Fence
Kitchen remodeling
Bathroom remodeling
Home additions & ADU
Roofing
Windows & doors
Driveway & paversFree written scope consultation - allowances, timeline, and change-order rules on paper before a single trade is scheduled
Chain Link Fence in Daly City, CA: What It Costs and How Fast It Goes In
A chain link fence in Daly City, CA typically runs $3,500 – $9,000 installed, and a standard residential lot is usually finished in two to four working days once materials land on site. Cost, height, and how much hillside grading your slope demands are what separate a small backyard run from a full perimeter job on a steep street. Call (866) 320-2646 for a free on-site estimate with line-item pricing.
How We Build a Chain Link Fence in Daly City, Step by Step
Every job follows the same sequence, and knowing it up front means you know exactly when you have to make a decision and when you don’t.
Day 1: Mark-out and utility check
We walk the property line with you, confirm where the fence goes, and call for utility locates before a shovel touches dirt. On tight Daly City lots this is the stage where we sort out the fence line against a neighbor’s wall, because a few inches matter and nobody wants a dispute after the posts are set. You sign off on the layout before we proceed. Allow a day, sometimes two if the locate takes time.
Days 1 – 2: Demo and post-hole prep
Old fencing comes out and gets hauled away. Posts get dug or augered to depth, which is where a Daly City hillside changes everything: on a grade, we step the fence in panels rather than trying to run it level, and that means more terminal posts and more concrete per hole. Chain link likes a solid, well-drained footing; we dig deeper than the flatland minimum on saturated slope soil so the posts don’t heave after a wet winter. You decide at this stage whether you’re replacing in the same line or shifting it.
Days 2 – 3: Posts set and concrete cured
Line posts and terminal posts go in and get set in concrete. The concrete needs to cure before we tension anything, so there’s a real pause here. This is not a stage to rush. If you’re pairing this with a hardscape rebuild along the same property line, homeowners often pair this with Concrete Driveways & Concrete Work in Daly City so the grading and drainage get handled once instead of twice.
Days 3 – 4: Framework, mesh, and tensioning
Top rail, tension wire or bottom rail, and the mesh go up, then get tensioned. This is where a chain link fence either feels solid or doesn’t. You choose the fabric height (4-foot, 5-foot, or 6-foot) and whether you want a top rail only or a bottom rail too. A 6-foot run with a bottom rail and tension wire holds up far better against wind-driven rain off the Pacific than a bare 4-foot fence.
Final day: Gates, hardware, and walkthrough
Gate posts, hinges, latches, and any barbed or privacy slats go on, then we walk the whole run with you. Anything that doesn’t tension right or swing right gets corrected before we call it done. This entire project falls under our 730-Day Done Right Promise, so if a latch sags or a post settles, we come back and fix it.
Styles & brands we work with
- Kitchen remodeling
- Bathroom remodeling
- Home additions & ADU
- Roofing
- Windows & doors
- Driveway & pavers
- Fence
The Chain Link Fence Options You’ll Actually Choose Between
- Galvanized steel vs. vinyl-coated. Standard galvanized is the budget route and lasts well in dry climates, but Daly City’s fog and salt air eat at bare zinc over time. Vinyl-coated (usually green or black) costs more up front and holds up noticeably longer on the coast. Worth it here.
- Fabric height: 4, 5, or 6 feet. Higher means more material and more wind load on the posts. For a backyard with a slope, 6-foot is the common pick; a low front-yard run often stays at 4-foot.
- Gauge of the mesh. Thicker wire (lower gauge number) resists bending and dog damage. Cheaper thin mesh looks fine on day one and looks tired in three years.
- Top rail vs. top-and-bottom rail with tension wire. Bottom rail adds cost but keeps the fabric from pulling loose at the base, which matters on saturated hillside soil.
- Privacy slats. Inserted into the mesh for screening. They add cost and catch wind, so post sizing has to account for them.
- Gate type. Walk gate, double drive gate, or a self-closing gate. Each changes the hardware and the terminal post requirements.
What a Chain Link Fence Costs in Daly City, CA
Expect $3,500 – $9,000 for a residential chain link fence in Daly City, with most single-family lots landing in the middle. The low end is a straightforward run on flat ground with a single walk gate; the high end is a full perimeter on a steep slope with multiple gates and coated fabric.
- Linear footage. The single biggest lever. Longer runs cost more in material and labor, roughly proportionally.
- Slope and soil. A hillside lot means stepped panels, deeper footings, and more terminal posts. This is the variable that most often pushes a Daly City job toward the top of the range.
- Fabric and coating. Galvanized vs. vinyl-coated, and wire gauge, move the material line.
- Gates. Each gate is its own mini-assembly with its own hardware and a heavier post.
- Access and demo. Tight lots where equipment can’t get to the line, plus removal of existing fencing, add labor.
A written estimate should list linear footage, fabric type and gauge, post spacing and depth, number and type of gates, concrete, and haul-away. What it typically doesn’t cover: removing an old concrete footing that’s bigger than expected, retaining-wall work if the slope needs it, or legalizing a fence line that crosses a property dispute. We flag those before we start, not after. Upfront pricing, no surprises.
See the difference
Before
After
Before
After
Before
AfterWhat Daly City Homes Specifically Do to a Chain Link Fence Job
Daly City’s dense rows of post-war stucco-over-wood-frame homes sit on steep, fog-soaked slopes, and that shapes every fence we build here. On the steep streets off Mission and Westlake, contractors routinely find original redwood framing and old fence lines that have quietly rotted from decades of coastal moisture, and those have to come out before new posts go in. Lots are tight, so the property line often runs within a few feet of a neighbor’s wall, and that turns layout into an access puzzle. Persistent fog, wind-driven rain, and cool damp air mean hillside soils stay saturated longer, which is exactly why we dig deeper footings and step panels on grade. Most of the housing stock dates to the 1940s – 1960s, so a lot of the fencing coming out was never engineered for a wet slope to begin with. Permits and property-line checks are part of the plan, and if the job grows into a full boundary rebuild, that’s Fence Installation in Daly City territory.
Serving Daly City, CA – Our Local Coverage Area
We serve Daly City and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
Frequently Asked – Chain Link Fence in Daly City
Most residential chain link fences take two to four working days, with a cure pause for the post concrete between setting posts and tensioning the mesh. Slope and gate count stretch that; a flat, single-gate run can finish on the shorter end. Smaller jobs are often completed in a single visit plus the cure. Call (866) 320-2646 for a timeline on your specific lot.
Fence permits in Daly City depend on height, location, and whether the fence sits on a slope or near a property line, so the honest answer is: check before you build. Height limits and setback rules vary, and a fence on a retaining wall or a steep grade often needs review. We walk through the permit scope with you during the estimate so nothing gets built that has to come down. Call (866) 320-2646 to talk it through.
Usually yes. A chain link fence is a surface and footing job, so it doesn’t require moving plumbing, electrical, or structure. On a tight Daly City lot we may need to hand-dig near a wall or a mature tree, but the work stays at the fence line. If a buried line is in the way, the utility locate on day one tells us before we dig. Call (866) 320-2646 for an on-site look.
A chain link fence in Daly City runs $3,500 – $9,000 installed, depending on linear footage, slope, fabric type, and gates. The biggest cost driver on a hillside lot is footing depth and stepped panels. Call (866) 320-2646 for a free estimate with line-item pricing.
Our chain link fence work is covered by the 730-Day Done Right Promise: if it’s not done right, we make it right. That covers our workmanship, including posts that settle and hardware that fails. Material warranties come from the manufacturer and vary by fabric type. Call (866) 320-2646 to go over what’s covered on your job.
Get a Free On-Site Estimate for Your Chain Link Fence in Daly City
We’ll come out, walk the property line, check the slope and soil, and hand you a written line-item estimate: footage, fabric, posts, gates, and concrete, with nothing hidden. Estimates are free, financing is available at 0% for 18 months, and projects over $10,000 get $1,000 off. Call (866) 320-2646 and a live person answers, any hour. Our fence installation team covers Daly City and the surrounding hills, and our technicians bring up to 12 years of experience along with background-checked, uniformed crews.
Written by the team at Groundwork Construction Co.