, then hard to seal.
- Failed perimeter flashing after flood-elevation rebuilds. When a flat near the Town Center gets raised, the window flashing detail has to change with the foundation. Older assemblies that were never updated to flood-compliant detailing leak at the corners.
CWS Service in Corte Madera: What Local Conditions Mean for Your Equipment
Here’s the fact that shapes every CWS installation in Corte Madera and doesn’t apply the same way in the hills: the town’s low-lying flats near Corte Madera Creek and the Town Center sit in designated FEMA flood zones, so windows and doors on those homes have to be elevated and sealed to floodproofing standards. A standard CWS replacement window install here frequently needs raised sills and flood-compliant pan flashing. Hillside jobs a few blocks away never touch that requirement, because they’re dealing with slope drainage instead of elevation. That split is why we look at your address before we look at the unit. A 400 Series sill reset on a creekside rancher gets built to shed water above a flood elevation; the identical window on a hillside split-level gets built to handle driven rain and thermal expansion. Same brand, same product line, two completely different installation specs. Getting that wrong is how a good window fails early in Corte Madera.
CWS Models & Products We Service in Corte Madera
We work on the full CWS residential window and door range sold in Marin: the 400 Series aluminum-clad wood windows, the 200 Series vinyl windows, the 600 Series impact-rated windows, and both the hinged and sliding patio doors. Our parts approach is straightforward. Any unit still under warranty gets CWS OEM sills, setting blocks, and weatherseal kits so the coverage stays intact. For older 200 and 400 Series windows where the frames are structurally sound, high-quality aftermarket rollers and gaskets are an honest repair. We only recommend replacement once rot or warp has reached the frame itself. Parts are ordered for each job; we don’t claim local stock.
See the difference
Before
After
Before
After
Before
AfterCWS Service Pricing in Corte Madera
Most CWS window and door work in Corte Madera lands in these ranges. Flood-zone elevation details, hillside access, and impact-rated upgrades all move the number, which is why we quote in writing before anything gets ordered.
| Service | Typical Range |
|---|---|
| Window Replacement | $4,500 – $15,000 |
| Impact Window Installation | $8,000 – $25,000 |
| Roof Replacement | $8,000 – $20,000 |
| Roof Repair | $400 – $1,800 |
Your free estimate includes a full inspection of each unit, a check of whether rot has moved past the sill, and a line-item quote with no change orders hidden behind it. Call (866) 320-2646 to schedule yours.
Serving Corte Madera, CA – Our Local Coverage Area
We serve Corte Madera and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs – CWS Construction in Corte Madera
Yes. Any window on the low-lying flats near the creek and Town Center typically needs elevated sills and flood-compliant pan flashing to meet FEMA floodproofing standards, which goes beyond a standard replacement install. We check your specific address before quoting. Call (866) 320-2646 to confirm what your unit needs.
Because wood cladding wicks moisture from below when the foundation stays seasonally damp, and creekside humidity in Corte Madera keeps it damp. The rot starts at the bottom of the sill and climbs. If the frame is still sound, a reset on a raised sill with proper flashing and marine-grade sealant stops it. Once rot reaches the rough opening, the unit has to go.
They’re a reasonable choice on shaded elevations, but exposed south-facing walls on the splits above town get enough UV and thermal cycling to warp vinyl frames and break the weatherseal. We look at the orientation before recommending them. Where exposure is heavy, impact-rated or clad units hold up better.
Most of the time, yes. Corroded rollers and tracks on west-facing doors near the marsh are usually the whole problem, and new rollers plus a track and weatherseal refresh bring the door back to a smooth, sealing state. We replace the door only when the frame or glazing has failed.
Check the perimeter. If the unit was set with standard shims and sealant instead of the specified setting blocks, the impact rating is compromised at the edges even though the glass itself is fine. A short inspection confirms it. Call (866) 320-2646 for a free estimate and a straight answer.
Service Areas Near Corte Madera
We work CWS installations and repairs throughout Corte Madera and into adjacent Marin communities, including Larkspur to the south, Mill Valley to the west, and Tiburón and Tamalpais-Homestead Valley. San Francisco and Daly City are also within reach. Reach out through our Corte Madera service area to confirm coverage.
Book Your CWS Service in Corte Madera Today
If your CWS windows, patio doors, or roof are showing their age, call (866) 320-2646 to schedule a free estimate. A live person answers around the clock. We’ll check the units, explain what’s actually failing, and give you a written number for the fix. New installations are covered by the 730-Day Done Right Promise, and you can explore CWS service with the confidence of a written guarantee behind it.
Written by the team at Groundwork Construction Co.