Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Pacifica, CA: What It Costs and How It Holds Up in Coastal Wind
A chain link fence in Pacifica typically runs $3,500 to $9,000 for a standard residential yard, and most jobs are finished in two to four working days once we’ve pulled the permit and marked the line. The number moves with footage, height, gauge, and terrain, but the part that matters most on the San Mateo coast is corrosion and wind exposure. Call (866) 320-2646 and we’ll walk your property, measure the run, and give you a fixed written price before anything gets ordered.
How a Chain Link Fence Goes In, Start to Finish
We don’t hand you a clipboard and disappear. Here’s the actual sequence, what happens, and where you make decisions.
Stage 1: Site walk and line layout (day one, about 60 to 90 minutes)
We walk the property line with you, confirm where the fence sits relative to your plat and your neighbor’s, and flag anything underground. Your decision here: exact line placement where lots are tight, and gate locations. On sloped Pacifica lots this is where we figure out whether the fence steps down the grade or follows it with racked panels.
Stage 2: Utility locate and permitting (one to three weeks, mostly waiting)
We call for the free underground utility mark before anyone digs. If your run crosses into the coastal permit review that Pacifica applies to bluff-side and hillside lots, that clock runs longer. Your decision: whether to submit now or stage the fence around it.
Stage 3: Demolition and post setting (day two to three)
Old fencing comes out, holes get dug and set in concrete below your local frost and drainage line, and posts go in plumb and on grade. Posts cure before the fabric goes on. Your decision: none at this stage, we handle it.
Stage 4: Framework and fabric (day three to four)
Top rail, tension bands, and fabric go up, then gates get hung and adjusted so they swing clean. We tension to spec so the mesh doesn’t sag after the first storm.
Stage 5: Walkthrough and warranty paperwork (about 30 minutes)
We walk the finished run with you, confirm gates and latches, and hand you the written 730-Day Done Right Promise. Anything that isn’t right gets fixed, not argued about.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Options You’ll Actually Choose Between
Chain link is a simple product with real differences under the surface. Here’s what we go over with you before ordering.
- Coating: galvanized steel is the baseline and the cheapest. Vinyl-coated mesh costs more upfront but holds up far better against Pacifica’s salt fog and it’s the call we usually recommend within a mile of the water.
- Wire gauge and mesh size: lighter gauge is fine for a boundary marker; heavier gauge resists dogs and kids. Standard 2″ diamond mesh vs. 1-3/4″ is a small dollar difference for a much stiffer panel.
- Height: 4′ is the low-cost residential standard. 5′ to 6′ is a modest step up and reads as a real barrier. Taller runs need larger posts and deeper footings.
- Post and top rail weight: this is where cheap bids get cheap. Schedule 20 pipe feels solid; thinner wall pipe dents and bows under wind load. Ask for the spec in writing.
- Gates: a single walk gate is standard, drive gates need heavier frames and bigger footings. We set the hinges so the gate doesn’t drag after a wet season.
- Finish color: vinyl-coated black and green blend into landscaping better than bare galvanized, which matters on visible side yards.
What a Chain Link Fence Costs in Pacifica, CA
Most residential chain link here lands between $3,500 and $9,000, and a written estimate breaks out the pieces so you can see where the money goes.
| Line item | Typical range |
|---|---|
| Standard residential chain link, 4′ to 5′, coated | $3,500 – $6,500 |
| Upgraded 6′ run with heavier posts and gates | $5,500 – $9,000 |
| Drive gate or double gate addition | included or quoted separately |
| Removal of existing fencing | quoted by volume |
What pushes a job to the high end: longer footage, 6′ height with Schedule 20 posts, sloped or stepped terrain, removal of old fence and concrete, and coastal permit conditions on bluff or hillside lots. What keeps it low: a short flat run, standard 4′ height, and existing posts you want to keep. A written estimate includes posts, concrete, fabric, rails, hardware, labor, and cleanup. It doesn’t include utility relocation, a survey if the line is in dispute, or neighbor cost-sharing unless you arrange it. Upfront pricing means the number you see is the number you pay.
One honest note: on any job involving an electrical line, gas line, or an existing panel, we flag it and stop. Don’t dig near a service line on your own. We call the locate and we work around utilities with a trained eye.
See the difference
Before
After
Before
After
Before
AfterWhat Pacifica Homes Specifically Do to This Job
Pacifica is built on coastal bluffs and steep marine-terrace hillsides along the San Mateo coast, so fence work here runs into things inland Peninsula cities rarely see. Coastal development permits, erosion-control measures, and sometimes geotechnical review come up before a run on a bluff-edge lot can proceed. The fog belt and salt-laden onshore winds are the other half of it. A bare galvanized post that lasts fifteen years in San Bruno can rust through faster on a west-facing line near Esplanade or the Rockaway bluffs, which is exactly why we push vinyl-coated pipe and mesh on ocean-side runs. Winter storms bring heavy runoff downslope, and a post footing that looked solid in August can wash out by February. Our technicians have up to 12 years of experience and know to set footings deeper and account for slope drainage on hillside lots.
Much of the housing stock is 1950s – 70s stucco ranch and split-level homes with wood decks and T1-11 siding, plus older beach cottages around Linda Mar. Those properties often come with deferred decay and buried old fence footings that add removal cost.
If your chain link run is part of a full Fence Installation in Pacifica project, or you’re pairing it with Concrete Driveways & Concrete Work in Pacifica, we scope it all in one estimate, and homeowners often pair this with Asphalt Driveways & Resurfacing in Pacifica to finish the frontage. See our Fence Installation service for the full picture, and check what we cover across Pacifica.
Serving Pacifica, CA – Our Local Coverage Area
We serve Pacifica and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Pacifica
Most residential runs are done in two to four working days once the permit and utility locate are cleared, with the permit wait itself often taking one to three weeks. The install is quick; the permitting is the slow part. Call (866) 320-2646 for a timeline on your specific property.
It depends on height, location, and whether the lot sits in the coastal zone, so plan on checking before you build. Bluff and hillside lots often require a coastal development permit and erosion-control conditions. We pull the permits and pass the inspections as part of the job, so call (866) 320-2646 and we’ll confirm what your property needs.
No. Our written estimate is fixed: the number you see is the number you pay, with no surprise add-ons. The only thing that changes a price is a change you request. Call (866) 320-2646 for an upfront quote.
Expect $3,500 to $9,000 for a standard residential run, with the high end driven by length, 6′ height, heavier posts, slope, and old fence removal. Call (866) 320-2646 for an exact quote and a written line-item breakdown.
Every chain link fence we install is covered by our 730-Day Done Right Promise: if it isn’t right, we make it right. We build with quality materials so it holds up to the coast. Call (866) 320-2646 to schedule your free on-site estimate.
Get a Free Chain Link Fence Estimate in Pacifica
Ready for a fence that holds up to the salt and the wind? Call (866) 320-2646 and a live person answers, day or night. We’ll set a free on-site estimate, measure your run, walk the grade and permit questions with you, and hand you a written upfront price before you commit. From line layout to final walkthrough, we do it right, and we back it in writing.
Written by the team at Groundwork Construction Co.